Recasting the Damaged RCC Roof Slab, Providing Maintenance Repair Works and Construction of Additional Room at Corporation Quarters (D. No. 31,32,33 and 34 ) at Tatabad 3rd street in Ward No.50, Central Zone

Amount

Dismantling the damaged RCC Slab with intial lead and lift including all labour charges etc complete

Dismantling the damaged weathering course and pressed tiles with intial lead and lift including all labour charges etc., completed

Dismantling the existing damaged brick wall with initial lead and lift including all labour charges etc., completed

Earthwork excavation in all soils including all initial lead and lift etc complete

Providing plain cement concrete 1:4:8 using 40mm hbg metal includign alll cost etc complete

R.C.C 1:1/2:3 mix using 20mm hbg metal including all cost etc complete

Centering with MS sheet sides and supprots for R.C.C plinth beam and footing concrete including all cost etc complete

Centering with MS sheet sides and supports for R.C.C column concrete including all cost etc complete

Centering with MS sheet sides and supports for R.C.C Roof beams and slabs including all cost etc complete

Supply and filling with well gravel layer by layer including cost of watering and consolidation and ramming etc complete

Supply and fabrication of RTS rods at various dia including all necessary cutting bending and tying etc complete

Brick work in C.M 1:5 mix using second class table moulded bricks including all cost etc complete

Supply of P.V.C pipe and specials of approved quality including all cost etc complete

110 mm dia PVC pipes 6 Kg/Cm2

110 mm dia PVC Elbow

Supply and erecting pull and push type manually operated rolling shutter with ISI make of approved size and section using 18 GI sheets. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, tranporation charges etc.

WEATHERIN COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly toilime being 32:12.5 by volume and laid in a single layer and consoldiated tot he requiresd designed and finsihed thickness by beating the concrete with wooden beaters of approved apttern keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification etc., complete as directed by the departmental officers

Plastering for RCC exposed surface such as sunshade, beam, roof ceiling plastering 1:3 to 10mm thick including all cost etc., complete

Finishing the top of roof with one course of Pressed tiles of size 23cm x 23cm of approved quality laid in cement mortar 1:3 (One cement and three sand)12mm thick mixed with water proofing compound convforming to I.S at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles, complete complying with standard specification and as directed by the departmental officers.

Plastering in CM 1:5 to 12mm thick including all cost etc complete

Supply and fixing of mild steel door using all round "L" angle 25 x 25x 6mm thick cross bracing 20 x 6mm M.S Flat with necessary locking arrangements including cost and conveyance etc., size 0.60 x 1.85

Conveyance of excavated earth and dismantled depreeze from site to 15km including all cost etc complete

Supply and run of 2 of 4 sq mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid piep on wall and ceiling with continuous earth wire conncection of 14SWG TC wire with painting of suitable colour

Wiring with 2 x 1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC acessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC open light/ fan point (For electronic regulator)(5 Points per coil)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated unsheathed single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories inflush with wall with 150mmx100mmx75mm MS switch box with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.

Supply and fixing of double pole 32 Amps MCP 240 V /415 HZ -AC supply on suitable TW board including all cost etc complete

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications.(SD-83)

Supply and fixing of 20watts power sacer CFL lamp with necessary wall mount sockets and accessories including all cost etc complete

Painting with Emultion paint two coats for walls layer by layer with equal intervals of time using good quality approved colour paint including all cost etc complete

DADDOING THE WALLS with first quality approved WHITE GLAZED TILES of size 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Paving the floor with vitrified Floor Tiles of size 60 x 60 cm. of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60x60 cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc. complete complying with standard specification.