SPL REPAIR TO BLDG NO P-425 AND P-426, MW AND RW AT SRI GANGANAGAR MIL STN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles grade, (300x600)x7mm thick as on vertical surfaces like dados or skirting over and including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

Demolition of cement Concrete(un-renforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M&L for 25 thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed.

M&L for 10 mm thick vitrified Double charged/Ultracharged ceremic tiles (square / rectangular) area of each tile (size 1200 X 600mm) exceeding 0.42sqm but not exceeding 1.0 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair complete all as specified and directed.

All as per Srl item No. 6.0 above but on vertical surfaces like skirting / dado etc over and including 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20 mm thick over 20 mm thick screed bedding in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing, rounding of edges (moulding of edges) and polishing complete all as specified and directed.

All as per Srl item No-8 above but in vertical surfaces like dado or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M&L for granite (of any type) 20 mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, rounding of edges (moulding of edges) and polishing complete laid over and including 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles , single layer on roofs complete all as specified and directed.

Demolition of old mud phuska, removing rubbish of the premises cleaning roof surface complete all as specified and directed.

M&L for PCC 1:2:4 type B1(20 mm graded aggregate) as in PCC padding to maintain slope and roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Providing and applying APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (wt n.less than 150gm/sqm) laid on primed surface by forced application keep overlap margin for minimum 100mm heat both the overlaps and use round tipped trowel to seal overlap excess compound shold be smoothened and pressed into seam using hot trowel and including & applying a coat of bitumen based primer @ 3-5 sqmtr/ltr including cleaning surfaces with wire brush / coir brush to free from all loose materials like dust, dirt etc and make wattah / coving at all horizontal and vertical joints to avoid right angle turning complete all as specified and directed.Note: Work shall be executed through authorised applicator of the manufacture before execution of work.

S&F for Heat Resistant Terrace tiles (300mm X 300mm X 8-10mm) with SRI (solar refractive index) more than 78 on waterproof and sloped surface of terrace laid on 15mm thick cement sand mortar 1:4 and grouting the joints with mix of white cement & marble powder in ratio 1:1, including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed.

Dismantling water tank of capacity exc 250 Ltr and n exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank white colour 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed.

S & F of Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame shall be moulded with fire retardant grade unsaturated polysteresin and chopped mat.Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides MS stay shall be provided at the bottom to steady the frame complete as specified and directed by the manufacture and directed

S & F 30mm thick glass fiber reinforced plastic (FRP) panelled door shutter of required color and approved brand and manufacture, made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels conforming to IS:14856-2000 including fixing to frame complete all as specified by the manufacture and directed by Engineer-in-charge.

S&F Anodised Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Anoidised Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S&F Aluminum Grill powder coated of approved design/pattern with aperture size 50 mm and wire dia 5 mm fixed with Aluminum Frame complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

M&L for mild steel work as in frame work/guard bar for door and window and as similar work including cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed .

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5sqm but n.exc 4.0sqm each complete all as specified and directed.

S & F pressed steel door frames with one or more rebates including necessary fixing lugs, lock strike plate etc., size of frame 125x60mm complete all as specified and directed.

S & F pressed steel door frames with one or more rebates including necessary fixing lugs, lock strike plate etc., size of frame 105x60mm complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint (ordinary tint) over one coat of red oxide primer on new steel surface over 10 cm width or girth, not otherwise described including preparation of surface complete all as specified and directed.

S & F IInd class hardwood 35mm thick factory made gauged skelton shutters open rebated and prepared to receive gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for receiving gauze,Size of members of shutter as specified in SSR Part-I Section 8, cluase 8.24(a) supplied and fitted to chowkhats and complete all as specified and directed.

S & F 35mm thick factory made IInd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 100 mm Butt hinges extrunded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed.

S& F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 mm mild steel sliding door bolts, clip type, stone enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate complete all as specified and directed.

S & F 150mm long aluminium handles D type with back plate , anodised complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed.

S&F in repairs, 15mm bore fancy type Angle valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends complete all as specified and directed.

S&F in repairs SS soap dish of any size fixed with screws complete all as specified and directed.

S&F in repairs grating doom 100 mm dia of stailess steel with and without hole complete all as specified and directed.

S & F in repair stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed.

S & F in repair stainless steel towel ring min 30 mm dia including brackets complete all as specified and directed.

S&F in repairs fancy type long body bib taps,15 mm cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI 'P' trap/S trap complete all as specified and directed.

S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

S&F, in repair vitreous china wash hand basin Oval type, including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) including 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed.

S&F in repairs low density polyethylene pipes (LDPE) 32 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed.

Supply only fancy type swan neck pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore dia with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F hat pegs and hooks (cloth hanger with six peg set each) complete all as specified and directed.

Dismantling cast iron pipe of any dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S&F 100mm bore cast iron 'Y' tee sand cast fitted with oval access door complete all as specified and directed.

M&L for CI floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed.

M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed.

Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed.

Taking up or down for 25mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromimum plated hinging device & trap and including jet spray/nozzle with pvc pipe 15mm bore dia complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in each pane of any size complete all as specified and directed.

S&F Harrison rails mild steel chromium plated with fixing brackets, stops, rollers etc 20mm bore dia complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in bay n.exc 2.5m length complete all as specified and directed.

Demolition of RCC as in Roofs, floors ( other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed.

M&L for RCC nominal mix 1:1 1/2: 3 (using 20mm graded aggregate ) as in slabs suppotred on walls, beams and columns complete all as specified and directed.

S & F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Taking down cement plaster of any description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & fair without using extra cement complete all as specified and directed.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed.

M&L two coat of Acrylic emulsion on newly plastered wall surfaces over one coat of wall care putty including preparation of surfaces complete all as specified and directed.

M&L one coat of Acrylic emulsion on newly plastered ceiling surfaces over one coat of wall care putty including preparation of surfaces complete all as specified and directed.

M & L for applying two coat of Premium Acrylic Smooth exterior paint (Apex) with one coat of primer including one coat of wall care putty (1.00mm thick) on new plaster wall external surfaces as per manufacturers instruction complete all as specified and directed.

M & L for two coat of Acrylic emulsion (distemper oil emulsion) on old decorated plastered wall over and including one coat of wall care putty(1.00mm thick) with complete removal of existing treatment of internal wall surfaces complete all as specified and directed.

M&L for two coat of Acrylic emulsion on old plastered ceiling surfaces over and including one coat of wall care putty(1.00mm thick) with complete removal of existing treatment of ceiling surface complete all as specified and directed.

M & L for applying two coat of Premium Acrylic Smooth exterior paint (Apex) over and including one coat of wall care putty(1.00mm thick) including one coat of primer with complete removal of existing treatment on external old wall surfaces as per manufacturers instruction complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or fbroken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6, Type C2 using 40mm graded stone aggregate as in filling of post hole complete all as specified and directed.

S&F steel work in tubular trusses, channels, including special shaped washer, plates nuts and bolts, gusset plate, including necessary drilling etc using ERW or induction but welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Flat iron for wind ties, plates (plain or chequered) channels, posts, square cut or notched (ordinary and counter sunk) forming holes etc Fe 410-W (Ged-E-250) quality- A complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, and screewed the other, or screwed both end to be fitted with washer and one hexagonal/square nut not exceeding 5cm long and dia of neck 11 to 15 mm complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed.

M&L for Hardcore of broken bricks gauge n exc. 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thck cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) filling sub base as in floors, paving, sub floor etc finished even and smooth complete all as specified and directed.

M&L 40mm thick cement concrete flooring type B1, 1:2:4 using 20mm graded aggregate finished even and smooth without using extgra cement complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly,complete all as specified and directed.

All as per Srl item No 108 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.

All as per Srl item No 108 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.

All as per Srl item No. 108 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed.

S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S & F switch socket combination 5 pin, type 5/6 Amps flush typecomplete all as specified and directed.

S & F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed.

S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

Supply and fix in replacement industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed.

S & F stepped type, fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed.

S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed.

S&F in replacement of corner security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed.

S&F LED lamp 9W for angle holder complete all as specified and directed.

S & F in replacement of sub-main wiring with PVC insulated and un-sheathed 2 x 2.5 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including PVC "medium quality" conduit as per size required including 1 x 1.5 Sqmm (Nominal area) copper cable as earth contiunity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed. (Note : PVC cable and PVC conduit shall be ISI marked)

S & F in repairs sheet metal enclosure double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 8 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S&F in repairs Sheet metal enclouser double door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directed.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing complete all as specified and directed.

S&F in replacement MCCB TP & N 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed.

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 32 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F MCB ‘C’ series type suitable for 240 volts, AC supply 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

Taking down and depositing of old unsv ceiling fans of any size in MES yard complete all as directed.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Taking down and depositing of old unsv Exhaust fans of any size in MES yard complete all as directed.

Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Fixing only Exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F Heavy duty metal body exahust fan of 300mm sweep ,240 volt,copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to distubed wall in cement mortar (1 :4) and matching with existing colour etc complete all as specified and directed.

Taking down and depositing of Geysers of any size and capacity in MES yard and refixing the same in existing position complete all as specified and directed.

Supply, layying, jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc1.5 mtr depth for laying of cables in soft/loose soil etc complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removal of Excavated material n exceeding 50 mtr and depositing where complete all as specified and directed.

Supply and filling in Sand for Cable protection complete all as specified and directed.

Supply and lay standard size bricks subclass B type complete all as specified and directed.

Supply and laying GI pipe 50 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed by Engr-in-charge.

M&L Hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders all as specified and directed.

M&L PCC 1:3:6 (40mm graded stone aggregate) type C2, in foundation filling and mass concrete complete all as specified and directed .

M&L 50 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base fininshing even and fair complete all as specified and directed .

M&L 100 mm thick cement concrete flooring type B-1, 1:2:4 (20 mm graded stone aggregate) finish even and smooth without using extra Cement as specified and directed by Engr-in-charge

Forming Contraction (Dummy) joints 70mm deep x 10mm wide,filled with sealing compound Grade ‘B’ complete all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’complete all as specified and directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 - W (Gde-E-290 ) complete all as specified and directed.

J and P CONTRACTOR (BID ID -3115888)

M/s Chopdar Builders (BID ID -3109679)

PAREEK AND COMPANY (BID ID -3114659)

KHANNA CONSTRUCTIONS (BID ID -3124863)

M/s RAMESH KUMAR VERMA CONTRACTORS (BID ID -3112840)

Easyways Enterprises (BID ID -3127209)