CONSTRUCTION OF NEW 2X5MVA 33/11KV SUBSTATION JIVNATHPUR (JIWADHIPUR), 33KV LINE AND 11KV FOR JIVNATHPUR (JIWADHIPUR), DIST. CHANDAULI ON SEMI TURNKEY BASIS.

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 2X5MVA 33/11KV SUBSTATION JIVNATHPUR (JIWADHIPUR) DIST. CHANDAULI.

MS channel 100x50x6mm-3000mm long for fabrication of cable stand and neutral earthing stand for power T/F

MS flat 50*6mm for fabrication of cable stand and neutral earthing stand for power T/F

Battery Charger 24 V

Battery set 12 nos.* 2V, 200Ah with stand

Control cable 2x2.5 MM2 (Armored Cable)

Control cable 4x2.5 MM2 (Armored Cable)

Control cable 6x2.5 MM2 (Armored Cable)

Control cable 10x2.5 MM2 (Armored Cable)

Sub station name and arrow shine board complete by providing ms sheet 1220x 1220mmx4mm and ms angle 50x50x5 mm

Clamp and connector for 33 kV switchyard equipments

LT distribution board/panel 440V, 63Amp, 12way type (for testing of T/F VCB etc in switchyard)

Stay insulator for 7/10 swg stay wire, 11 kV procelain type

Fuse set fixing clamp

CT Junction box (for control cable wiring)

PT Junction box (for control cable wiring)

LT PVC Armoured Al. cable 4x16sqmm

Cable Glands of all size (For LT panel, control panel, CT & PT junction box, 11kV panel etc)

Furniture of S/s (04 No chair with 01 No Table)

Fire fighting extinguisher (6kg) of sub station as per ISI specification including mounting on wall with the help of clamp

Fire bucket stand with 04 no. buckets (For switchgear/control room & switchyard)

Break down, shut down, rostering name board 04 No each

Sodium vapor/Murcary LED lamp 250W complete fitting and of standard quality ISI mark with water light fittings, elbow etc. complete in all respect and suitable for above supports for switchyard lighting

11 Kv cable jointing kit 3x300mm2 O/D (Make-Raychem, 3M)

11 Kv cable jointing kit 3x300mm2 I/D (Make-Raychem, 3M)

11 Kv cable jointing kit 3x185mm2 O/D (Make-Raychem, 3M)

11 Kv cable jointing kit 3x185mm2 I/D (Make-Raychem, 3M)

G.I pipe 140mm dia

Rubber matt 2*1.5mtr, 3mm thick as per IS standard

"E" Bracket

Top channel clamp

Dropper angle clamp

Bracing angle clamp

Stay clamp

Earth wire clamp

LT Schakle insulator clamp

Danger board & clamp with nut & bolt

Stone Pad 300x300x75 mm

Cable holding clamp

11 kV TPMO

PG clamp for dog conductor

Spacer LT PVC

Red oxide paint

Allu. Paint

T/F base Clamp

GI Barbed wire

Bolts & Nuts all Size

ERECTION OF CONSTRUCTION OF NEW 2X5MVA 33/11KV SUBSTATION JIVNATHPUR (JIWADHIPUR) DIST. CHANDAULI.

33 Kv pin insulator Polymeric composite

33 Kv line Isolator

33 Kv bus isolator

33 Kv post insulator

33 Kv lightening arrestor

33 Kv PT single phase 33 kv/110volt

5MVA , 33/11 Kv Power T/F

ST Pole 11 mtr long (01 No D/P for S/S T/F, 04 No. D/P for O/G feeder)

PCC 8.5mtr long (08 No S/P for LT line)

90 lbs rail pleces for T/F plinth (44.64 Kg/mtr) (4 No.)

33 Kv VCB with steel structure

33 Kv CT 200/100/1A

ACSR dog conductor

ACSR weasel conductor

63 KVA 11/0.4Kv T/F

Top channel 100x50x6-2240 mm

11 Kv MS channel for dropper 100x50x6-2028 mm

MS bracing angle 65x65x6-2700 mm long

11 Kv MS channel 75x75x6-2028mm with clamp & bolt and nut for T/F base

Stay set

Stay Wire 7/10 SWG

11 kv disc insulator polymeric

11 kv disc fitting

11 kv pin insulator polymeric

MS earthing rod 20x2500 mm and 6 SWG earthing wire etc.

LT Shakle insulator

GI wire 5mm (for pole earthing & LT line earthwire)

T/F Fresh Oil

11 kV fuse set with fixing clamp

Battery Charger 24 V

Battery set 12 nos.* 2V, 200Ah with stand

Control cable 2x2.5 MM2 (Armored Cable)

Control cable 4x2.5 MM2 (Armored Cable)

Control cable 6x2.5 MM2 (Armored Cable)

Control cable 10x2.5 MM2 (Armored Cable)

Sub station name and arrow shine board complete by providing ms sheet 1220x 1220mmx4mm and ms angle 50x50x5 mm

Clamp and connector for 33 kV switchyard equipments

LT distribution board/panel 440V, 63Amp, 12way type (for testing of T/F VCB etc in switchyard)

Stay insulator for 7/10 swg stay wire, 11 kV procelain type

Fuse set fixing clamp

CT Junction box (for control cable wiring)

PT Junction box (for control cable wiring)

LT PVC Armoured Al. cable 4x16sqmm

Cable Glands of all size (For LT panel, control panel, CT & PT junction box, 11kV panel etc)

Furniture of S/s (04 No chair with 01 No Table)

Fire fighting extinguisher (6kg) of sub station as per ISI specification including mounting on wall with the help of clamp

Fire bucket stand with 04 no. buckets (For switchgear/control room & switchyard)

Break down, shut down, rostering name board 04 No each

Sodium vapor/Murcary LED lamp 250W complete fitting and of standard quality ISI mark with water light fittings, elbow etc. complete in all respect and suitable for above supports for switchyard lighting

G.I pipe 140mm dia

Rubber matt 2*1.5mtr, 3mm thick as per IS standard

"E" Bracket

Top channel clamp

Dropper angle clamp

Bracing angle clamp

Stay clamp

Earth wire clamp

LT Schakle insulator clamp

Danger board & clamp with nut & bolt

Stone Pad 300x300x75 mm

Cable holding clamp

11 kV TPMO

PG clamp for dog conductor

Spacer LT PVC

Red oxide paint

Allu. Paint

T/F base Clamp

GI Barbed wire

Bolts & Nuts all Size

Grouting and concreting of 11M ST pole along with plinthing and muffing as per RESPO norms

Grouting and concreting of 8.5M PCC pole along with plinthing and muffing as per RESPO norms

Concreting of Stay rod 20x1800 mm as per RESPO norms

Earthing of S/s outdoor equipments as per RESPO norms Laying of earth mat in the switchyard by laying of MS round of 32 mm dia in 1000mm deep trenches with MS round 32 mm dia, 3 mtr long earth electrodes as per RESPO norms. The work includes welding of the MS round, conneting all steel structures in the switchyard with the earth mat by means of GI strips of size 50x6mm as per item below. (All required materials will be provided by contractor) (A) Excavation of earth for laying mat

(B) Driving of earth electrode (32mm dia, 3 mtr long)

(C) Laying of earth mat (MS) bar including cutting, shaping and binding etc.

(D) Preparation of joints, proper making and welding of main earth mat bar joints and applying bitumen impregnated on joints i.e. end joints, cross joints and lap joints

(E) Welding of riser strip with earth mat and department structure body (One set means one riser strip welding to main equipments.)

Earthing of S/s for indoor equipments as per RESPO norms By way of boring and lowering 'B' class GI pipe 2'' dia, - 3no*20 mtr deep (02 no for both side of switchgear room in delta connection earthing and making earthing pit for each) by providing all materials like 'B' class GI pipe 2'' dia, 50*6mm GI strip, socket, sand, charcoal, bricks, cement etc. (All required materials will be provided by contractor)

Digging & Making of standard size Pakka cable trench by providing cement, sand, bricks & C.C. trench cover for laying of 11 kV 3x300 sqmm XLPE cable from both 5MVA Transformer (All required materials like cements, sands, bricks & C.C. trench cover etc will be provided by contractor)

Laying & dressing of 11 kV, 3*300 sqmm underground cable from 5MVA T/F to 11 kV incoming switchgear in the standard size Pakka trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Digging & making of standard size cable trench by providing sand, bricks & saparate stone slab for each 11 kV 3x185 sqmm XLPE cable (All required materials like sands, bricks & stone slab etc will be provided by contractor)

Laying & dressing of 11 kV,3*185 sqmm underground cable in the trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Plinth & foundation for T/F Construction of plinth of size 4.50*3.50 Mtr for 5 MVA T/F. (All required materials for civil work like sands, bricks, cement, MS bars, stone grits etc. will be provided by contractor)

Plinth & foundation for 33 kV VCB (Construction of plinth of standard size suitable for erection of upper structure for 33 kV VCB including grouting of anchor bolts in proper alignment and level. (All required materials for civil work like sands, bricks, cement, MS bars, stone grits etc. will be provided by contractor)

Digging & Making of Pakka cable trench 450mm wide and 900 mm deep by providing cement, sand, bricks & C.C. trench cover for laying of various size of control cable (All required materials like cements, sands, bricks & C.C. trench cover etc will be provided by contractor)

FABRICATION OF TRANSFORMER SEPARATE EARTHING T/F NEUTRAL EARTHING (A) Seprate earthing of power T/F by way of boring and lowering GI pipe 2'' dia, - 3no*20 mtr deep (02 no for T/F body earthing and 01 no for T/F neutral in delta connection earthing and making earthing pit for each) by providing all materials like GI pipe 2'' dia, 50*6mm GI strip, socket, sand, bricks, cement etc. (All required materials will be provided by contractor)(B) Fabrication and grouting of M.S Channel 100*50*6mm in L- shape with 50*6mm GI strip & in proper size and alignment to provide support for power transformer neutral

Fabrication and erection of cable support made of two pieces of M.S channel 100x50mm,3.0 mtr long joined to each other by means of 5 nos M.S Flat 50x6mm places each by welding at equal intervals and grouting in a block of standard size complete (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x300 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x300 sqmm XLPE cable Indoor jointing kits on switchgears after carefully removing the insulation of the cable, duly plumbing and taping of cable providing,fixing and crimpling of proper size good quality lugs, duly plumbing and taping of cable properly fixing of lugs on switchgears and boxes complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x185 sqmm XLPE cable Indoor jointing kits on switchgears after carefully removing the insulation of the cable, duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs, duly plumbing and taping of cable properly fixing of lugs on switchgears and boxes complete work (All required materials will be provided by contractor)

Hosting of 11 kV,3*185 sqmmXLPE cable with 100 mm Dia, 3.5 mtr long GI Pipe on the outgoing feeder cable before mounting the cable on the double pole, lifting, mounting and clamping of 11 kV feeder cable boxes on the feeder double pole structure and making connection

Hosting of 11 kV 3*185 sqmm XLPE cable to 11 outgoing feeder switchgear, 11/0.4 kV T/F & 11 kV 3*300 sqmm XLPE cable from 33/11 kV T/F to 11 kV Incommer switchgears

Transformer repairing work in case of providing old & used T/F (repairing work of T/F like changing Gasket, changing O ring of T/F busing, stopping oil leakage etc.)

Painting of all structures by red oxide & allumiunium paint (All required materials like red oxide, alluminium paints will be provided by contractor)

Cost for miscelneous works like sandry store, soil filling & leveling, Laying of Bricks in switchyard, T/F cleaning, approach road for switchyard & others

INSTALLATION & CHARGING OF 11kV SWITCHGEARS & CONTROL PANEL IN CONTROLROOM (A) Shifting carefully & safely 11kV I/C, O/G & bus coupler switchgear from outside of the switchgear room as per direction of Engineer in charge (All required materials will be provided by contractor)-8 No.(B) Fixing and making bus bar connections in between all switchgears (All required materials will be provided by contractor)-1 No.((C) Shifting carefully & installation of 33 kV single circuit transformer control panel in control room-02 No.

FABRICATION, ERECTION & GROUTING OF S/s STRUCTURE-01 No., (A) BUS BAR GANTRY & TERMINAL GANTRY: Fabrication, erection, & grouting of Bus bar gantry/ terminal gantry using rail pole and channel as per norms-6No., (B) Fabrication of bus isolator & line structure as per norms06 No., (C) Fabrication of Lightening Arrestor/CT structure/PT structure as per norms-12 No., & (D) Fabrication of Post structure as per norms-12No.

Digging & Making of standard size Pakka trench in switchyard for laying of control cable & power cable (All required materials like cements, sands, bricks & C.C. trench cover etc will be provided by contractor)

Cartage of all other material

Erection charges of Power Transformer

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 33 KV LINE FOR NEW 33/11 KV S/S JIVNATHPUR (JIWADHIPUR) DIST. CHANDAULI. FROM 132 KV JIWADHIPUR, CHANDAULI.

X-Arm clamp for STP/PCC

Top channel clamp

Dropper angle clamp

Bracing angle clamp

Guarding angle clamp with N& B

MS Gaurding angle 65x65x6mm (3.2mtr*28no*5.8/kg=188 kg)

M.s angle 65x65x6mm-3000mm (for support extension bracket)

M.S channel 125x65x6mm-2500mm for extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

33 KV 'E' bracket with N&B

F/T bracket with clamp for PCC/STP

PG clamp for DOG conductor

Danger Board 33 KV with clamp

Number plate

GI Barbed wire

Nut & bolts with washer

Stone pad 300x300x75mm

GI pipe 6'' dia

Stay Clamp

Red oxide paint

Allu. Paint

Cable holding clamp

Earth wire Clamp with N&B

ERECTION OF CONSTRUCTION OF NEW 33 KV LINE FOR NEW 33/11 KV S/S JIVNATHPUR (JIWADHIPUR) DIST. CHANDAULI. FROM 132 KV JIWADHIPUR, CHANDAULI.

ST pole 13mtr long

ST pole 11mtr long

33 KV V type X-Arm 100x50x6 mm, MS channel for STP 11mtr/PCC 9Mtr

ACSR dog conductor

33 KV Disc insulator Polymeric 70 KN

Disc fitting 70 KN

Polymeric 33 KV Pin insulator

33 kV Top channel 125x65x6mm- 3200mm

33 kV Bracing angle 65x65x6mm- 4300mm

33 Kv Stay rod 20x1800mm

Stay wire 7/8 SWG

Dropper channel

Earthing rod 20x2500 mm and 6 SWG earthing wire

GI wire 5mm

GI wire 4mm

X-Arm clamp for STP/PCC

Top channel clamp

Dropper angle clamp

Bracing angle clamp

Guarding angle clamp with N& B

MS Gaurding angle 65x65x6mm (3.2mtr*28no*5.8/kg=188 kg)

M.s angle 65x65x6mm-3000mm (for support extension bracket)

M.S channel 125x65x6mm-2500mm for extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

33 KV 'E' bracket with N&B

F/T bracket with clamp for PCC/STP

PG clamp for DOG conductor

Danger Board 33 KV with clamp

Number plate

GI Barbed wire

Nut & bolts with washer

Stone pad 300x300x75mm

GI pipe 6'' dia

Stay Clamp

Red oxide paint

Allu. Paint

Cable holding clamp

Earth wire Clamp with N&B

Grouting and concreting of 11M ST pole along with plinthing and muffing as per RESPO norms

Grouting and concreting of 13M ST pole along with plinthing and muffing as per RESPO norms

Trimming of tree branches on the way of line

Concreting of Stay rod 20x1800 mm as per RESPO norms

Digging & making of standard size cable trench by providing sand, bricks & saparate stone slab for each 33 kV 3*300 sqmm XLPE cable (All required materials like sands, bricks & stone slab etc will be provided by contractor)

Laying and dressing of 33 kV, 3*300 sqmm XLPE cable in the trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab.(All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Fixing & jointing of 33 kV,3x300 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 33 kV,3x300 sqmm XLPE cable straight through jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Hosting of 33 kV,3*300 sqmm XLPE cable with 6'' Dia, 3.5 mtr long GI Pipe on the double pole cable before mounting the cable on the double pole, lifting, mounting and clamping on the double pole structure and making connection

Cable route marker height*width =40"x10" and thikness=3" "NOMENCLATURE -33kV UNDERGROUND CABLE,DEPTH - ……METER"

Cartage charges of 33kv 3x300sqmm xlpe cable

Cartage charges of all other material

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 11 KV LINE FOR NEW 33/11 KV S/S JIVNATHPUR (JIWADHIPUR), CHANDAULI.

Cross arm clamp

Top channel clamp

Bracing Angle clamp

Guard angle clamp

Stay Clamp

Dropper channel clamp

T-off Clamp

Guarding angle 65x65x6mm

M.S angle 65x65x6mm-3000mm (for support extension bracket)

M.S channel 125x65x6mm-2500mm for extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

11KV 'E' bracket with nut & bolt

11KV 'F/T' bracket

G.I. Barbed wire

Nut, Bolt & Washer

Stone Pad

PG clamp

HDPE pipe 140 mm OD PN-4 PE-80 grade UV stabilized as per IS:4984

GI pipe 100 mm dia

Cable Holding clamp

Danger board & clamp with nut & bolt

Red oxide paint

Allu. Paint

Stay Insulator

ERECTION OF CONSTRUCTION OF NEW 11 KV LINE FOR NEW 33/11 KV S/S JIVNATHPUR (JIWADHIPUR), CHANDAULI.

ST Pole 11 mtr long

ST Pole 13 mtr long

11 Kv 'V' type X-arm

ACSR Weasel conductor

11 Kv disc insulator 45 KN Polymer type

11 Kv disc fitting 45 KN Polymer type

11 Kv pin insulator Polymer type

11 Kv top channel 100x50x6-2240 mm

11 Kv MS iron bracing angle 65x65x6-2700 mm

MS Dropper channel 100*50*6mm-2200 mm

11 kV T-off Channel

11 Kv Stay rod 16x1800 mm as per RESPO norms

Stay wire 7/10 SWG

Earthing rod 20x2500 mm

G.I wire 5mm

G.I wire 4mm

Cross arm clamp

Top channel clamp

Bracing Angle clamp

Guard angle clamp

Stay Clamp

Dropper channel clamp

T-off Clamp

Guarding angle 65x65x6mm

M.S angle 65x65x6mm-3000mm (for support extension bracket)

M.S channel 125x65x6mm-2500mm for extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

11KV 'E' bracket with nut & bolt

11KV 'F/T' bracket

G.I. Barbed wire

Nut, Bolt & Washer

Stone Pad

PG clamp

GI pipe 100 mm dia

Cable Holding clamp

Danger board & clamp with nut & bolt

Red oxide paint

Allu. Paint

Stay Insulator

Grouting and concreting of 11M ST pole along with plinthing and muffing as per RESPO norms

Grouting and concreting of 13M ST pole along with plinthing and muffing as per RESPO norms

Concreting of Stay rod 20x1800 mm as per RESPO norms

Horizontal boring & laying of 140mm dia HDPE pipe below railway track after digging of pit by HDD method

Laying and dressing of underground 11 kV, 3x185 sqmm XLPE cable with double circuit configuration below Railway crossing into 140mm dia HDPE pipe by Horizontal drilling method. The cable loop shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Digging & making of standard size cable trench by providing sand, bricks & saparate stone slab for each 11 kV 3*185 sqmm XLPE cable (All required materials like sands, bricks & stone slab etc will be provided by contractor)

Laying and dressing of 11 kV, 3*185 sqmm XLPE cable in the trench providing fine sand, cushion beneath and fine sand cushion above the cable. The cable shall be duly protected by bricks, sand & saparate stone slab. (All required materials likes sand, bricks & stone slab etc. will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable straight through jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Hosting of 11 kV,3*185 sqmmXLPE cable with 100 mm Dia, 3.5 mtr long GI Pipe on the double pole cable before mounting the cable on the double pole, lifting, mounting and clamping of 11 kV cable boxes on the double pole structure and making connection

Tree branch cutting

Cable route marker height*width =40"x10" and thikness=3" "NOMENCLATURE -11kV UNDERGROUND CABLE,DEPTH - ……METER"

Cartage charges of 11 kv 3x185 Sqmm XLPE cable

Cartage charges of all other material