REPAIR TO ROOF FALSE CEILING FLOORING PLASTERING ETC OF OTM ACCN IN THE AREA OF AGE BR I UNDER GE WEST DELHI CANTT 10

Amount

M&L for 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed including dismantling of asbestos cement any type in roof covering and removing rubbush beyond MOD land complete all as specified and directed .

Dismantling and Refixing of serviceable asbestos cement corrugated or semi corrugated sheets in roofs, wall etc fixed with 'L' type of 'J' type or crancked hook bolts at same or other bldg complete all as specified and directed .

M&L for 6mm thick asbestos cement two piece adjustable serrated ridge suitable for corrugated or semi-corrugated AC sheets fixed with 'L'-type or 'J'-type or cranked hook bolts including dismantling old unserviceable ridge and removing rubbish beyond MOD land complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strerngth of 550Mpa as in roof covering, fixed with self tapping screws including dismantling of old AC sheet roof covering and removing rubbish beyond MOD land complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coated GI based plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof ridge covering, fixed with self tapping screws by providing proper notch/cut in the pattern of corrugated roof sheeting to cover up the gaps of corrugation including dismantling of old AC sheet roof covering and removing rubbish beyond MOD land complete all as specified and directed .

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions including dismantling old false ceiling any type including dismantling of old AC sheet roof covering and removing rubbish beyond MOD land complete all as specified and directed .

S&F 10mm thick printed PVC designer profile false ceiling panel any pattern/colour fixed over and including GI/Aluminim grid(confirm to sample) including all necessary arrangement for fixing ceiling panels such as cleats/hangers/fasteners etc including dismantling of old false ceiling board and removing rubbish beyond MOD land complete all as specified and directed .

Refixing/resecuring of false Ceiling board and snap grid frame work including providing 4mm dia GI wire as in hanger complete all as specified and directed .

S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance not exceeding 30cm centre to centre on vertical and at every end or joint of sheet in horizontal/vertical inclusive of fixing on to wall to make PVC Frame as per specification and drawing including dismantling existing wall penelling/boarding any type complete all as specified and directed .

M&L Non-skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed .

M&L for non skid coloured ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed .

S&F vitrified ceramic coloured tiles 8 -10mm thick light shade double charged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed .

S&F vitrified ceramic coloured tiles 8 -10mm thick Dark shade double charged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed .

M&L for Glazed ceramic coloured tiles in vertical surface, 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in patch work set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/backing in CM 1:4 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed/backing in CM 1:6 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick screed bed/backing in CM 1:4 including dismantling old floor hearth/tiles and removing rubbish beyond MOD land complete all as specified and directed.

M & L Rendering 12-15mm thick in Ready Mix Mortar on brick work or concrete surfaces of wall and finished even and smooth as a whole or in patch work per manufacturer instructions including taking down cement plaster any description from wall surface and removing rubbish beyond MOD land complete all as specified and directed.

M & L Rendering 10mm thick in Ready Mix Mortar on concrete surfaces of Ceiling and finished even and smooth as a whole or in patch work per manufacturer instructions including taking down cement plaster any description from ceiling surface and removing rubbish beyond MOD land complete all as specified and directed.

M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even including taking down cement plaster any description from any surface and removing rubbish beyond MOD land complete all as specified and directed..

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement based paint white or tinted ,complete all as specified and directed .

M&L for Preparation of new rough cast plastered surfaces of wall and applying two coats of cement based paint white or tinted ,complete all as specified and directed .

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying three cots of white lime wash, complete all as specified and directed .

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper including priming the wall surfaces complete all as specified and directed .

M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying three coats of white lime wash, complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish beyond MOD land complete all as specified and directed .

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic(1:1) complete all as specified and directed .

S&F for mild steel work in truss, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 including dismantling old steel work complete all as specified and directed .

M&L for preparation of Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tinted and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed .

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete including demolition of brick work and removal of rubbish beyond MOD land all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) providing, cement concrete in roof kerbs or mud stops/coping, rounded or chamfered on edges including demolition of cement concrete and removing rubbish beyond MOD land complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 35910.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

Usha Contractors and Engineers

Baljeet Builders & Interior Decorators

Vipul Construction

A S CONSTRUCTION CO.

M/S Yamin

imran construction company