Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹33,050
Closing Date
29 Oct 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Akshatha TA Ele and Ws
Repair and replacement of 500 HP capacity 02 motor bearing and 500 HP capacity 01 motor winding and 630 KVA transformer over hauling repair and control switch gear replacement at Rajanahalli pump house
DMA/2024-25/EL/WORK_INDENT30236
DMA/2024-25/EL/WORK_INDENT30236
Reserved
Electrical
Two Tender Document System(Two Cover)
DMA City Corporation Davanagere
6 documents required · 6 mandatory
Satisfactorily completed at least one single work under any Government agency in any one year in the Last Five Financial Year for Value not less than Rs.6.61 Lakh. Work Done certificate should be issued by not less than the Rank of Executive Engineer along with the mention of E procurement Indent Number
Valid Class 1 Electrical contract license issued by electrical inspectorate
Valid reservation Certificate
Annual Turnover Certificate of financial year 2019-20, 2020-21, 2021-22 , 2022-23 and 2023-24 Achieved in at least one financial years minimum annual financial turnover of Rs. 26.44 Lakhs
Annexure-1 Contractor acceptance certificate
VALID LABOUR CERTIFICATE
₹780
₹33,050
20 Oct 2024
20 Oct 2024
31 Oct 2024
28 Oct 2024
RAJANAHALLI PUMP HOUSE 500HP 02 MOTOR
Supply and fixing of new bearing at drive end side (NU 324) SKF Make for 550HP 3.3KV Alstom make HT Vertical motor.
Supply and fixing of new bearing at non drive end side (QJ320) SKF Make for 550HP 3.3KV Alstom make HT Vertical motor.
Reworking of NDE side bearing housing.
Reworking of DE side bearing housing.
Work of overhauling and servicing upto 1250KW, 6.6KV, motor as specified belowcolon a. Disconnect the HT/LT, Cable and record motor details take out the motor from bed b. Check alignment and record de...
Soldering Lead, Flux and brazing and fixing of Bushing rod and refixing of transformer bushings and re connecting conductor
Supply and fixing of HV terminal Bolt with 4 nuts and washers
Supply and fixing of LV terminal Bolt with 4 nuts and washers
Supply and fixing of Top Cover gasket
Supply and fixing of HV/LV rod gaskets for HV and LV
Supply and fixing of MS Bolts and Nuts, washers, spring washers of different size.
Supply and fixing of SRBP Tube
Supply and fixing of LV terminal Bolt with 4 nuts and washers
Supply and fixing of HRC Fuse of 315 Amps, 3.3KV, 40KA
Supply and fixing of HRC Fuse of 160 Amps, 3.3KV, 40KA
Supply , Fixing and Commissioning of Board Approved Branded New FCMA Module 2Pole Vacuum Contactor for VT pump at Rajanahalli Technical SpecificationcolonUe-6.6kv 50Hz. UI-7.2Kv 50Hz Ie-ac4-400Amp...
Supply, installation, wiring, testing and commissioning of Board Approved Branded New FCMA Module Reactor for pump Model NSC1-750-M-3Ka-VT pump at Rajanahalli as per directions of engineer incharge of...
Fabrication and fixing of Out Door Type extended Copper Bus bar arrangement for 630 kva 11/3.3 kv HT tranformer
Supply and fixing of 220V 50Hz 4A, MN0 Dc 22E power contactor as per direction incharge of the work
Supply and fixing of 230V 50Hz 6 to 12A, MX-A1 20E power contactor with realy as per direction incharge of the work
Repiar of soft starter panel 500Hp 3.3Kv FCMA starter CSR 2023-24 Vol 5 Item no 732
Disassemble,testing (both Mechanical and electrical ),removing of old copper,slot cleaning ,conducting hot spot test ,making coils and rewinnding of stater with ,VPI insulation ,re assembling of 500HP...
Supplying of required size copper strips for winding of 500HP, 3.3KV VT motor after deducting burnt out scrap copper
Supplying and applying of semicatherm tape and PGMP tape for 500HP, 3.3KV VT motor
Center, top, slot wedges ,brazing rods rotor dynamic balancing at 2.5 G grade and other required consumables 500HP, 3.3KV VT motor
Transportation of 500HP, 3.3KV VT motor from Rajanahalli pump house to Work shop for repair and work shop to pump house after repair and commissioning work including vibration test etc complete as per...
Supply and fixing of 500/1000 HP 3.3Kv capacity motor terminal Bushings including of resin cast and brass terminal bolts and nuts with allied materials complete as per directions of engineer incharge ...
Overhauling of 110V, 200A battery charger
Overhauling of Out door kiosk of 3.3Kv capacity with allied materials as per directions of engineer incharge of the work
11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymeric Type with ground disconnector
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
31.00 INDENT 30236 RAJANAHALLI 31 LAKHS-ST.doc
Tender Document • 0.18 MB
annexture-1(contractor acceptence letter) Gen Grant.pdf
Others - annexure-1 contractor acceptance letter • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .