ADDN/ ALTN TO ROOF SHEET FLOORING CUM PATH IN BLDG NO P-06 AT HALDI GHATI LINE UNDER AGE B/R-III UNDER GE (S) JAIPUR MIL STN JAIPUR

Amount

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and sheathed cable inclosed in concealed/ pvcconduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings:-

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per item No 1.00 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

All as per Item No 1.00 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and as directed.

S&F switch, piano type 230/250 volts complete all as specified and as directed.

Modular switch 1 way 6A, 1 module

Modular switch 1 way 16A, 1 module

S&F hum free electronic stepped type modular fan regulator on the existing phenolic laminated sheet including connecting up complete.

S & F following modular type, 230/250 Volts grade (ISI marked) items, complete all as specified and directed:-

Modular Socket 6A - 2/3 pin combined 2 module

Modular Socket 6A/16A - 2/3 pin combined 2 module

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Ceiling fan of 1200 mm sweep BEE 5 star rating white color with fan motor blade set, 0.45 meter down rod, canopy complete fitting complete AC 230V complete all as specified and directed.

S&F factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

SP 5 to 32 amps

SPN 40-63 amps

M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit of 25mm bore size medium grade and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. Note : (2x6 sq. mm +1x6 sq. mm earth wire and 01RM of 25mm dia conduit shall be measured as one unit )

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grade " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-1 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and as directed. Note:- PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Excavation in soft/loose soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L Fe- 410-W (Gde-250 Quality-A) Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified and directed.

S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of desired colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in sub base to floor etc complete all as specified and as directed.

M&L for designer vitrified tiles 12mm thick of size 400mm×400mm in floors etc set and jointed in neat cement slurry and pointed in white cement with using pigment to match the colour of tiles complete including 15mm thick screed bed in CM 1:6 / or by approved adhesive complete all as specified and directed. Make - JOHNSON/ KAJARIA / SOMANY

M&L for designer chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments complete all as specified and directed. Make- Mayur Dynamic/ Swastik / NITCO

Stuti Trading Company (BID ID -3091029)

L P Singh and Co. (BID ID -3093589)

Chaudhary Constructions (BID ID -3085428)

PUSHPA G ENTERPRISES (BID ID -3085629)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3093615)

M/S Anil Enterprises (BID ID -3078438)

NAGHAR ENTERPRISES (BID ID -3087186)

MSR INFRATECH (BID ID -3080796)

M/S MAYANK ASSOCIATE (BID ID -3081411)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3077863)