Repair, Painting Work and raising of the Boundary Wall of old Hostel in the campus of Dr. Bhim Rao Ambedkar 10+2 Residential School Dakshini Jehanabad (year 2025-26)

B.O.Q for Repair, Painting Work and raising of the Boundary Wall of old Hostel in the campus of Dr. Bhim Rao Ambedkar 10+2 Residential School Dakshini Jehanabad (year 2025-26)

Estimated Cost Rs.

Earnest Money Rs.

Cost of B.O.Q. Rs.

Date of Tender :

Sl. No. SOR Particulars Qty Unit Rate (Rs.) Amount (Rs.)

1 14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1cement: 4 coarse sand) 1525.072026022305 m2 237.2

2 13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 9802.785780669146 m2 61.1

3 14.66.1 Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 3922.8624535315985 m2 81.7

4 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 1525.072026022305 m2 117.3

5 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 182.15613382899627 m2 1641.5

6 10.12.1 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.Doors 121.22444237918216 m2 3038.9

7 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding 1637.742216542751 kg 144.5

8 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 634.2936802973977 kg 386.1

10 15.23.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and upto 40 mm 317.70446096654274 m2 47.5

11 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: 3.6877604166666664 m3 1411.2

12 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. 25 each 54

13 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering -all work upto plinth level 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 9.855679563492062 m3 3998.1

14 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 317.70446096654274 m2 686.8

15 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thicknes to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete 1313.011152416357 m2 795

16 12.1.3 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 35.687732342007436 m2 1257.3

17 10.16.2 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes 139.31707317073173 kg 137.9

18 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 404.16 m2 83.5

19 13.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New wood work (one more coats 409.85130111524165 m2 83.5

20 13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old steel work (one or more coats) 539.2750929368029 m2 54.1

21 13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old wood work (one more coats) 191.85641263940522 m2 54.1

22 10.38.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with.4.0 mm thick glass panes. 47.04925650557621 m2 876

23 8.2.1.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Rajnagar plain white marble /Udaipur green marble/ Zebra block marble Area of slab over 0.50 sqm 6.691449814126394 m2 2615.3

24 14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. 2610.6412639405203 m2 1.5

25 22.4.1 Providing and Placing in position suitable PVC water stops for construction/ expansion joints between two RCC members and fixed to the reinforfement with binding wire before pouring concrete etc. complete Serrated with central buld (225 mm wide, 8-11 mm thick) 91.46341463414635 m 273.3

26 0L01 Providing Unskilled labour for cleaning and removing unnecessary material 10 each 355.42

27 0L11 Providing Electrician Gr-I 5 each 454.15

28 0L15 Providing Welder Gr I 15 each 537.77

29 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 25 each 4470.9

30 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single of 15 mm C.P. brass pillar taps 5 each 2369.9

31 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia 25 each 104.4

32 18.54.4 Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 90 mm long, weighing not less than 93 gms 50 each 170

33 18.55.1 Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms 25 each 103.1

34 18.56.2 Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms 20 each 194.2

35 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 30 each 190.1

36 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 26 each 1068.5

37 9.165 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm 200 each 103.4

38 9.97.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 250x10 mm 200 each 98.2

39 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm 80 each 210.1

40 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement , trenching , refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.2 20 mm nominal outer dia Pipes 75 m 205.3

18.9.3 25 mm nominal outer dia Pipes 50 m 294.7

41 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter 100 m 257.5

42 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/ accessories for unplasticised -PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.4.2 Single tee without door 110x110x110 mm 40 each 190.7

12.79.5.2 Band 87.50 110 mm bend 40 each 132

43 10.1 Structural steel work in singal section fixed without connecting plate including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete. 3887.1951219512193 kg 88.3

44 12.65X.1 Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling /tapping Stainless steel screws M6, 60 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc.complete as per directions of the Engineer-In Charge. {Cost of truss/ frame work shall be paid separately). 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm 1115.2416356877325 m2 1019.8

45 Carriage of materials

Applying corrcetion factor 0.982 on SOR Items 6052610

Add for 5.36% Additional GST (+) 324420

Executive Engineer

Building Division Jehanabad.