Improvement work on identified black spots on the Pachdevra Karchhana Gauhania link road.

Dense Graded Bituminous Macadam Grading 2 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction As per MoRTH specification clause No. 505

Tack coat Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. As per MoRTH specification clause No. 503

Bituminous Concrete Providing and laying bituminous concrete with 100 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

TRAFFIC SIGNS - STOP (60 cm Octagan as per IRC:67-2012) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 Retro-Reflective sheeting of Clause No. 6.7 make of high intensity and high Intensity Prismatic grade sheeting Class-B and as per MoRTH clause No. 801.3, fixed cover atleast 2 mm thick with aluminium and 4 mm thick with aluminium composite material, confirming to IRC-67-2012 Clause No. 6.6 and Table No. 6.2, supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 90 cm equilaterial triangle. Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. As per MoRTH Clause No. 801.3.11

TRAFFIC SIGNS - Giveway/Rumble Strip/T-Junction/School (90 cm equilaterial triangle. as per IRC:67-2012) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 Retro-Reflective sheeting of Clause No. 6.7 make of high intensity and high Intensity Prismatic grade sheeting Class-B and as per MoRTH clause No. 801.3, fixed cover atleast 2 mm thick with aluminium and 4 mm thick with aluminium composite material, confirming to IRC-67-2012 Clause No. 6.6 and Table No. 6.2, supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 90 cm equilaterial triangle. Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. As per MoRTH Clause No. 801.3.11

Speed Limit Sign at Curve and Other Place Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 Retro-Reflective sheeting of Clause No. 6.7 make of high intensity and high Intensity Prismatic grade sheeting Class-B and as per MoRTH clause No. 801.3, fixed cover atleast 2 mm thick with aluminium and 4 mm thick with aluminium composite material, confirming to IRC-67-2012 Clause No. 6.6 and Table No. 6.2, supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level, 50x60 cm rectengular plate as per approved drawing. Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. As per MoRTH Clause No. 801.3.11

Hazards Sign in front of Parapet Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 Retro-Reflective sheeting of Clause No. 6.7 make of high intensity and high Intensity Prismatic grade sheeting Class-B and as per MoRTH clause No. 801.3, fixed cover atleast 2 mm thick with aluminium and 4 mm thick with aluminium composite material, confirming to IRC-67-2012 Clause No. 6.6 and Table No. 6.2, supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level, 30x90 cm rectengular as per approved drawing. Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. As per MoRTH Clause No. 801.3.11

Lienear Delineation System Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on Rottery and Nosing of divider (as per IRC:67-2012 clause 14.60) Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. As per MoRTH Clause No. 801.3.11

Transverse Bar (Repeated Bars) for Speed Calming (Thermo Plastic Paint) Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 15 mm is excusive of surface applied glass beads as per IRC-35-2015. The finish surface to be leveled uniform and free form streaks and holes. Composition of thermo plastic material shall be as per table 800-9 of clause 803 of MORTH Confirming to Grade-I as per IS:164 and Thermoplastic materials tested in accordence with ASTM D36/BS-3262-(Part-I) including cost of all material labour T&P etc required for proper completion of work as directed by E/I.

Providing and erecting direction, place identification and Facility information sign retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 fixed over aluminium sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. As per MoRTH Clause No. 801.3.11

Reflective Raised Pavment Markers (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer In addition a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who cames out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. RPM (With Shank) As per SOR LKO 2020-21 (Page No. 54 and Item No.- 05)

Chevron Sign at Curve. Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 Retro-Reflective sheeting of Clause No. 6.7 make of high intensity and high Intensity Prismatic grade sheeting Class-B and as per MoRTH clause No. 801.3, fixed cover atleast 2 mm thick with aluminium and 4 mm thick with aluminium composite material, confirming to IRC-67-2012 Clause No. 6.6 and Table No. 6.2, supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 80X60 cm rectangle board. Note: The composite warranty jointly signed by original manufacturer and authorized converter of at least 7 Years shall be furnished on non judicial stamp of required denomination both for rectroreflective sheet and also complete signage. (as per IRC:67-2012 clause 14.60)

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810.