Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.0 L+₹1.3 L (3.65%)Rejected-AOC ROOM NO 220 2ND FLOOR DEVGIRI BUILDING NO 65 B LALLU BHAI COMPOUND MANKHURD MUMBAI 400043 | MUMBAI SUBURBAN | MAHARASHTRA | 400043 | L2 | Rejected-AOC Not Accepted | |
| 3 | L3₹37.3 L+₹2.7 L (7.65%)Rejected-AOC GALA NO 08 D SOUZA SADAN OPP ANULAXMI ART PRINTERS NEAR GANESH MANDIR LOKMANAYA TILAK NAGAR A G LINK ROAD SAKINAKA MUMBAI 400 072 | MUMBAI SUBURBAN | MAHARASHTRA | 400072 | L3 | Rejected-AOC Not Accepted | |
| 4 | L4₹38.9 L+₹4.2 L (12.1%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L4 | Rejected-AOC Not Accepted | |
| 5 | L5₹39.2 L+₹4.6 L (13.1%)Rejected-AOC 32 GRAND SQUARE DANAPUR CANTT PATNA PIN 801503 | PATNA | PATNA | BIHAR | 801503 | L5 | Rejected-AOC Not Accepted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Mumbai
Military Engineer Services Santacruz East, Mumbai 400029 Tel 022-26651061
Certain repairs to roof and other connected works at C-2 and P-2 building at Ghatkopar and Vikhroli under GE North Mumbai
2022_MES_544226_2
8101/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer North Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer North Mumbai
₹80,000
Yes
5 Jan 2023
24 Nov 2022
26 Dec 2022
24 Nov 2022
24 Dec 2022
10 Dec 2022
25 Nov 2022 - 9 Dec 2022
Amount
Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius with old size bricks and built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for 10mm thick rendering with cement mortar 1:6 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge
Material and labour for rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of the brick or concrete surfaces including dubbing out plaster in cement mortar (1:6) of any thickness using water proofing compound @ 3% by the weight of cement or as per manufacturer instructions and finished the surface even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note :WPC will be measured & paid separately as supplied only.
Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit
Material and labour for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 1.5mm thick layer of wall care putty etc complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints
Material and labour for preparation of new plastered wall surfaces and applying two coats of Acrylic weather proof coat 100% exterior grade paint over acrylic primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges all as specified and as directed
Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.
Material and labour for mild steel work such as wind ties for roof including securing bolts, all necessary drilling, bolting, riveting etc confirming to Fe 290 Gde E-165 all as specified and as per directed.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer with necessary scaffolding / shuttering etc complete all as specified and as directed. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
Material and labour for preparing old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux
Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets and removal of rubbish outside of MD land complete all as specified and as directed by Engineer-in-Charge.
Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PVC false ceiling of 10mm thick PVC insulation panel with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/GI/MS as per specification and drawing complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete / cement lime concrete / mud faska (unreinforced in roof and terrace other than ground floor) any description alongwith existing chequered tiles and removal of rubbish to outside MD land etc complete all as specified and as per directed by Engineer-in-Charge.
Material and labour for providing plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregates mixed with water proofing compound at the rate of 2% by weight of cement as in levelling course of roof, laid in slope as required, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately
Material and labour for 10mm thick rendering with cement mortar 1:3 on roof slab/canopies/chajjas with water proofing compound at 3% weight of the cement as per manufacture instructions and make surfaces to receive water proofing treatment finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : Water proofing compound will be measured and paid separately
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide 20mm thick screed in cement mortar 1:4 mixed water proofing compound at the rate of 2% by weight of cement (d) Provide 300 x 300 x 20mm thick machine pressed cement concrete tiles with minimum thickness of joint (not exceeding 3mm) are thoroughly filled with water proof polymer based joint mortar. Note : (i) Water proofing compound will be measured and paid separately (ii) Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.
Material and labour for APP modified waterproofing treatment to parapet wall with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4 lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified. Note : Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.
Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole into brick wall / concrete surfaces (for removing the roots of trees/plants) area not exceeding 0.50sqm each and using acid to burn the all roots of tree/plants and making good disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and including making good adjoining surface with existing finishes all as specified and as directed by Engineer-in-Charge. Note: The unit quoted rate shall be deemed to include WPC & necessary scaffolding as required.
Dismantling of 110/150 mm dia cast iron / PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge
Supply and fix UPVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 150mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix UPVC (SWR) bends of any radius 150mm bore with access door etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick / 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.
Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (not less than 20mm wide) or 20mm dia non metallic rigid PVC conduit (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable switch / socket outlet shall be reused.
One light / Fan / Exhaust fan / bell point controlled by one, one way switch
(b) One 3 pin 5/6 Amps switch socket outlet combination point on independent board.
(c) One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.
All as per item No 32 described here-in-before but for point wiring with 2.5 sqmm single core standard copper conductor and one run of 2.5 sqmm copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.
Material and labour for point wiring with two 1.5 sqmm FRLS grade PVC insulated cable 1100 volts grade as per IS-694 stranded copper conductor cable drawn through and including in PVC conduit concealed complete with all fittings and accessories and 1.5 sq mm stranded copper conductor cable FRLS grade PVC insulated for earth continuity including cutting chases on wall/floor etc. not exc 10 cm girth and making good the disturbed surfaces of wall with cement mortar 1:3 all as specified and directed for one light / Fan/bell/Exhaust fan Point controlled by one switch, one MS pressed 1.6 mm thick terminal box with 3 mm thick hylam sheet ISI marked top cover with brass screws and cup washers for housing switches, socket outlets, fan, regulators etc, all as specified and as directed by Engineer-in-charge.” Note: Serviceable switch / socket outlet shall be reused.
One light / Fan / Exhaust fan / bell point controlled by one, one way switch
One 3 pin 5/6 Amps switch socket outlet combination point on independent board.
One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.
All as per item No 34 described here-in-before but for point wiring with 2.5 sqmm single core standard copper conductor and one run of 2.5 sqmm copper conductor, standard for earth wire for one switch socket outlet point 15/16 amps on the independent board.
Supply and fix in repairs, batten type LED tube light fitting, 1x20 watts, 230 volt, 4 feet with long lasting all pre-wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXACP7UN1W020 or equivalent in Bajaj / CG / Phillips
Supply and fix in repairs surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver of 2 feet 10 watts with necessary electric wiring all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0. 20sqmm complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No LHEXBTP71N1W009 or equivalent in Bajaj / CG / Phillips
Supply and fix in repairs surface/recess mounted LED ceiling light fitting, 600mmx600mm 36w, 230v, 50Hz complete with all accessories internally pre wired and including connecting up with twin core twiated flexible copper conductor cable fixed on the false ceilling with neccessory cutting of false ceilling wherever neccessary screwa/fastners etc complete all as specified and directed by Engineer-in-Charge-in-Charge, Make : Havells Cat Part No BOCR2X2R34WLED857SPCMSSL or equivalent in Bajaj / CG / Phillips
Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Havells
Supply and fix Switch bell push, flush type, single pole, one way, 5/6 Amps, 230 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / L&T
Supply and fix Call bell electric (Ding Dong type) suitable for working on 230 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T
Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten / angular fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix switch socket outlet, combination 5 Pin 5Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix socket outlet, combination 5 in 1, 3 Pin, 5/15Amps, flush type 240 volts, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T
Supply and fix double door, sheet metal enclosure powder coated MCB DB SPN 6 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 43 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Havells Cat part No. DHDQSHODRW06 or Legrand / L&T / ABB / Siemens / Schneider
Supply and fix in repairs MCB SP, 5 to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider
Supply and fix in repairs MCB SPN, 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider
Note: Deduct Credit for demolished / dismantled material of Rs. (-) 1,42,538.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
mp construction co
joshua construction
Vishal Builders
M/S Kumar Enterprises
M/s Qureshi Construction Co
M/s Mohd Altaf Hanif Qureshi
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .