Increasing Capacity of Padari Bazar and Pipiganj Gorakhpur

Amount

Work-01 Padari Bazar Part A (Materials Provided by contractor)

33 KV cable jointing kit 3×300 mm outdoor

11 KV cable jointing kit 3×300 mm outdoor

11 KV cable jointing kit 3×300mm indoor

11 KV cable jointing kit 3×185 mm outdoor

11 KV cable jointing kit 3×185 mm Indoor

Providing and extension of bus bar complete

Armoured Copper Control Cable 2×2.5 mm2

Armoured Copper Control Cable 4×2.5 mm2

24-volt Battery and battery charger (as per supervision authority)

Holding Clamp for 3×300 XLPE 11 KV Cable

GI pipe 6" For hoisting of Cable 3x185/300sqmm

M.S. Nut & Bolt Various size with washer

P.G Clamp for Dog

Rubber Mat

Top Channel 100x50x6 mm, 2400 mm long

Holding Clamp

Complete Stay Set

Disc Fitting for T&C 45 KN

Disc Insulator T&C 45 KN

Polymeric 11KV Pin Insulator

Number Plate with clamp and Nut & Bolt

Danger Plate with clamp and Nut & Bolt

Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp

Red oxide paint

Al. Paint

Barbed Wire

11 KV E Bracket

PART - B- WORK Shifting & loading of following materials on private truck at store centre Gorakhpur & carriage up to 33/11 KV Sub-Station Padri Bazar Distt-Gorakhpur & Un-loading of the same with proper stacking (Distance about 0 to 16km)

33KV Double T/F Control Panel

33 KV VCB 800A, 750 MVA with Steel Structure

33 KV C.T 400/200/1A

Structure of 33 KV CT

Structure of 33 KV LA

33 KV Fuse Set

Structure of 33KV Fuse set

33 KV Bus Isolator

Structure of 33 KV Bus Isolator

33 KV Post Insulator

Structure of 33 KV Post Insulator

90 Ib, Rail pieces (44.64 Kg/M)

ACSR Dog Conductor

33 KV XLPE Cable 3×300 mm2,

11 KV XLPE Cable 3×300 mm2,

11 KV XLPE Cable 3×185 mm2

11 KV VCB 600/300/5A, 350 MVA I/C

11 KV VCB (Out going) 200/100/5A 350 MVA

11 KV Bus Coupler

Fresh T/F Oil

ST Pole 11 M long

All structure (LA structure, CT Structure, BSI Structure, Post Insulator Structure, Fuse set Structure etc

Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement.

Transformer body earthing and Neutral earthing including cost of G.I. strip, G.I. pipe and other earthing materials required. (delta type)

Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement.

Laying of 33 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement.

Providing and rising of cable with GI Pipe 6’’ dia 3mtr long for cable safety.

Providing and erection of Special pipe earthing for cable protection.

Dismentling of Busbar with jumper and all fitting and stringing of ACSR Dog conductor complete work

Providing & grouting of Neutral stand with clamp

Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.

Providing and extension of Gantry busbar complete as per site requirement.

Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.

Jointing charges of 33 KV “XLPE” C/J kit 3 x300 mm2 indoor/outdoor.

Dismantling of existing pale fencing and reseting after completion of transformer work.

Erection & grouting of ST pole 11 m for making D/P to rising of cable with complete work and related fitting.

Providing and Erection of Earthing.

Laying from switchyard to control room for 33 KV panel, CT, VCB,20 MVA T/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand.

Providing and Installation of Outdor Earthing (Eartmat, Delta) as per UPPCL Norms.

Providing and Installation of Indor Earthing as per UPPCL Norms.

Providing and making of cable trench as per site requirement and UPPCL Norms.

Providing and making of SSO Aproach road as per site requirement and UPPCL Norms.

Providing and making of fire wall as per site requirement and UPPCL Norms.

Painting of erected structure in switchyard.

Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.

Installation of Bus Coupler with complete earthing complete work.

Electrical connection of 11 KV switchgear panel and fitting of Bus Bar.

Erection and grouting of following structure.

33 KV Bus Isolator structure

33 KV fuse set structure

33 KV Post insulator structure

33 KV L.A. structure

33 KV CT structure

33 KV VCB structure

Installation of following Equipments on erected structure and related connection

33 KV Bus Isolator

33 KV fuse set (Providing Copper strip as required size for 33 KV fuse set)

33 KV Post insulator

Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection. (complete CR pannel and VCB wiring and Istallation)

Concreting of Stay

Safely T/F Oil filling as per site required.

Work-02 Pipiganj Part A (Materials Provided by contractor)

33 KV cable jointing kit 3×300 mm outdoor

11 KV cable jointing kit 3×300 mm outdoor

11 KV cable jointing kit 3×300mm indoor

Copper Control Cable 2x2.5 sq.mm

Copper Control Cable 4x2.5 sq.mm

GI pipe 6" dia for 3x300/185 sqmm XLPE cable

Holding Clamp for 3×300 XLPE 11 KV Cable

24 Volt Battery and Battery charger with cabinet (as per supervision authority)

Structure For cable support & “L" Type Structure for Neutral

Stand for cable rise with clamp

M.S. Nut Bolt of various size with washer

P.G Clamp Dog to Dog

PART - B- WORK Shifting & loading of following materials on private truck at store centre Gorakhpur & carriage up to 33/11 KV Sub-Station Pipiganj, Distt- Gorakhpur & Un-loading of the same with proper stacking (Distance about 0 to 28 km)

3×300 mm2, 11 KV XLPE Cable

3×300 mm2, 33 KV XLPE Cable

33KV Bus Isolator

33KV CT 400/200/1A

Structure of 33KV CT

Structure of LA

33KV Fuse Set

Structure of Fuse set

33 KV VCB 800A,750MVA with steel structure

Control Panel I/C for 33KV Double T/F

90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr. @ Rs. 22.10 Per Kg.

ACSR Dog Conductor

Repairing/Construction of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection, Rail pieces and increasing height of T/F plinth as per site requirement.

Transformer body and neutral earthing including cost of G.I. strip, G.I. pipe and other earthing materials required. (delta type)

Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.

Temporary cable laying during construction of plinth and installtion of new 10 MVA T/F. (30M) and receive back to store centre Gorakhpur.

Dismantling of old Transformer from plinth and kept aside in switchyard

Charges for jointing of 11 KV C/J kit

Charges for jointing of 33 KV C/J kit

Dismantling of existing structure and re-erection according safety requirement

Erection and grouting of following structure.

33 KV fuse set structure

33 KV L.A. structure

33 KV CT structure

33 KV VCB structure

Installation of following Equipments on erected structure and related connection

33 KV Bus Isolator

33 KV fuse set (Providing Copper strip as required size for 33 KV fuse set)

33 KV VCB

Hiring of D/G Set 63 KVA 3 Phase for Testing of T/F by contractor.

Dismentling of Busbar with jumper and all fitting and stringing of ACSR Dog conductor complete work.

Providing and erection of cable stand and neutral stand complete.

Providing and rising of GI pipe 50 mm dia (3 Mtr long) over the 3x300/185 sqmm XLPE cable

Dismantling of existing pale fencing and resetting after completion of trnasformer work.

Installation of 33 KV control panel, wiring with complete earthing and respectively installation of battery and battery charger in control room and making connection.

Wiring and complete connection of 33 KV VCB with earthing.

Laying from switchyard to control room for 33 KV panel, CT and 10 MVA T/F by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete.

Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coats of good quality of high class luxol aluminium paint)

M/s VIRENDRA KISHOR PANDEY (BID ID -5523448)

D.V ENTERPRISES (BID ID -5536294)

M/s Apurv Enterprises (BID ID -5536283)