Special repairs to toilets and bathrooms of OTM Accn Bldg No. P-203 and P-193 at new Mil Stn Kapurthala under GE Kapurthala.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for glazed ceramic colour tiles of size 420mmx300mm x 7mm thick as per approved pattern on vertical surfaces such as in skirting, dado etc over and including 15 mm thick backing coat in CM 1:4 incl set and jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.

Taking down cement plasteron brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately

M&L for 5mm thick cement plastering in cement mortar (1:3) on fair faces of brick work or concrete surfaces of ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material & labour for preparation of new plastered surface of walls and applying two coats of oil bound distemper over and incl a coat of primer complete all as specified and directed.

M&L for applying two coats of cement base paint on newly plastered or unplastered surfaces including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint on old plastered or unplatered surfaces including preparation of surfaces complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

Material & labour for 75mm thick PCC (1:3:6) type C-1 ( using 20mm graded stone aggregate) as in plinth protections and path etc finishing the concrete surfaces even and smooth without using extra cement & joint filled with bitumen sand mixer complete all as specified and directed.

Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area not exc 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area exc 1.5 Sqm but n. exc 4 sqm each for doors and windows complete all as specified and directed.

S&F PVC solid door frame of size 50mmx47mm with a wall thickness of 5mm made out of extruded 5mm thick rigid PVC foam sheet, mitre cut at two corners and joined with two Nos of 150mm long brackets of 15mmx15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket, and weather seal to be provided through out the frame. The doorframe shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. A minimum of four Nos of screws to be provided for each vertical member and minimum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing complete al as specified and directed.

Supply & fix factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, but fitted with stainless steel wire guaze panel stretched firmly at edges, wrapped on an additional square 8 mm M S tube all as specified in SSR part II complete all as per specified and as directed by the Engineer in Charge.

Supply & fix pressed steel frames, size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc including tarring ends and back of chowkhats and lugs including back filling of PCC 1:3:6 for chowkhats complete all as specified and directed.

Supply and fix 35mm thick 2nd class hardwood factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fix aluminium hinges of size 100mm shutter complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt is 200mm complete all as specified and directed by Engineer-in-charge.

Supply & fix extruded aluminium alloy handles, fabricated type, anodised, 150mm size, all as specified and directed.

Supply & fix 250 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 12 mm dia with hasp, staple (bolt type) and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, grills & painting shall be measured & paid for separately and irrespective of whatever shown on drgs, MS grills shall be of 12 mm dia MS square bar.

All as per srl item No. 27 here in before but of gauged shutter. Note for item No. 27 & 28 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

M&L for framed work such as grills/gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work conforming to Fe-290, Gde E-165 all as specified and directed.

Supply and fix steel window or ventilators, fixed type with glazing bars complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality, pinhead type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick figured glass ordinary quality pinhead type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless in repair steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-charge.

Supply & fix in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Taking up or down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

Taking up or down GI tubing & connection 25 mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S&F GI tubing 25 mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore CP bib taps cast copper alloy with crutch or butter fly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia stop valve chromium plated, cast copper alloy with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe or for union complete all as directed by Engineer-in-charge.

Supply & fix in repairs squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including PVC low level flushing cistern of 10 litre capacity with brackets to flush tank, PVC flush pipe etc making good to match with existing surfaces complete all as specified and directed.

S&F brass chromium plated towel rail 20mm dia D type, 600mm long between flanges including CP brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified.

Supply & fix in repair PVC (SWR) 75mm bore floor trap plain with grating including jointing with waste pipe with solvent cement complete all as specified and directed.

Supply & fix in repairs stop valve fancy type chromium plated (concealed) type with long shank & cup 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix wash hand basin vitreous china white, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste coupling, waste fittings and PVC waste pipe 32 mm bore, including pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,connection to water tubing, PVC connection 15mm dia with brass check nuts complete all as specified and directed..

Supply & fix in repairs shower rose brass chromium plated of size 100mm with or without swivel joints including CP arm of chromium plated any colour and fixing to steel pipe or union of 15mm bore complete all as specified and directed.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engineer-in-charge.

Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge.

Material & labour for 10mm thick cement plaster in cement mortar (1:3) on brick or concrete surfaces with water proofing compound and finishing the surface even and smooth with using water proofing compoud complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Material & labour for applying Atactic Poly propylene modified polymeric membrane with non woven polyster reinforcement 3 mm thick superior multi polymeric of weight not less than 3.0 Kg per sqm with properties of high penetration and the centre core consisting of 90 micron high Molecular-High Density polyethylene (HMHDPE) film consisting of five layers as per manufacturer’s specifications. The superior multi polyplus is to be laid after preparing the surfaces by cleaning thoroughly to achieve a smooth surface over and including a coat of bitumen primer @ 0.40 Litre per sqm and a coat of hot applied blown bitumen of grade 85/25 @ 1.2 kg per sqm. The overlaps between super multi polyplus are minimum 10cm seam in width/length wise, membrane laid with torching application to the surface complete all as specified and all as per manufacturer’s directions.

Material & labour for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete or sub base in floors etc complete all as specified and directed.

Material & labour for 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished rough to receive top floor layer/tiles complete all as specified & directed.

M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:6 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement complete all as specified and directed by Engineer-in-charge.

All as per item no 55 above but except brick tiles complete all as specified and directed by Engineer-in-charge.

Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

Supply and fix in repairs, vitreous china urinal, flat back or corner wall type of size 465x355x265mm white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste including flush pipe, grating and Union for discharge pipe complete all as specified and directed.

Supply and fix urinal spreader of PTMT of any colour for fixing with 15 mm dia pipe including PVC connection of length 450mm complete all as specified & directed.

Dismantling of cast iron pipe of any diameter jointed in cement mortar or lead including all fittings complete all as specified and directed.

Supply & fix in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

Supply & fix in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor including necessary cutting chasing etc. complete all as specified and directed.

Supply & fix PVC (SWR) 75 mm bore bends any radius complete all as specified and directed.

Supply & fix PVC (SWR) 75mm junction single (Single 'T') equal or unequal complete all as specified and directed.

Supply & fix PVC (SWR) 75mm junction double (double 'T') equal or unequal complete all as specified and directed.

Add to item Nos. 63, 64 & 65 if provided with access door complete all as specified and directed.

Supply & fix in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

Supply & fix PVC (SWR) 110 mm bore bends any radius complete all as specified and directed.

Supply & fix PVC (SWR) 110mm junction single (Single 'T') equal or unequal complete all as specified and directed.

Supply & fix PVC (SWR) 110mm junction double (double 'T') equal or unequal complete all as specified and directed.

Add to item Nos. 68, 69 & 70 if provided with access door complete all as specified and directed.

Supply and fix 110mm PVC (SWR) vent cowl complete all as specified and directed.

Dismantlig of PVC water tank of capacity 2000 litres and removing from site complete all as specified and directed by Engineer-in-charge.

Demolition of reinforced cement concrete water tanks of any size complete all as specified and as directed.

Supply & fix rotational moulded polythene water storage tank triple layer, ISI Marked of capacity 2000 litre cylindrical vertical with closed top hoisted in position including all fittings complete all as specified and directed.

Supply & fix in repair 20mm dia gun metal gate and globe valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply & fix in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete screwed for 20 mm bore dia of iron pipe or brass ferrule complete all as specified (Minimum weight 210 grams) complete all as specified and directed.

Supply and fix 72mm PVC (SWR) vent cowl complete all as specified and directed.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point controlled by one way switch complete all as specified and directed.

All as per description of srl item No 79 here in before but using 4 sqmm (nominal area) PVC unsheathed cable independent including PVC cable copper conductor with 4 Sqmm PVC insulated copper cable for continuous earth continuity conductor and connecting for earth dolly for 5 pin socket out let 15 Amps on independent board. complete all as specified and directed

S&F switch piano flush type 5 amp single pole one way complete all as specified and directed.

S&F switch piano flush type 15 amps single pole one way complete all as specified and directed.

Supply and fix socket out let multi purpose 2 in one, 3 pin, 15 amps flush type complete all as specified.

Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Taking down old u/s fluorescent tube light fitting and Supply, installation testing and commissioning of 20 watt 4 ft long LED batten housing made of self ballasted LED batten extruded aluminium body with PC diffuser integral isolated driver , beam angle > 120 degree wide light distribution and lumen output should be at least 1800 lumen with a CCT of 6500K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. complete all as specified and directed. Make:Polycab Intenso AX Cat Part No LD00103023 or equivalent makes as mentioned in grp 1 of Appx 'B'

Supply and fix lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

Taking down old unserviceable MCBs and supply and fixing MCB 6 to 32 amps, SP 240 volts, complete all as specified and directed.

Taking down unserviceable MCBs and supply and fixing MCB 6 to 32 amps, SPN 240 volts, complete all as specified and directed.

Taking down old unserviceable sub main wiring 4.00/6.00 Sqmm 1100 volts grade 2/3 runs of single core PVC insulated, unsheathed copper conductor including taking down casing/caping/PVC conduit and making good the surface complete all as specified and directed.

Supply and fixing sub main wiring with two single core PVC insulated cable with copper conductor stranded and sheathed of size 6 sqmm, two runs in and including PVC concealed conduct medium grade of size not less than 25mm dia including PVC accessories complete incl cutting and chasing and making good etc incl one run of 6 sqmm PVC insulated unsheathed multi stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed. Note : Two run of 6 sqmm cable & one run of 6 sqmm including PVC conduit 25mm will be measured as one unit.

Taking down old unsv DB and S&F factory made sheet metal enclosure double door distribution board class IP-43 with 200 amp rated copper bus bar 240 V, 4 way single pole and neutral link complete all as specified and directed.

KAMAL AGGARWAL

COSMO BUILDERS