Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC | L1 | Accepted-AOC Lowest tender | |
| 2 | L2₹22.2 L+₹24,800 (1.13%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹24.4 L+₹2.5 L (11.3%)Rejected-Finance | L3 | Rejected-Finance Not being lowest tender | |
| 4 | L4₹25.0 L+₹3.0 L (13.6%)Rejected-Finance | L4 | Rejected-Finance Not being lowest tender | |
| 5 | L5₹25.0 L+₹3.0 L (13.7%)Rejected-Finance | L5 | Rejected-Finance Not being lowest tender |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) ADM AREA
GE (AF) ADM AREA GWALIOR-474020
REPAIR/REPLACEMENT OF FOOTPATH/KERBS/DRAIN AND CERTAIN OTHER MISC WORKS IN ADM AREA UNDER GE (AF) ADM AREA AT AF STATION GWALIOR
2024_MES_639625_1
8384/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) ADM AREA GWALIOR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) ADM AREA
₹90,000
Yes
30 Mar 2024
30 Jan 2024
7 Mar 2024
30 Jan 2024
27 Feb 2024
20 Feb 2024
Amount
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.
Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified.
M&L PCC 1:2:4 type B-1using 20 mm graded stone aggregate in benching of surface channel as in drains and finishing complete all as specified and directed by Engineer-in-Charge.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (inner girth only measured) complete all as specified and directed.
Add or deduct for each 25 mm girth or part thereof over or under 30 cm.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping,kersbs, mud stops rounded or chamfered in edges etc, finish even & fair without using extra cement, including necessary formwork as per site requirement complete all as specified and directed
M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in drain beds etc complete all as specified.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection complete all as specified.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc,complete.
All as per Item No 10.00 here-in-before except brick built in CM (1:4)
M&L for Rendering 10 mm thick on new prepared brick work or concrete surface on wall in cement mortar 1:4 finished and mixed with Water proofing compound @ 200ml per 50kg of cement or as per manufacturer instructions and finished even and smooth without using extra cement and WPC Complete all as specified. Note: WPC shall be measured and paid as supply only
Supply only water proofing compound
M&L Preparation of new plaster on brick wall surfaces and applying two coat of cement base paint over a coat of primer of same make on walls complete all as specified and directed
Taking down cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as specified.
M&L for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished fair & even without using extra cement complete al as specified.
M & L for preparation of newly plastered surface of wall and and two coats of whitewash on walls complete all as specified and directed.
M& L for preparation of old brick wall surfaces and flush pointing to brickwalls with CM (1:4) etc complete all as specified and directed
M&L for preparation of pointed surface of brickwalls /plastered surface & applying two coats of exterior emulsion with one coat of primer complete all as specified and directed.
Demolition of Stone slabs of any description or thickness in floors / kitchen/roof platforms etc., complete all as specified and as directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in the flooring rough finshed to receive the floor finish
M&L for chequred tiles of approved design,colour & of ( size 300mmx300mmx25mm) set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed
M&L for endura tiles 300x300 x 6-7mm thick coloured set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over screed bed 10 mm thick in CM 1:6 on floors complete all as specified and directed.
S&F 50 mm thick Pre cast cement concrete jallies type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4 including all mouldings, chamfers, weathering, throating etc including demolition of old complete all as specified and directed.
Demolition of RCC work of any description and in any position etc all as specified.
M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for precast cover slabs Factory made type B-1 1:2:4 (using 20mm mm graded stone aggregate) like for manhole/ drains etc inclluding TMT Bars as per site requirement complete all as specified and directed by Engineer-in-Charge.
M&L for Formwork to faces of wall,parapet, coping,lintel,landing, to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter not specified complete all as specified and directed.
M&L TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L TMT bars10 mm and above dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
All as per sl item No. 31.00 here-in-before but embedded on natural ground.
Dismantling fencing wire mesh,any type,complete all as specified and directed.
S&F,mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and directed
Supply only galvanised chain link fencing of size 50 x 50mm aperture and dia of wire 4.00mm any size or type as approved by Engr-in -charge etc, complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed
Dismantling boarding of any type and size complete all as specified and directed.
S& F 5-6 mm thick composite panel fixed to framed work and the joints of all panels around the frame shall be made seamless from all sides with the use of silicon or as per manufacturers instructions complete all as specified and directed.
M&L for writing letters on ACP fabricate out of stainless steel sheet not less than 0.90mm thick and not less than 4 CM in width.The overall height and width of letters shall not be less than 30 CM and shall be installed/Fixed on ACP as per manufacturers instructions complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provideed for complete all as specified and directed.
S&F framed work as in door or gates of angle or other section Fe-410 W (Gde E-250) with gusset plates , rails braces etc complete drilled for fixing of steel sheeting or other covering complete all as spd and directed.
M&L for 0.5-1.0 mm thick plain PVC Sheet fixed in doors,Gate with coach screw and PVC washers (length and girth as fixed)etc complete all as specified.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete, all as specified & as directed.
M&L for washing down,rubbing, cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint, complete, all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including washing down,rubbing down, cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint, complete, all as specified & as directed.
M&L for complete removal of existing treatment and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance ,Alkal and fungal resistance,dirt resistance exterior paint with silicon additives and including primer Complete all as specified and as directed. Note : Colour will be decided by Engr- in-Charge.
M&L for obliterating old writing of any description not exc 0.1 sqm with paint to match existing works complete all as specified and directed
M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman ,Italioan or indian letters including stops,commas,arrows,brackets,dashes etc on sign board (Black or yellow) including two caots of oil paint over caot of white based synthetic enamel paint complete all as specified and directed
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of old steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed
M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified and directed
M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified.
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled properly and broomed etc complete all as specified and directed.
M/S Amit Traders
Kumar Sales Corporation
GWALIOR TRADE LINK
M/s Jai Durga Construction
Ganga and Sons
KISHAN CONSTRUCTION COMPANY
M/S NIRMAL SINGH DHANJAL
m/s vikash Engineers
M/S YOGANSH CONSTRUCTION CO.
USHA TRADERS
M/S LAKSHYA CONSTRUCTIONS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .