Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC N S T COLONY CIRCULAR ROAD HOUSE NO 04 DMC DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹56.8 L+₹5.7 L (11.2%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹58.4 L+₹7.3 L (14.3%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹58.7 L+₹7.6 L (14.8%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹59.3 L+₹8.2 L (16.1%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-Finance Higher bid value |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
15 Jun 2021, 6:00 pmClosed
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR /MAINT OF INTERNAL WIRING AND ALLIED WORKS AT ALL MD ACCN AT RMS AND REPAIR/ MAINT OF INTERNAL SWITCH GEARS, SUB MAIN WIRING, SERVICE CONNECTIONS, EARTHING AND BLDG SECURITY LIGHTS AT RMS UNDER AGE E/M OF GE 868 EWS
2021_MES_445869_1
8358/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
GE 868 EWS
₹96,000
Yes
28 Sept 2022
26 May 2021
17 Jun 2021
26 May 2021
15 Jun 2021
9 Jun 2021
26 May 2021 - 27 May 2021
Amount
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. Make: Richa/KEI/Finolex/Polyacab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa
(a) One light/Ceiling fan/Exhaust fan controlled by one, one way switch.
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
(d) One bell point controlled by one, one way switch .
All as per item No- 2 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Make: Richa/KEI/Finolex/Polyacab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa.
M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make:-Anchor/Legrand/Kinjal
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type Make:-Anchor/Legrand/Kinjal
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type Make:-Anchor/Legrand/Kinjal
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type Make:-Anchor/Legrand/Kinjal
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc. Make:-Anchor/Legrand/Kinjal
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make:-Anchor/Legrand/Kinjal
M&L for replacement of Bell AC 230 volts musical type complete all as specified and directed. Make:-Anchor/Legrand/Kinjal
M&L for bell push switch 5 amps piano type flush type complete all as specified and as directed Make:-Anchor/Legrand/Philips
Repair/Replacement for Modular Switch 1 way 6A,1 module Make:-Anchor/Legrand/Philips
Repair/Replacement for modular switch 1 way 16A, 1 module Make:-Anchor/Legrand/Philips
Repair/Replacement for Modular Socket ,6A/2/3 pin combined 2 moduleMake:-Anchor/Legrand/Philips
Repair/Replacement Modular Socket ,6A/16A-2/3 pin combined 2 module Make:-Anchor/Legrand/Philips
Repair/Replacement Modular Bell push 1 Way 6A 1 module Make:-Anchor/Legrand/Philips
Repair/Replacement Modular stepped type electronic fan regulator 120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:-Anchor/Legrand/Philips
Repair/Replacement for Lamp holder(Penta, Batten,Angle Type) PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Repair/Replacement for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make:-Anchor/Legrand/Kinjal
Repair/Replacement for Socket outlet, 2 in 1, 5 pin 5A flush type Make:-Anchor/Legrand/Kinjal
Repair/Replacement for Switch Socket combination, 2 in 1, 5 pin 6A flush type Make:-Anchor/Legrand/Kinjal
Repair/Replacement for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type Make:-Anchor/Legrand/Kinjal
Repair/ReplacementL for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc. Make:-Anchor/Legrand/Kinjal
M&L for 20W LED 4"tube Rod for Crystal glass LED tube light Double side connection suitable batten light fitting complete all as specified and directed Make :Bajaj/CG/Philips/Wipro/Havells
M&L for 20W LED 4"tube Rod for Single side connection suitable batten light fitting complete all as specified and directed Make :Bajaj/CG/Philips/Wipro/Havells
M&L for 09 watt LED 2', wall mounted with polycarbonate housing/batten. Make :Bajaj/CG/Philips/Wipro/Havells
M&L for LED 1x20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed Make :Bajaj/CG/Philips/Wipro/Havells
M&L in replacement for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and directed. Make :Bajaj/CG/Philips/Wipro/Havells
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make : Anchor/Legrand/Kinjal Make LED lamp :Bajaj/CG/Philips/Wiprol
Taking down existing burnt aluminium/copper sub-main wiring with PVC insulated & unsheathed two run of 2.5 Sqmm single core multi stranded copper copnductor cable (FRLSH) 1100 Volt grade along with one run of 2.5 Sqmm PVC insulated & Unsheathed copper conductor cable (FRLSH) 1100 Volt grade connected to common earth dolly as earth continuty conductor, drawn through 20 mm dia PVC Casing Caping after and inclduing taking down existing submain wiring complete all as specified and as directed Note:- Four runs of 2.5 Sqmm cable one run 2.5Sqmm Make : Finolex/Havells/RR Kabel.Make of caping/casing & PVC boxes : Prestoplast/finolex/Supreme
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens
All as per item No 31.00 above but SPN 4 Way Make:- Legrand Cat No 507610 or equivalent in ABB/Siemens
All as per item No 31.00 above but SPN 2 Way Make:-Legrand/ABB/Siemens
M&L for MCB RCCB SPN 25 Amps 240 Volt for Integrated label holder Ergonomic Grey colour dolly siliding bottom clamp colour coded ON/Off indication on dolly Biconnect lower terminals IP 20 protected terminals 35 Sqmm terminals sliliding shutters suitable for fixing in MCB DB 'C' series incl unsv taking down complete all specified and as directed. Make:Legrand Cat No 411851 or equivalent in ABB/Siemens.
M&L for MCB RCCB TPN 63 Amps 415 Volt for four pole Integrated label holder Ergonomic Grey colour dolly siliding bottom clamp colour coded ON/Off indication on dolly Biconnect lower terminals IP 20 protected terminals 35 Sqmm terminals sliliding shutters suitable for fixing in MCB DB 'C' series incl unsv taking down complete all specified and as directed. Make:Legrand Cat No 411878 or equivalent in ABB/Siemens.
M&L for MCB TPN 40 Amps 415 Volt 50 Hz suitable for fixing in MCB DB 'C' series, incl unsv taking down complete all specified and as directed. Make:Legrand Cat No 408681 or equivalent in ABB/Siemens.
All as per item No 36.00 for MCB TPN 63 Amps 415 Volt 50 Hzincl unsv taking down complete all as specified and directed.Make:Legrand Cat No 408683 or equivalent in ABB/Siemens.
All as per item No 36.00 for MCB TPN 100 Amps 415 Volt 50 Hzincl unsv taking down complete all as specified and directed. Make:Legrand Cat No 408704 or equivalent in ABB/Siemens.
All as per item No 36.00 for MCB 32 Amps SPN 240 Volt 'C' series,incl unsv taking down complete all as specified and directed. Make:Legrand Cat No 408617 or equivalent in ABB/Siemens.
All as per item No 36.00 for MCB 63 Amps SPN 240 Volt 'C' series,incl unsv taking down complete all as specified and directed.. Make:Legrand Cat No 408620 or equivalent in ABB/Siemens.
All as per item No 36.00 for MCB 6 to 32 Amps SP 240 Volt 'C' series,incl unsv taking down complete all as specified and directed. .Make:Legrand Cat No 408587 to 95 or equivalent in ABB/Siemens.
M&L for MCCB 100 Amps 4 pole 16 KA incl unsv taking down complete all as specified and directed. Make : Legrand cat No 420015 or equivalent to ABB/Siemens
M&L for MCCB 125 Amps 4 pole 16 KA incl unsv taking down complete all as specified and directed.. Make : Legrand cat No 420016 or equivalent to ABB/Siemens
M&L for MCCB FP, 415 Volts adjustable type, 160 Amps 4 pole with breaking capacity 36 KA suitable for fixing in MCB DB incl unsv taking down complete all as specified and directed. Make : Legrand cat No 420097 or equivalent in ABB/Siemens.
All as per item No 44.00 above MCCB FP, 415 Volts adjustable type, 125 Amps 4 pole with breaking capacity 36 KA suitable for fixing in MCB DB incl unsv taking down complete all as specified and directed. Make : Legrand cat No 420096 or equivalent in ABB/Siemens.
M&L for MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.Make:- Legrand Cat No or equivalent in ABB/Siemens
M&L for MCB Distribution board double door type TPN 6 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.Make:- Legrand Cat No or equivalent in ABB/Siemens
S&F 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hanger not more than 1 meter apart including 4 mm suspension wire one twine core cable flat or circular stranded conductor of size 4 Sqmm incl taking down complete all as specified and directed. Make : Richa/RR Kabel/Finolex
All as per item No 48.00 above but 6 Sqmm twine core cable.
All as per item No 48.00 above but 10 Sqmm twine core cable.
All as per item No 48.00 above but 16 Sqmm twine core cable.
M&L for LED 1x20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down complete all as specified and directed Make :Bajaj/CG/Philips/Wipro/Havells
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 with 10mm thick CI cover plate hinged to angle iron frame of suitable size, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
Rameshwar Prasad
commercial enterprises
NAGALAND AGENCIES CO
Shri Atoshe Tuccu
das enterprises
SHRI MADAN SINGH
P K ELECTRICAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .