Furnishing work in computer...

Amount

The worktop shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop. Modesty shall be made of 1.2mm thick CRCA with 450mm height. The height of the modesty shall be 450mm. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & worksurface. Wire Management: The Raceways shall provided below the work surface for carrying wires from one end to other end of the cluster, Size offered shall be 125mm Ht, Thickness 50mm. With vertical wire entry cover & 65mm dia grommet hole for wire access. The raceway shall be made of 0.8mm CRCA with duly powder coated. The front fabric screen shall be provided of size 750 mm L x 350 mm ht. made up of 18 mm thick prelam particle board of grade E1 upholstered by fabric, having aluminum extrusion at all three sides having cross section size of 12mm x 5mm & joined at all 4 corners with Zinc mazak5 die cast connector of size 15 L x 15 H x 12mm W. The OEM shall have ISO 9001 (NABCB Accredited agency), ISO 14001 (NABCB Accredited agency), BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Make:- Godrej/Featherlite/ Haworth/ Steelcase complete in all respects with the prior approval of Engineering in charge.

The overall size of Chair shall be height 870 to 970 +/-5 mm, Back Width 415 mm at Top and 470mm at bottom, and 450mm at the lumber support. Seat Width 480 +/-5 mm, Seat Depth 440+/-5 mm and Seat height 420mm to 520 mm +/-5mm range. over all chair width should be 540 +/-5mm and Overall chair depth should be 610 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The back frame shall be made up of PPGF and the injection molded in grey color, armrest also in grey color. The chair shall be supplied with Mesh Back rest. The Chair should be provided with center tilt two position lock Mechanism.The mecahinsm plate shall be attached to seat with 2.5mm thick plate. The mechanism shall allow 360 degree revolving feature along with height adjustablility. Fixed arms connected to seat and back in the same contour.Armrest shall be Single peice die casted trapezium shaped arm rest overall size of 280 L x 230 H x 11mm thick at user side. The mechansim shall possess seat to back recline ratio of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal Base in grey color to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be made up of mild steel powder coated in grey shade to match the entire grey theme of chair.Metal base powder coated made up of sheet thickness 2mm.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.The OEM shall have ISO 9001 (NABCB Accredited agency), ISO 14001 (NABCB Accredited agency), BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification, India Design Mark. Make: Godrej/Featherlite/ Haworth/ Steelcase complete in all respects with the prior approval of Engineering in charge.

SABISH INTERIO (BID ID -1320684)