Prov.WSS to Khwangi ,Basti Below udhyog kendra and Sharbo in GP Khwangi Tehsil Kalpa Distt.Kinnaur H.P.

Amount

Excavation in foundations in all kinds of soil such as pick work ,jumper work, blasting hard or soft rock chiseling where blasting is prohibited or saturated soil , lift upto 1.50 mtr stacking the excavated soil not more than 3.00 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers when required into plinth sides of foundation consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with a lead of 20 mtrs. P/J Work.

Cutting in earth work and disposal of excavated earth upto lead of 20 mtrs in Pick and Jumper work.

Providing and laying cement concrete 1:3:6 (1 cment:3 sand: 6 graded stone agg. 40mm Nominal size) and curring complete excluding the cost of form work in foundation & plinth

Providing and laying cement concrete 1:4:8 (1 cment:4 sand: 8 graded stone agg. 40mm Nominal size) and curring complete excluding the cost of form work in foundation & plinth within all leads and lifts complete.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in:

Foundation footings bases of columns and the like and mass concrete.

Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level :

Suspended floors, roofs, landing & shelves & their support balconies, beams, girders, bressumers & cantilever upto floor level.

Arches upto floor two level.

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:- Suspended floors ,roofs,landing and shelves and their support, balconies ,beams, girders,bressumers and centileaver upto floor two level.

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:- Foundation and plinth.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth:

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregate 20mm nominal size) at plinth level in: CM 1:6

Providing and fixing angle Iron posts 2.50m high 50X50X5mm and welding of wire mash of interlink chain with in all leads and lifts as per the direction of Engineer - in - charge

Fixing and welding of wire mash of interlink chain of Size 150x150mm of 4mm thick with in all leads and lifts as per the direction of Engineer-in-charge

Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. Providing, fixing & welding of MS Flat 50x 5 mm with in all leads and lifts.

Painting one coats (excluding priming coat) on previously painted steel and other metal surfaces under coat with readymixed paint brushing to give an even shade including cleaning of all dirt dust and other foreign matter.

P/F MS Grill gate.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string courses and the like with in all leads and lifts.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Lloors etc. upto 200mm. In thickness with in all leads and lifts.

Arches upto 6.00 mtrs. Span

Extra for Arches beyond 6.00 mtrs. Span

Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1cement:3 sand)

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level to the entire satisfaction of the Engineer in charge.Tor steel with in all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling,brackets and similar works.

Precast concrete block masonry in partitions walls 10 cm. thick with solid blocks of approvad size i/c quick block closer etc. made of cement concrete 1:3:6 (1 cement:3 sand: 6 graded stone agg. 40mm Nominal & down gauged) in CM 1:3 ( 1Cement: 3 sand)

Providing and placing horizontal layer of filtering media. duly graded screened washed and cleaned as specified by the Engineer-in-Charge.

Top layer Fine sand screened,cleaned washed and graded effective size 0.2 to 0.4mm with uniformity cofficient 2.0 to 3.0 from approved source.

Second layer Coursed sand screened cleaned washed and graded from 3mm to 6mm from approved source.

Third layer Bajri (coarsed) screened washed and graded from 20mm to 25mm from approved source.

Fourth layer Bajri screened washed and graded from 6mm to 20mm from approved source.

Bottom layer Broken stone screened washed and graded from 50mm to 75mm from approved source.

P/F MS manhole cover with frame having weight of cover and frame not to be less than 25Kg.

P/F 500mm Dia man hole cover with frame complete.

P/F cast iron/sand cast iron spun spigot ventilating pipe 65mm dia

P/L & Jointing in treanches GMS tube (MG) and tube fitting (earth work in trenches to be measured and paid seprately) as per the direction of the Engineer-in-Charge including all fittings complete.

80mm dia

fixing of CI Sluice Valve Kirlosker/Ladder Make with hand wheel as per IS 14846-2000 with in all leads and lifts to the entire satisfaction of Engineer-in-charge.

80mm dia.

65mm dia

C/O chamber for sluice valve , 1.80x1.80x1.20 mtr. Size (inside) & RCC top slab in cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) with 150mm thick walls of RCC 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 8 mm bars at not exceeding 150mm centers both ways)

DHAME SHERPA CONTRCATOR