PROVISION OF RAIN SHELTER BUILDING NO. P-89 WITH 10KW ROOF TOP SOLAR PANELS AND CERTAIN REPAIRS UNDER GE HADDO, PORT BLAIR

Amount

S&F MNRE (Ministry of New and Renewable Energy) approved roof top solar photovoltaic power plant consisting of poly crystalline solar modules 320 watts capacity complete all as specified and as directed. Make: HHV / Emmvee / Adani / Tata BP Solar NOTES: 1. Solar PV modules/ Array cells of 320 watts to be packed tightly behind a glass sheet and hermatically sealed between glass and back cover (Tedlar) to protect from harsh environment. 2. The unit rate deemed to include for above provision and all other connected accessories required for complete installation of solar roof top fittings.

S&F module mounting structure for holding solar modules made up of galvanised mild steel sections such as angles, channel conforming to IS:2062 & tubes erected with stainless steel bolts, nuts & washers for withstanding wind speed upto 150 Kmph complete all as specified and as directed.

S&F 10 KW SPV plant on grid inverter system providing 3-phase, 440 volts, 50 Hz output with grid supporting multifunction power conditioning system combining the functionality of a grid interactive solar inverters i.e., string inverters which operates on MPPT (Maximum Power Point Tracking) mode using IGBTs (insulated Gate Bipolar Transistors) with trench gate structure or central inverters consisting packaged solutions which includes two or more inverter connected internally as per the requirement including connectors and 01 No. NET meter digital type necessary components complete all as specified and as directed. MAKE: DELTA/FRONIUS/REFUSOL/KACO/SCNEIDER

S&F AC and DC distribution boxes for monitoring the output of Solar PV arrays or strings and enclosed in IP 65 rated housing consisting cable entry points fitted with cable glands as per the requirement of connection between strings or solar arrays and inverter complete all as specified and as directed.

S&F 4.0 Sqmm size bright annealed 99.97% pure bare copper conductors as in AC and DC cables for connecting array inter connections, array to junction boxes, junction boxes to inverters etc., as per the requirement with necessary lugs and connectors complete all as specified and as directed. Make : Lapp / Siechem / Leoni

NOTES FOR SERIAL ITEM Nos. 1 TO 5: The bidder / contractor has to submit written guarantee of 03 years on Non-judicial stamp paper. However defects liability period will be governed by the policy on the bid submission end date.

M&L for grounding properly array structure of the PV yard with copper strips using adequate number of earthing kits and for ensuring the safety of the power plant by thoroughly grounding all metal casing/shielding of the plant complete all as specified and as directed.

M&L for lightning and over voltage protection for solar power plant complete all as specified and as directed. NOTE: The main aim of this protection is to reduce the over voltage to a tolerable value before it reaches the PV or other sub system components. The source of over voltage can be lightning/atmospheric disturbances etc. Metal oxide varistors shall be provided inside the Array junction boxes. In addition suitable MOVs also shall be provided in the inverter from over voltage.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames), as in doors/windows/cup boards/kitchen cabinets etc., area exceeding 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

M&L for mild steel hold fasts, bands, straps, supports or stays for rainwater, brackets/clamps for eaves and valley gutter and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork complete all as specified and directed.

S&F 200mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

S&F brass sliding door bolt, 300mm long with sand or die cast brass brass hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolts (dia of neck not less than 16mm ) complete all as specified and as directed.

S&F 100mm size butt hinges, extruded brass with mild steel hinge pin, bright polished, type B-11 complete all as specified and as directed.

S&F 150mm size brass handles, fabricated type, polished complete all as specified and as directed.

S&F floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

S&F Mortice night latch, brass, 4-lever, size 75 mm, vertical or round type and fixed with screws complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for designer multi stepped suspended false ceiling with and including 12.5mm thick gypsum board, consisting of intermediate channel of 45x15x0.9mm thick for ceiling (frame work shall be suspended from soffits of roof with raw plugs) finally joints shall be filled with jointing compound and paper tape and surface finished smooth including applying two coats of acrylic distemper complete all as specified and as directed.

S&F stainless steel tubing of any diameter or square or rectangular in shape, thickness of wall not less than 3.15mm of grade AISI-316 (type Austenitic anticorrosive in nature as in railings / grills / designer work including cutting, bending, welding and fixing in any type of location complete all as specified and as directed.

M&L for complete removal of existing treatment by scraping, washing, cleaning etc., and applying two coats of interior emulsion paint (Texture painting) over a coat of alkali resistant primer with glossy finish epoxy top coat including 2 to 3mm wall care putty after filling the cracks with filler complete all as specified and as directed.

S&F plain solid straight chowkats of rubber wood (Rubco wood) frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L for plain, framed, panelled shutter with 24mm, thick superior quality, chemically pressure treated, egde glued, finger jointed/rubber wood boarding panels/beams tongued, thickness of battens 35mm, finished with two coats of melamine polish with asian sealer and wood filler over a coat of honey/natural colour wood filler putty for dust free surface etc., including preparation and applying three types of sand papers and surface finish to a glossy/ mat finish to match with the adjoining surface complete all as specified and as directed. Make of Rubber wood members : RUBCO or equivalent

M&L for 18mm thick designed rubco hut rubber wood frame shutter for cupboard, WHB counter cupboard with finish to match all adjoining surfaces including sanding and applying mixture of filler and NCD thinner (Sheenlac make), pasting chalk putty, applying sealer (Sheenlac make) and wall nut colour stainer and finally applying waxpol (Silicon make) complete all as specified and as directed.

S&F designer POP cornice of desired colour with cross section not exceeding 1800 Sqmm and finishing of connected wall surfaces (300mm both side) to match with existing wall finish.

S&F 12mm thick toughened glass in required size duly crystal polished at the edges and with full etched design finalized by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, Dorma X:C fittings & Dorma floor springs or ss pivot ,stainless steel handles 600mm D type and locking arrangement to each door, stainless hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F 12mm thick toughened glass in required size duly crystal polished at the edges and with full etched design finalised by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, stainless hinges& brackets to connecting to SS railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as directed.

Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.

Taking down old Unserviceable fuse unit / DBs 415 Volt/ 230 volt

Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

Taking down existing light fittings of any type and any capacity complete all as specified and as directed.

M&L for Point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non metallic PVC conduit of suitable size (not less than 20mm dia) medium grade including proper colour coding Phase- red/yellow/blue, neutral-black and earth green and conduit accessories concealed in walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., for ONE LIGHT/FAN point all as specified and as directed. Make: Gloster / Havells / Anchor / Polycab / Finolex

All as Item No. 33, but One light / fan point controlled by one, one way 5 Amp switch

All as Item No. 33, but point wiring for 5-pin switch socket outlet 6 Amps on independent board.

All as Item No. 33, but point wiring for 5-pin switch socket outlet 6 Amps on same board.

All as Item No. 33, but One bell point controlled by one bell push switch 5 Amps one way.

M&L for Point wiring complete with 4.0 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor, drawn through and including rigid non metallic PVC conduit of suitable size (not less than 20mm dia) medium grade and conduit accessories concealed in walls/ceilings etc., including provision of PVC insulated 4.0 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.

S&F modular switch, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

S&F modular switch, one way, one module, single pole, 16 Amps, 240 Volts AC complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

S&F switch socket outlet, modular type, 3 pin, 16A, flush type, controlled by one switch, 240 volts complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

S&F socket outlet, modular type, 1-way, 3 pin, 6A, flush type, controlled by one switch, 240 volts complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

S&F bell push, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.

S&F electric bell, single pole, Ding Dong type, 230 volts, AC supply complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

S&F ceiling fan of three blades, remote controlled, 1200mm sweep, 340 RPM, 65% energy saving, suitable for AC 230 volts, heavy duty with down rod and canopies complete all as specified and as directed. MAKE: Atomberg Model: EFFICIO or equivalent in Havells/ Usha/ CG

S&F stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet, etc as required complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells

S&F exhaust fan blade set of 150mm sweep with louvers including all fixing arrangements complete all as specified and as directed. Make : Atomberg Model : Studio / CG / Orient / Usha / Havells

S&F exhaust fan blade set of 300mm sweep with louvers including all fixing arrangements complete all as specified and as directed. Make : Havells Model : Turbo Force SP / CG / Orient / Usha

S&F and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements complete all as specified and directed Make :CG Cat Part No : CCS-100-20-65-HL2-DP-NWH/ Philips Cat Part No : Astra line plus/C&S/Havells

S&F and testing Tube light fittings 2 feet mirror optical including all accessories and fixing arrangements complete all as specified and directed. Make : Philips Model No LED 48027/65/86 ultron/ CG Cat No LCL-14-CDL/Havells

S&F 18 Watts, 220 Volts surface mounted LED light fitting of size 234mm x 234mm x 25mm including all accessories and fixing arrangements for fixing the light fittings with high performance LED, slim round panel, made from die-cast aluminium and CRCA covering, powder coated in white colour. high efficiency PMMA diffuser complete all as specified and directed. MAKE: PHILIPS, Model: Star Surface or equivalent in HAVELLS/ CROMPTON GREAVES NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

Taking down carefully ceiling fan of any make or any size from its location, handed over to AGE E/M store yard without any damage complete all as specified and as directed

M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection, 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make:Havells/L&T/Indo Asian/Legrand/Schneider

S&F MCCB, 4 pole, 100 Amps, 16KA rupturing capacity,50Hz, 415 Volts with thermal and magnetic release complete all as specified and as directed. Make : Havells/ L&T/ Indo Asian/ Legrand

S&F MCB, SPN, 230 volts, 40 Amps, C series 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No : 811153 /L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811122 to 811129 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

SHUBHAM SHANKAR GAIKWAD

CARTWHEEL CONSTRUCTION

M/s S A Traders

SKV Engineering

SUBASH FURNITURE SHOP

CHANDER SEKER ENTERPRISE

M/s Bismi Builders & Enterprises

RELIANCE SALES AGENCY

M/s K Moorthi

M/s Ramesh Lal