Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.9 Cr
EMD Value
₹5.9 L
Closing Date
9 Jan 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
North Western Karnataka Road Transport Corporation
Divakar S Yaragoppa
Construction of Automated Driving test track in Existing R.T.O premises at Ranebennur.
NWKRTC/2023-24/RD/WORK_INDENT14
NWKRTC/2023-24/RD/WORK_INDENT14
Open
Roads
Two Tender Document System(Two Cover)
North Western Karnataka Road Transport Corporation Head Office
To Qualify for award of this contract the Tenderer has to furnish Liquid assets statement or availability of credit facilities for an amount not less than Rs. 1,17,63,750/- letter of credit issued from any nationalized Bank / Schedule bank ( excluding Co-operative banks ) in the prescribed format. Scanned Copy of the Credit Lines / Letters of Credit / Certificates from any nationalized Bank / Schedule bank (excluding Co-operative banks), clearly specifying name of the work and/or work indent (as per the prescribed format) addressed to the Executive Engineer, NWKRTC, C.E. Department, HUBBALLI.(Annexure-A) duly signed by Bank manager with date.
To Qualify for award of this contract the Tenderer must have PF registration Certificate. Scanned copy of PF registration Certificate.
To Qualify for award of this contract the Tenderer must have valid Class - I Civil Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scanned copy of Valid contractors Registration Certificate.
To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name satisfactorily completed at least one similar nature work of i.e. Concrete Pavement Road works with ancillary RCC Framed Structure building work costing not less than Rs.196.06 Lakhs during the last five years i.e, the work must have commenced on or after 01-04-2018 and completed till last date of submission of tenders. Work Done Certificate shall clearly mention the Date of commencement and date of completion of the certified work with stipulated time limit. Scanned copy of the Work done Completion Certificate, Certified by an Officer not below the rank of Executive Engineer for work done in Govt.,/public sector undertakings.
To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name Executed in any one year (For a Continuous Period of 12 Months) during last five years i.e.from 01-04-2018 till the last date of submission of Tenders. The minimum quantities of works mentioned below. 1.DLC/PCC M-5 or higher grade : 649.00 Cum 2.RCC M-20 or higher grade of concrete : 463.00 Cum 3.Reinforcement Steel -Mild Steel/HYSD/TMT : 70355.00 Kg 4.Water Bound Macadam/Wet mix macadam : 866.00 Cum 5.RCC Pavement concrete M30 or higher grade of concrete : 896.00Cum 6.Earth work Excavation : 4770.00 Cum. These quantities should be executed in, either a single or multiple works in any one year (for a continuous period of 12 months) during the last 5 years. i.e.from 01-04-2018 till last date of submission of Tenders .The sum of quantities executed in all the works during the particular period (continuous period of 12 months) will be considered for evaluation. The quantities executed in works which have not been completed will also consider. Scanned copy of the Work done /Completion Certificate, along with details of quantities executed, Certified by an Officer not below the rank of Executive Engineer for work done in Govt.,/public sector undertakings should be uploaded. Out of the total quantity executed in a single work, or multiple works in any one year (for a continuous period of 12 months) during the last 5 years. Only the quantities executed in a particular year will be considered for evaluation.
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity :- ( (A X N x 1.5) - B) Where A : Maximum value of Civil Engineering works, updated to 2022-23 price level, executed in any one year during the last five years.( Completed as well as works in progress ). B : Value at 2022-23 price level of existing commitments and ongoing works to be completed during the next two years. N : Number of years prescribed for completion of the work for which tender is invited. 1.5 : Multiplying factor for assessing the available tender capacity for works costing morethan Rs.100.00Lakhs. The Bidder/Contractor must submit details of existing commitments and ongoing works to be completed in the prescribed format only (Annexure-B) duly signed In case the Bidder does not have any existing commitments, the some should be indicated as NIL in the prescribed format, duly signed. Details submitted in any other format or submission of document in which the Bidder himself has calculated the Bid capacity will not be considered for evaluation and also will not qualify for eligibility.
To Qualify for award of this contract the Tenderer in his name should have, in the last five financial years ( i.e. during the years 2018-19, 2019-20, 2020-21, 2021-22 and 2022-23 ) achieved in at least two financial years a minimum financial turnover of Rs. 7,84,25,000/- (In all classes of civil engineering construction works only). Scanned copy of year wise audited profit / loss statement of two financial years in which minimum financial turnover of Rs. Rs. 7,84,25,000/- is achieved. (Certified by Chartered Accountant only. Statement issued by others will not qualify for Eligibility).
In case of quoted bid cost of the bidder is less than the amount put to tender, the bidder has to submit a irrevocable bank guarantee issued from any nationalized bank/schedule bank.(excluding co- operative banks) for the difference amount ( difference amount-cost put to bid-the quoted bid amount) at the time of tender submission. The bank guarantee shall be addressed to the Executive Engineer, NWKRTC, CE Department HUBBALLI. The bidder/tenderer has to submit the Bank Guarantee in foolproof sealed cover within 48 hrs from the date and time of closing of tender to the Office of the Executive Engineer, NWKRTC CE Department, Central Office Hubballi. Otherwise the bid will not be considered for evaluation and will not qualify for eligibility.
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
₹5,000
₹5.9 L
2 Dec 2023
2 Dec 2023
11 Jan 2024
18 Dec 2023
18 Dec 2023
Pavement Concrete
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approvedGravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, ...
Removal of Unserviceable Soil with Disposal upto a suitabledistance as directed by the Engineer incharge of work (CSR2023-24/SRP-vol 3/17/3.1/301)
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
providing and laying in cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver, Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GG...
Supplying, fitting and placing Mild steel reinforcement complete in sub structure as per drawing and technical specification (CSR 2023-24/P- Vol-I /18/2.12/a)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying 80mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions upto 10MSA& for Residential Str...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement mo...
Water Bound Macadam, Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including
spreading in uniform thickness, hand packing, rolling...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Water Supply & Sanitary Arrangements
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Filling approved earth (excluding rock) in trenches, plinth sides of foundations and other similar works etc. in layersnot exceeding 20 cms in depth, consolidating each deposited layer by ramming and ...
Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge. (CS...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Constructing brick maconary inspection chamber of internal dimention 600 X 450 mm, and depth of 600mm ( Inner dimension ) with modular bricks of class designation 75 in Cm 1:6 bed concrete 150mm thi...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992,IS 4127 with latest amendments, including conveying to work site...
Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1...
Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1...
Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1...
Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. bra...
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern of W.C of pan size 580mm (CSR2023-24/ Vol-II (126/14.13.1)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval Shape...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. (CSR2023-24/Vol.2/ 127/ 13.59)
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (CSR2023-24/ Vol-II /115/13.5.1)
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore (CSR2023-24/ Vol-II 117/13.4.3)
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore (CSR2023-24/ Vol-II /117/13.3.1)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and laying 80mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions upto 10MSA& for Residential Str...
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomin...
LMV Control Rooms
Earth work excavation by manual means for drains,canals, waste weirdraft, approach channels, key trenches, foundation ofBridges and suchsimilar works, in all kinds of soils as per drawing and technica...
Earth work excavation by manual means for drains,canals, waste weirdraft, approach channels, key trenches, foundation ofBridges and suchsimilar works, in all kinds of soils as per drawing and technica...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 15 mm thick cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and...
Providing 12 mm tk cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of...
Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with truded built up standard tubular sections/appropriate sections and other sections of approved make conforming to...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials,labour complete as per specifications and as per directions o...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and laying 80mm thick factory made precast M -30grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS15658 for Commercial Traffic Axle load repetitions upto 10MSA& for Residential Str...
Earth work excavation by manual means for drains,canals, waste weirdraft, approach channels, key trenches, foundation ofBridges and suchsimilar works, in all kinds of soils as per drawing and technica...
Earth work excavation by manual means for drains,canals, waste weirdraft, approach channels, key trenches, foundation ofBridges and suchsimilar works, in all kinds of soils as per drawing and technica...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed w...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Aligning in the planting area along the contours & marking for pit (without staking) (CSR 2021-22/ Vol 8 /12/2.8a)
Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) and planting of wel...
Loading & unloading of Polythene Bagged Seedlings: Loading of polythene-bagged seedlings into the vehicle at the nursery site and unloading at the site nearest to the planting site Seedlings raised in...
Transportation: Transportation of polythene-bagged seedlings in hired truck from the nursery site to planting site 14" x 20" size bags (CSR 2021-22/Vol -8 /12/2.4f )
Conveyance of tall seedlings raised in HDPE bags of size 14" x 20" from the dumping point to the planting site near each pit on head-load, fixing the supporting stake firmly in the pit, planting the t...
Planting: Planting of P.B. Seedlings after tearing with blade & removing the polythene bags in trenches / pits including scooping the soil to required depth, pressing the soil gently around the seedli...
Refilling of trenches, cutting the edges of the excavated trench on the lower side & refilling the trench with 75% of the excavated earth duly breaking the clods & formation of uniformly sloping conti...
clearing of land by cutting of thick and sparse growth plants(0.25 mt thickness plants and clearing of bushes along with roots( throwing away to 1.5mtr height and 50 mtr far) (CSR 2021-22/ Vol -8 /48...
Planting of Shrubs, Digging pits of size 0.45 x 0.45 x0.45m filling 50% of the pit with top soil and remaining 50% of pit with1:2:3 proportion of sand (0.007), FYM (0.014cm) red earth (0.021cm) and an...
Planting of Ground cover plants Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soiland remaining 50% area with 1:2:3 proportion of sand (0.0375 cum),FYM (0.075 cum) red earth (0....
Rose garden/growing of rose plants Digging pits of 0.6x 0.6 x0.6m size and filling 50% of the pit with top soil and remaining 50% of pit with 1:6:6 proportion of sand (0.008), FYM (0.048cm) red earth ...
Growing of Hedges Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with1:2:3 proportion of sand (0.0112), FYM (0.0224cum) red earth (0.0336cum...
Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio.mixing and spreadingthe mixture to 7.50cm thickness wherever required red soil ,farm yard manure & Sand (CSR 2021-22/Vol -8 /49/12.10 E))
Procurement of quality lawn grass (a) Bermuda Gras (CSR 2021-22/ Vol -8 /49/12.10 G A)
Procurement of quality lawn grass (a) Mexican Grass (CSR 2021-22/ Vol -8 /49/12.10 G C
Labour Charges mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers,digging, levelling , and dibbling with lawn grass at a spacing of 5cm x5cm & as per the direc...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, c...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Providing and fixing gun metal non- return valve of approved quality (screwed end) Vertical : (CSR2023-24/Vol-2 / 117/ 13.6.1.2)
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (CSR2023-24/ Vol-2 / 127 /13.59 )
Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant RO+UF) with all accessories piping, product water tank on single phase power supply as per th...
Electrification works
Internal Wiring: Open Conduit System, Supplying heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesiv...
Internal Wiring: Open Conduit System, Supplying heavy gauge PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive ...
Internal Wiring: Open Conduit System, Supplying heavy gauge PVC conduit pipe 32mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste ...
Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC J...
Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junc...
Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 32mm dia 2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, ...
Supplying heavy gauge PVC Conduit Pipe 20mm dia mm 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing...
Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing ...
Supplying heavy gauge PVC Conduit Pipe 32mm dia 2.5mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracin...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm etc. ...
Supplying PVC/GI flexible conduit pipe 20 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy ga...
Supplying PVC/GI flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge ...
Point Wiring using Copper without switch:-
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5 Sqmm (Phase ...
Medium point above 3m upto 6 mtr from tapping point to outlet via switch box. CSR 2023-24, Volume-VI,PART-III ,Utilization, SRP 5 of 105/ 2.2.2
Long point above 6m upto 10m from tapping point to out let via switch box. CSR 2023-24, Volume-VI,PART-III ,Utilization, SRP 5 of 105/ 2.2.3
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A One way Switch. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A Two Way Switch. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-V...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A Three Way Socket.
Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volum...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator.
Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volu...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 A One Way Switch.
Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32 A D.P. Switch. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-V...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 A Universal Socket.
Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Vo...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. R J 45/I.O.Out let Cat-6
Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Vol...
Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws. CSR 2023-24, Volume-VI,...
Supplying And fixing of 6 A electrical accessories on existing switch board. 6 A Ceilling Rose. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-VI,PART-III ,Utilization...
Supplying And fixing of 6 A electrical accessories on existing switch board. 6 A Batten Holder. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-VI,PART-III ,Utilization...
Supplying of 1 X 4' feet 36/40 W PVC Batten with integrated LED tube 36/40 W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen ma...
Supplying of recess mounting non integrated type LED down light 10-12 W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded ...
Supplying of recess mounting non integrated type LED down light 10-12 W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded ...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power ...
Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare c...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare c...
Supplying and Fixing of 32 mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street ligh...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.
CSR 2023-24, Volume-6, Part-III ,Ut...
Supplying of exhaust fan 1440 rpm 300 mm (12") Size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.Make:Bajaj /Orient / Almonard /Usha /Crompton. ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and w...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixin...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. CSR 2023-...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0...
Control Switch Gears & Accessories: Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision f...
Supplying 100 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V .
CSR 2023-24, Volume-6, Part-III ,Utiliza...
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
CSR 2023-24, Volume-6, Part-III ,Utilization,
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for ...
Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.
CSR 2023-24, Volume-6, Part-III ,Utilization,
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, d...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...
L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistiv...
L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistiv...
L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistiv...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displ...
Laying of cable in Existing Trench /GI Pipe / Stone ware pipe /RCC Hume pipe using Wooden /Aluminium Rollers as directed by the departmental staff.LT Cable 2.5 to 25 Sqmm. CSR 2023-24, Volume-6, Par...
Aluminium End Terminal (Lug)- 10 SQmm size.
CSR 2023-24, Volume-6, Part-III ,Utilization,
Aluminium End Terminal (Lug)- 16 SQmm size.
CSR 2023-24, Volume-6, Part-III ,Utilization,
Aluminium End Terminal (Lug)- 25 SQmm size.
CSR 2023-24, Volume-6, Part-III ,Utilization,
PVC Pipe as per IS-2509-100 mm dia.
CSR 2021-22,Volume-VI, SRP 15 of 27/392-48.09
PVC Pipe as per IS-2509-150 mm dia.
CSR 2021-22,Volume-VI, SRP 15 of 27/393-48.10
Digging of Pit for providing GI Pipe type Earthing. Hard Soil. CSR 2023-24, Volume-6, Part-III ,Utilization,
SRP 43 of 81, 22 / 1.6.2 (Per Pit)
GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg. CSR 2021-22,Volume-VI, SRP 17 of 27/439 -54.01
Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each.
CSR 2021-22,Volume-VI, SRP 17 of 27/440 -54.02
Good Quality Salt for grounding purposes packed in 50 Kg gunny bag.CSR 2021-22,Volume-VI, SRP 17 of 27/441 -54.03
GI Pipe B - Class as per IS-1239-G I Pipe 40mm Dia.
CSR 2021-22,Volume-VI, SRP 16 of 27/409 -49.04
GI Pipe B - Class as per IS-1239-G I Pipe 63 mm Dia.
CSR 2021-22,Volume-VI, SRP 16 of 27/411 -49.06
Supplyimg & laying of RCC NP-3 300mm dia Pipe .
PWD CSR 2021-22, Volume-1, SRP A-40/48
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable: 2.5 to 25 SQmm.
CSR 2023-24, Volume-6,...
Supplying & running of Copper strips for grounding connections, using necessary fixing materials as required. 25 X 6mm Copper strip.PWD ELE SR 2019-20, SRP 40/6.3.7
600 X 600 X 3mm Copper Plate.
PWD ELE SR 2019-20, SRP 40/6.3.7
Supplying & fixing of DANGER BOARD made out of MS sheet metal with two coats of non corrossive enamel paint. PWD ELE SR 2010-11. SRP 66/12
Supplying & Installation of RUBBER MAT 1mt X 2mt-10mm thick.
PWD ELE SR SRP 66/13.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Annexure B Bid Capacity.doc
Tender Document • 0.03 MB
annexure A LOC.doc
Tender Document • 0.03 MB
Tender notification RTO Track Ranebennur.docx
Instructions to Tenderers • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .