SPECIAL REPAIR TO BUILDING NO. P 17 AT 7 AFH KANPUR CANTT

Amount

S & F steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed to wall and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

All as per item No 1 above but bore of pipe 20 mm complete all as specified and as directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth complete all as specified and as directed.

Dismantling of cast iron soil pipes jointed in cement mortar up to and including 100 mm dia complete all as specified and as directed.

S&F cast iron soil waste and vent pipes, sand cast pipe 75 mm dia, in any length with or without ears with lead joints fixed on walls complete all as specified and as directed.

All as per item No 5 above but 100 mm dia pipe.

S&F in repairs CI bend(any radius) 75 mm dia , diminishing pieces or tapers with oval access door complete all as specified and as directed.

All as per item NO 7 above but 100 mm dia

S & F in repair cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.

S&F in repairs Cast iron Nahani trap 75mm dia outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 , 1:2:4 complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 750 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing to where directed complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in kerbs , copings , bed plates, bases of tank padding / tank staging concrete complete all as specified and as directed.

S&F in bib taps ,cast copper alloy ,fancy type long shank ,chromium plated with capstan ,head screwed down ,high pressure ,screwed for iron pipe 15 mm bore and fixed complete all as spd and directed .

S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and directed.

S&F in repair 15 mm stop valves (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15 mm stop angle vavle cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs brass chromium plated grating of size 127 mm dia , all as specified and directed.

S&F in repair chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed .

S&F chromium plated soap dish complete all as specified and directed.

S&F in repair wall mixture 15 mm dia with provision for over head shower with 115 mm long bend pipe on upper sizw connecting legs & wall flange, fixed with 15 mm GI pipe complete all as specified and directed. Make : Cat No FLR-CHR-5273UPR of Jaquar or equivalent make as mentioned in Appx of PS.

S&F in repairs Gun metal globe or gate valves 20 mm dia with iron wheel head screwed both ends, for iron pipe and fixed complete all as specified and as directed.

S&F in repair ball brass valves 20 mm dia high pressure with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs vitreous china white squatting pan orrissa pattern size 630x450mm with integral foot rest including provision of lime concrete bedding fixed complete all as specified and directed.

S& F in repair PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets complete all as specified and directed.

S&F in repair vitreous china wash hand basin white size 550x400 mm including bracket , CP waste coupling of size 32mm dia, pillar taps ,waste pipes , chain and plug etc complete all as specified.

S&F corner glass shelf 300mm (with brass brackets) of Cat No BEA-44 of make- Prayag or equivalent in Cera/Essco.

S&F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including waste coupling & waste pipe complete all as specified and as directed.

S&F in repair stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed.

Demolition of cement concrete /lime concrete of any description and in any position not otherwise specifically provided for , such as sunken floor filling etc, complete all as specified and directed.

M&L 25 mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to stores and rubbish off the premises.

M&L for joint free nonskid joint free 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n, exc 0.18 sqm in floor etc ceramic tiles of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

M & L for vitrified light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and directed.

M&L for joint free glazed ceramic tiles in vertical surfaces 350 x250 x7mm/450x350x7mm thick of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including backing 10mm thick in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor aprons, slabs and shelves etc laid in bedded in cement mortar

M&L of granite of (type and colour as approved) of 20mm thick rubbed and polished, edges rounded fully moulded in cooking plat forms, shelves and like in CM 1:4 including pointing in white cement 1:2 using marble dust and with admixture of pigment to match the shade of granite over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed

S&F in Repairs PVC (SWR) pipes 110 mm single socketed in any length , with rubber ring joints fixed to walls including necessary iron clamps fixed on wall,roof complete all as specified and directed.

S&F of PVC (SWR) bends /shoes 110 mm complete all as directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, achies, pillars complete all as specified as directed.

M&L brick workwith Sub Class `B' bricks , straight or curved on plan exc 6 m mean radius builtin CM 1:4 complete all as directed.

Taking down cement plaster or brick or stone walls/ concrete surfaces including taking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and applying two coats of cement based paint over a coat of primer on walls complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finished even and smooth without using extra cement and applying three coats of white wash on ceiling complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick walls and surface finished even and fair without using extra cement and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick wall care putty complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames ( without taking off shutters from the frame exc 1.5sqm but n. exc 4 sqm each complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing . (Note : The unit rate quoted by contractor includes 3 Nos 75mm SS butt hinge, 2 Nos 125mm handle, 100mm tower bolt-01 No, 01No, 250mm sliding bolt, all other connected accessories) complete all as specified and directed

M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

S & F 35mm thick 2nd class hard wood plain framed panelled shutter (any numbers of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partical board with commercial face venneers; supplied and fitted to chowkats.complete, all as specified and directed.

S&F MS but hinges , medium weight cold rolled of size 100 mm thick complete all as specified and directed.

S&F aluminium anodised sliding bolt 300 mm long with hasp, staple (bolt type) and fixing of sheet, cast or extruded sections and fixing bolts complete all as specified and directed

S&F aluminium anodised barrel tower bolt 200 mm long extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodised handle of size 150 mm fabricated type complete all as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

S&F in repair 250mm size mild steel door springs complete all as specified and directed.

S & F 18 mm thick 100% Lead free both side plain laminated WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges lock etc for shutter should be included rated quoated by the contractor.

M&L for PCC (1:3:6) type C-1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.

M&L for Framed work as grills with end bars shoulders/framed guard bars/gas bank/gate/framing barred iron doors,ladders,framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and similar work conforming to Fe-410 or 310 complete all as specified and directed

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling mild steel windows/ventilators/grill of any description complete all as directed.

M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter included guard bare of 10mm MS square frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill included in above rates & PCC for pressed steel frame will be paid separately.

M&L 16 mm thick of size 600x600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (bevelled tegular) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping, main runner and cross runner and to comprise main tee/runner 15mm x 38 mm size (load carring capacity 14 kg/sqm) spaced at 1200 mm centres securely fixed to the structural soffit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200x 600 mm module, cut sub cross tee/runner 600mm require independent support. Wall angle of size 19mm x 19mm, secured to the periphery of the wall at 450 mm maximum centres. The above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350 mm from wall by using 3.50 mm dia aquiline wire with suitable fasteners and hook clip complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp insulation etc) or insulation boards/slabs/ brlankets, any thickness including cover fillets.

M & L plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping kerbs benching all as specified and directed.

Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, mud phuska, PCC,PCC tiles etc racking out joints, hacking for key scrubbing down with water etc, and removing rubbish out side of MD land complete all as specified and directed

M & L PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) thickness as required at site) for padding concrete as on roof, mixed with and including water proofing compound as per manufacturer instructionetc complete all as specified and directed.

M&L water proofing treatment on existing cleaned RCC roof comprising with the following operation and as specified here-in-below:- (a)Rendering 10mm thick in Cement Mortar 1:4 on cleaned Concrete surfaces of Roof, finished fair surfaces including curing of plastered surfaces mixed with and including water proofing compound ponding of Water over the Roof (Levelling Course) for 7 DAYS. (b)Applying evenly one Coat of Cold Bituminous Primer conforming to IS-3384-1986, @ 0.30 liter per sqm on the Cleaned Plastered Surfaces. (c) Providing 3 mm thick, APP modified water proofing membrane weighing not less than 3.50 Kg/Sqm reinforced with non-oven polyester fabric weighing not less than 160 gm /Sqm all as per detailed specifications, sealed with overlaps shall be with torch application and applying two coats of aluminium reflective paints complete all as specified and as directed . NOTES : - (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. and laid over primed surface by LPG/ butane torch, all as per manufacturers instructions.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Mild steel wind ties for roof including securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces,perlin,rafter etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over a coat of primer over and including 1 mm thick wall care putty complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls /ceiling etc and applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old wooden surfaces of any description and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old steel surfaces of windows and ventilators including oiling/greasing in hinges and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of external weather proof acrylic emulsion paint with anti algae weather proof, 100% Acrylic emulsion with silicon additives that offers an anti algae and high performance exterior wall finish complete all as specified and directed.

M & L for reinforced cement concrete type B-1,1:2:4 (using 20 mm graded granite stone aggregate) in beams,cantilevers, lintels.(Note: formwork required for lintel/beam included rate quoted by contractor)

S & F Mild steel TMT 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. (Note: welding/insertion of bars with existing bar/column included rate quoted by contractor) complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified and directed.

M&L for point wiring (concealed) for one light/bell/ceiling/exhaust fan point controlled by one switch in and including rigid non-metallic PVC medium grade conduit 20mm dia size including cutting, chases for conduits, sinking for boxes for concealed conduit with 1.5 sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for phase and neutral with flush type metal boxes modular type suitable for fixing modular switches, sockets fanregulator etc. with white colour cover plate with brass screw and including PVC insulated unsheathed mulit stranded copper conductor cable of 1.5 sqmm as in earth wire connected to common earth and earth dolly as per IS complete all as specified and directed. Note - Rates shall be deemed to be including mounting concealed boxes and modular cover plated of suitable module.

All as per Serial item No 88 above but for one 3 pin 5 Amp switch socket outlet point on same board complete all as specified and directed.

All as per Serial item No 88 above but for one 3 pin 5 Amp switch socket outlet point on independent board complete all as specified and directed.

All as per Serial item No 88 above but for one 3 pin 15 Amp switch socket outlet point on independent board using 2.5 sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for phase, neutral and earth wire complete all as specified and directed.. Note for item no. 88 to 91 (i) Rates shall be deemed to be including mounting concealed boxes and modular cover plated of suitable module. (ii) Necessary PVC rigid junction boxes for identifying junctions as required on site and as directed by Engr-in-charge for point wiring work with PVC dummy plates shall be deemed to be included in the quoted rate. (iii) Same size wire shall be used for phase neutral & earth conductors (iv) The wiring shall be done strictly by following proper colour code, using red , yellow & blue for phase and black for neutral and green for earth.

S & F modular switch 1 way 6 Amp, 1 module, 240 Volt complete all as specified and directed.

S & F bell push modular switch 1 way 6 Amp, 1 module, 240 Volt complete all as specified and directed.

S & F modular switch 1 way 16 Amp, 1 module, 240 Volt complete all as specified and directed.

S & F modular socket outlet for 3 pin 6 Amp and 2 pin 5 Amp multi purpose, 2 module , 240 Volt complete all as specified and directed.

S & F modular socket outlet for 2 in 1,3 pin 6 &16 multi purpose ,2 module, 240 Volt complete all as specified and directed.

S & F modular fan regulator step type, 120w, 2 module , 240 Volt complete all as specified and directed.

S & F ceiling rose surface backelite three terminals, PVC/Polycarbonate, insulated body complete all as specified and directed.

S & F bell electric,240 volt, single pole complete all as specified and directed.

S & F Lamp holder,240 volt, PVC/Polycarbonate, with back plate suitable for batten fitting complete all as specified and directed.

S & F Metal clad single pole and a nuetral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp,240V complete (for geyser) complete all as specified and directed.

S & F Metal clad single pole and a nuetral enclosure with a two pin and earth plug and socket with one single pole MCB SP 32 Amp,240V complete all as specified and directed.

S&F fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of minimum size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as directed.

S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 Watt 220 V,AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED ligth fitting 9W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair of security LED luminaire 36 W system with all accessories including GI mounting bracket of suitable size incl connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Exhaust fan AC single phase 230/240volt of size 300 mm in sweep, metallic body complete with all accessories incl connecting up with three core flexible copper conductor cable of suitable size and making holes, groting nut bolts in wall for exhaust fan complete all as specified and directed including taking down old one & deposited in MES store yard.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn Iin and including PVC conduit concealed with all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 6 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVCconduit concealed and connected to the terminal and common earth dolly all as specified and directed. (Note. Two run of cable and one run of PVC conduit concealed and one run of earth continuity wire shall be measured as one run complete all as specified.)

M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC conduit concealled with all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 4 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVCconduit concealed and connected to the terminal and common earth dolly all as specified and directed. (Note. Two run of cable and one run of PVC conduit concealed and one run of earth continuity wire shall be measured as one run complete all as specified.)

S & F in repair of VTPN distribution board, doule door 4 ways with including incomming 125 Amp MCCB , 16 KA,4 pole as incomer and suitable for fixing of MCBs as outgoing with IP-43 protection, with suitable lugs for incomer, cable glands and bottom lugs for outgoing distribution system complete all as specified and directed.

S & F in repair SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed.

S&F in repair Isolator SPN , up to 63 Amp , 240 Volt complete all as specified and directed.

S&F in repair MCB SP upto 40 Amp ,240 Volt C curve complete all as specified and directed.

M & L for Earthing complete with galvanized steel earth plate electrode 60 x60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, medium grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm reinforced with 8 mm dia TMT bars 100 mm c/c including one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing medium grade for watering ,charcoal and salt in alternate layers including excavation earth work all as shown in Electrical plate no 3 of SSR Part-I. complete all as specified and directed

Supply and fixing electric water heater storage type steel body with S/S inner tank and heating element upto 2KW capacity 25 Litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and as directed including taking down old one & deposited in MES store yard.

SHRI SHAYAM KRIPA

M/s JS Constructions

M/s DKS Engineering Works

Khalil Ahmed and Sons