ADDITIONAL WORKS FOR REFURBISHMENT OF MCT LAB AT PGAD, ANNEX BUILDING

Total work station area admeasured in 48.6 inches width with keyboard slider tray X 32 inches deep with 24 inches with 2 X 1 Aluminium section framing of Doddle partition above the work station with 18 Inches width X 31 inches height with 7.

storage box including Drawer (7X1.46=29.12 sft)

Aluminium office cabin size : 8 inches Witdth X 9.8 height x1 side and 8 inches width sliding door with 9.8 height - 02 cabins

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

12 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6 pin 15/16 A socket outlet

15/16 A switch

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4Way(4+12) Distribution Board, Double Door

Supplying and fixing 40A, four pole,(three phase and neutral), 415 V, residual current circuit breaker(RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 amps rating 4P , 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply, Installation, Testing & Commissioning of the 120W LED Flood Light Fixture Along With all accessories and complete.

Jai Mata Di Works