BMSICL/Infra/05/2026 GR-20, Construction of 05 UHWC at Block-Dariyapur, Mashrakh, Marhowra, Manjhi and Chhapra, in District- Saran

GR 20, Construction of 05 UHWC at Block-Dariyapur, Mashrakh, Marhowra, Manjhi and Chhapra, in District- Saran

SCHEDULE ITEMS

CIVIL

c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

PLUMBING

100 mm dia

Sand cast iron S&S as per IS - 3989

Internal Work - Exposed on Wall

Concealed work including cutting chases and making good the walls etc.

Internal work - Exposed on Wall

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Size :- Length = 3.0 M. Width = 2.0 M Total Depth = 2.50M

TOTAL OF CIVIL AND PLUMBING INCLUDING GST @ 5.36%

ELECTRICAL

Point Wiring in PVC Conduit, With Modular Type Switch :-

Twin Control Point wiring in PVC conduit, with modular type switch :-

Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-

TOTAL (ELECTRICAL)

TOTAL OF SCHEDULE ITEMS (CIVIL+PHE+ELECTRICAL)

GR 20, Construction of 05 UHWC at Block-Dariyapur, Mashrakh, Marhowra, Manjhi and Chhapra, in District- Saran

NAME OF FIRM

ADDRESS OF FIRM

NON SCHEDULE ITEMS

CIVIL

PLUMBING

Providing and fixing M.S. cap 100 mm dia and M.S. socket 100 mm dia

Providing and fixing in position 100x50 mm dia GI reducing elbow including fix to floor with cement mortar.

Providing and fixing 100 mm dia. GI inlet fitting/ Extension Piece with 2 or 3 inlets of 32 to 50 mm dia, fixed to CI trap with Drip Seal joint and set in cement concrete as per drawing complete.

Providing and fixing in position 110x63 mm dia uPVC balcony Drain including fix to floor with cement mortor.

Providing and fixing of uPVC Waste pipes 6 kg/cm2 (IS: 4985:2000) including with all fittings e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement as per Manufacturer's specifications complete including cutting holes or chases in wall and making good the same wherever required. (Waste pipe from fixtures AND LAB WASTE).

50 mm dia

32 mm dia

Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.

Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming to IS 2878, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges.

Providing & Fixing of stored pressure Fire Extinguisher ABC powder type (Mono Ammonium Phosphate Powder) Magnetic Pressure Gauge having the facility to check at site, Discharge Time less than 9 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 21A, B Rating 55B as per BS EN-3 BIS 15683 marked, Can Construction : Deep drawn & CO2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating ofCan : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, Helium LeakDetection Tested, Warranty.

ELECTRICAL

Supply, Installation, testing and commissioning of 2 KVA online with 60 mints backup on 100% load including accessories/ materials etc.Rated Capacity: 2 KVA / 1800 Watts Phase: Single Phase In, Single Phase Out DC Voltage: 72V (7AH/12V *6 Nos.Battery inside)

SUPPLY OF L.T. CABLE:

Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Insulated armoured cable conforming to IS:7098 (Part - I) complete with all Amendments etc. as Required

NON MEDICAL FURNITURE

Waste Disposable twin buckets Providing and supplying twin bucket waste disposal trolley for hospital use, suitable for segregation of biomedical waste as per IPHS and Bio-Medical Waste Management Rules, 2016. The unit shall consist of a stainless steel (SS) or powder-coated mild steel frame mounted on four swivel castor wheels (minimum 50 mm diameter) for smooth mobility. The frame shall support two color-coded plastic buckets (minimum 15–20 liters capacity each), one in red and one in yellow, for separate collection of infectious and non-infectious biomedical waste

Chairs for patient waiting area (3 in 1)Waiting Room -Providing and Supplying 3 seater Metal Waiting chair having Seat made of Perforated Cold Rolled Steel Epoxy Powder coated having thickness of 1.2mm . Arms and Legs are made of Aluninium for superior Strength and durability. Seat Seat Frames are supported on Steel Beams with thickness of 2mm duly powder coated. Seat and Back are single piece duly Epoxy powder coated.

Office Chair Providing and supplying Medium Back Chair with Mesh Back with back tilt tension adjustable . The chair mesh is available in 6 different colours ( Green / Ruby / Cinnamon / Magenta / Indigo / Black ) with matching or contrast seat fabric according to the choice of the client . The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair comes with 1-D adjustable armrests with PU Pads . Seat size is 490 mm W x 435 mm D and the Chair Height 975 mm - 1070 mm . Overall size of the chair is 630mm W x 550 mm D x (975 mm- 1070mm) H . The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years.

Office Table Providing and fixing Office desk structure of rectangular shape . Primary work surface over all size is 1200mm (Lx 600mm) (Dx 750mm) (H 25mm) thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . modesty panel made of mm thick. understructure made of 18mm thick with wire management hole with pvc grooment on table top. Provision of side unit of size is 600mm (Lx 400mm) (Dx 600mm) (H)(combination construction full table look like in h-shape from front side side and table top is based on 2 + 2 80mm thick boxes shape made in same as enginnered wood table is made in a different style right side fixed pedestal with 3 drawers + left side on filling storage shelve. 1 filing box fixed pedestal + 1 fixed pedestal with 3 equal drawersin provided with central lock for security and handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with fecia of drawers. Three layer prelaminated particles board(wood product of grade ii type iii of is 12823/latest.

Doctor Table Providing and fixing Office desk structure of rectangular shape . Primary work surface over all size is 1500mm (Lx 600mm) (Dx 750mm) (H 25mm) thick table top made of prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . modesty panel made of mm thick. understructure made of 18mm thick with wire management hole with pvc grooment on table top. Provision of side unit of size is 600mm (Lx 400mm) (Dx 600mm) (H)(combination construction full table look like in h-shape from front side side and table top is based on 2 + 2 80mm thick boxes shape made in same as enginnered wood table is made in a different style right side fixed pedestal with 3 drawers + left side on filling storage shelve. 1 filing box fixed pedestal + 1 fixed pedestal with 3 equal drawersin provided with central lock for security and handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with fecia of drawers. Three layer prelaminated particles board(wood product of grade ii type iii of is 12823/latest.

Reception Table Registration/COUNTER - L1500*600D*750H with 3drawer unit Providing and Supplying Table As per above + Side on both Sides . The Worktop at 750mm Height is 600 mm Deep. Reception Table has 300mm Depth Table Top Fixed on Top of frame. The Thickness of this Counter Top is 25mm . The Frame Height is 1200mm and is 50 mm thick and made of Aluminium Extrusions of 1.2 mm to 1.5mm thickness. The System is complete hollow system with space for wire reticulation . All the frames will be duly powder coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10 leveling bolts.board.The Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of 0.8mm - 1mm thick CRCA steel & powder coated. The electrical raceway can be provided below worktop or above worktop.The partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. The free space available within raceway accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile: Constructed out of 5mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made out of 5mm - 8mm thick Pre-laminated Medium Density Fiber Board (MDF) Bottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes. Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. All Worktops to have Metal Insets for fixing screws. Specially designed powder coated M.S. brackets having 2mm thickness fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge banding on front side. Gable Ends are fixed with 3mm thick MS brackets to Frame and with 3mm thick Brackets to Worktops. Sealed edge in table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge banding on non working side. Reception Table has 3Drawer Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit

Screen Separators with stand Providing and supplying hospital bedside screen separator consisting of a 4-panel foldable frame made from 19 mm diameter mild steel (MS) tubular pipes. The frame shall be powder-coated with a minimum thickness of 50–60 microns to ensure corrosion resistance and durability in medical environments. Each panel shall have a width of approximately 600 to 700 mm, and the overall height of the screen shall be approximately 1650 to 1800 mm. The panels shall be fitted with high-quality, flame-retardant, and washable curtains made of fabric or Rexine, suitable for frequent hospital use. The entire structure shall be mounted on 50 mm smooth-rolling castor wheels for easy mobility and repositioning within hospital wards. The screen shall be designed for easy folding, compact storage, and quick deployment. The unit shall be complete in all respects, including frame, curtains, wheels, and necessary accessories, ready for use at site

Steel Almirah/Cupboard/storage chests Providing and supplying a heavy-duty steel almirah/storage cupboard made from CRCA (Cold Rolled Close Annealed) steel sheets with a minimum thickness of 0.8 mm to 1.0 mm for body and shelves. The almirah shall be approximately 6 feet (1800 mm) in height, 3 feet (900 mm) in width, and 1.5 feet (450 mm) in depth. It shall be provided with a minimum of 4 adjustable shelves, offering 5 compartments for storage. The unit shall be fitted with a pair of hinged doors having a built-in locking system with handle and key, ensuring secure storage. All steel components shall be treated with anti-rust primer and finished with a scratch-resistant powder coating (minimum 40–50 microns) in a standard gray or beige color. The base shall be suitably reinforced for load-bearing. The almirah shall be supplied fully assembled and ready to use, suitable for storage in hospitals, offices, or institutional settings.

Stool for attendants Providing and supplying attendant stool with a sturdy and durable mild steel (MS) tubular frame made from 25 mm diameter pipe, finished with anti-corrosive epoxy powder coating (minimum 50 microns) for long-lasting use in hospital environments. The seat shall be round or square, made of high-density pre-laminated board or cushioned with foam and covered in washable Rexine or PVC leatherette. The stool shall be approximately 450–500 mm in height, suitable for comfortable seating. The legs shall be fitted with non-slip rubber shoes for floor protection and stability. The stool shall be lightweight yet strong, designed for use by attendants or visitors in hospital wards or waiting areas.

MEDICAL EQUIPEMENT & FURNITURE

TOTAL OF NON SCHEDULE ITEMS (CIVIL+PHE+ELECTRICAL)

TOTAL NSI IN WORD