ADDITION/ALTERATION AND SPECIAL REPAIRS TO MAIN STAGE, TOILETS AND GREEN ROOM AT OUTDOOR SPORTS AREA AT DMRL AND BLDG No.65 AND 65A AT EDF/DOLP BUILDING IN DRDL UNDER GE(I) RND KANCHANBAGH, HYDERABAD

Amount

S & F Mild steel work in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S & F MS steel work in tubular trusses/purlins and tubular posts including special shaped washers etc., complete using ERW or induction but welded tubes confirming to IS 1161- 1979 grade St 240 complete all as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surfaces of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emeny paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- Apex Altima of Asian Paints or techno commercially equivalent in Indigo, JSW

M&L for PCC 1:4:8 type D2( using 40mm graded aggregate) in foundations etc complete all as directed.

S & F Machine pressed precast concrete interlocking paver block any shape and size with gray cement and pigment (approved by GE) confirming to IS 15658-2006 of 60 mm thickness, M-35 grade over 15mm 1:4 screed complete all as directed.

M & L for machine cut Kota stone slab 20 to 25 mm thick in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed of 15mm in CM 1:4 complete all as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 for backing of Dado/ Skirting complete all as directed.

M & L for Granite (of any type) tiles 20 mm thick machine cut in skirting/ dado/window cills and cooking platforms, laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including cutting and polishing of tiles complete all as directed.

M & L for machine cut Kota stone slab 20 to 25 mm thick in skirting laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

S&F S/S grade 304 railing hand rail horizontal rails and verticles complete incl grinding and buffing at joints all as specified and directed including taking down old existing railing.

Taking down existing roof treatment of any description, any position with bituminous felt including plaster/loose concrete and removing rubbish to a distance exceeding 500m but not exceeding 1000m and roughening the surfaces of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete all as specified and directed.

M&L for brushing neat cement slurry with 3 Kg of cement per Sqm over the RCC slab and sides complete all as directed.

M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule.

Supply only integral water proofing compound Make :- SCOTT /AQUA PROF/RAILIA

M&L for water proofing treatment with polymeric standard membrane of weight not less than 3kg per sqm reinforced with polyster non wove fabric (wt not less than 150gms/sqm) laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame on horizontal/vertical/slope surface on roof complete all as specified and directed. Note: Water proof treatment consist of as under: - (i) Applying one coat of bitumous primer conforming to IS 3384 @ 0.3 ltrs per sqm (ii) Laying APP based memberane as specified thickness and weight. (iii) Appplying one coat of bitumen grade 85/25 @1.20Kg per sqm.

M&L for preparation of surfaces of any description, over 10cm in width or girth otherwise described and appplying two coat of aluminium paint @100ml per sqm over APP membrabe sheet complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm complete all as directed.

S&F Steel window with side hung shutters incl box type hinges with steel handle and steel peg stay complete with glazing bars devaluated or welded, complete all as directed.

All as per srl items No.21 here-in-before without glazing bars complete all as directed.

S & F in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as directed.

S & F Factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with2,4 or 6 raised panel design with 2mm thick mouded PVC sheet on front face & 2mm plain colour PVC sheet on back face with wood free EPS Core all as per specification complete all as directed.

S & F 125 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type B 21 complete all as directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as directed.

M&L for Non-skid coloured ceramic joint free tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floors/vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile incl 15mm thick screed bed cement motar 1:4 complete all as specified and as directed.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement including 10mm thick backing coat with CM of 1:4 complete all as specified and as directed.

Supplying and Fixing in repairs Vitreous Chinaware wash hand basin white, oval shape of size 510 mm X 450 mm counter top including taking down the existing fitting complete all as required at site and as directed

S & F in repairs Vitreous Ware wash down water closet (Pedestal), white (EWC) and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete including taking down the existing fitting.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigments to match with the shade of granite and polishing the exposed edges as required.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets.

M&L for 20mm thick granite slab of any colour /shade, table rubbed and polished as urinal partition of size 400mm X 1200mm both sides polished and exposed edges shall be half rounded and polished, fixed in wall in cement mortar (1:4) including pointing in white cement and marble dust mix (1:2) with admixer of pigment to match with the shade of granite all as specified and directed.

S & F Waste coupling suitable for wash baisn, urinal, sink etc., of PTMT (Half or full threaded) of minimum weight 45 grams, and fixed to discharge pipe of 32 mm dia., bore in repairs

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges in repairs

S & F in repairs 15 mm bore Fancy type Chromium plated bib taps two way, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed.

S & F in repairs Fancy type chromium plated 15 mm bore Angle/ plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.

S&F in repairs 15mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F brass chromium plated Health faucet, standard size, of make as approved by GE complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Dismantling of existing AC/PVC soil and waste and rain water pipe 100mm dia including fittings,viz, bends , tee from walls/ floor/ trenches complete all as directed.

Dismantling of existing AC/PVC soil and waste pipe 75mm dia including fittings,viz, bends , tee from walls complete all as directed.

M & L in repairs for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) Soil,rain water, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.

S & F 110 mm bore PVC (SWR) Vent Cowl

S & F 75 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 750 mm long, 40 mm dia., PVC flexible Waste pipe for sinks/ wash hand basins/ urinals.

M&L for precast reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of old work Note: TMT steel shall be measured and paid separately.

Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

S & F 1000 litres capacity Rotational moulded polyethylene triple layered water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down of existing one complete all as directed.

S & F in repairs 25 mm dia Ball brass Valves, high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as directed.

S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as directed.

M&L for complete removal of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm each to level the surface and finshied smooth with emeny paper No.180 followed by emeny paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- Apex Altima of Asian Paints or techno commercially equivalent in Indigo, JSW

M&L for Complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint on surfaces of walls over a two coats of wallputty (1.5mm each) to make surfaces smooth complete all as directed.

M&L Pre painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling old AC sheet complete all as specified and as directed

M&L Pre painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in ridge fixed with self tapping screws including dismantling ridges complete all as specified and as directed

Dismantling framed trusses of span n.exc 10m complete all as directed.

S&F for MS work in Bands, straps, supports or stays for RWP, ventilating pipes, gutters including bolts, if reqd hooks (stay), clamps, holdfasts, wall ties, nosing angles, hooks for hanging fans and similar small articles conforming to Fe-290 gde E-165 complete all as directed.

S&F structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angle cleats or other connecting plates gde Fe-410-W complete all as directed.

S&F roof trusses (framed), trussed purlins, crane gantries, rails and fastening including distance pieces, cleats, gusset plates etc gde Fe-410-W complete all as directed.

S&F Chequered mild steel plates of Gde Fe 410-W , forming holes with out any attachment in duct cover etc including taking out old/broken RCC duct cover of any thick complete all as directed.

Demolition of cement concrete(un reinforced) in ground floor and paving n.exc 15 cm thickness (below or above GL) and removing the rubbish to a distance n exc 500m

M&L 50mm thick Cement concrete type B-0, 1:2:4 (20mm graded aggregate)as in floor including finished floor surface even and smooth with using extra cement.

Treating cement concrete or granolithic concrete surfaces with three dressings or sodium silicate solution

S & F of 48 mm width Glass dividing strips, 3mm thick and and inserted in position to conform to design

M&L PCC 1:2:4 type B-1 (using 20mm graded stone agg) 100mm thick as in floor finished even and smooth with out using extra cement .

Taking down cement plaster of any description on brick/concrete or stone walls,ceiling including raking out joints, hacking for key scrubbing down with water etc., complete all as directed.

M&L for walling of random rubble masonry uncoarsed, well bedded, bonded and solidly hearted built in CM 1:6 including demolition of old stone work complete all as directed.

M&L Rendering 15mm thick in CM 1:6 on brick/stone masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L Rendering 20mm thick in CM 1:4 on stone masonry at any height, surfaces finished even and smooth without using extra cement including mixing WPC as per instructions complete all as directed. Note: WPC shall be measured and paid seperately

Preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L for Preparation of old treated steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as directed.

Preparation of new steel or iron surfaces of any description over 10cm with or girth not otherwise described and applying two coats of black bituminous paint complete all as directed.

M&L for preparation of new plaster surface of existing treatment and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint on surfaces of walls over a two coats of wallputty (1.5mm each) to make surfaces smooth complete all as directed.

M&L PCC 1:2:4 type B-1 (using 12.5mm grade stone agg) as in benching, roof kurbs incl demolition of old concrete complete all as directed.

S&F Powder coated sliding window shutters with aluminium sections weighing 0.55 kg/m with nessecary rollers, complete all as specified and directd (except panels) complete all as directed.

S& F Powder coated Aluminium grill DECO grill No.DG-916 complete all as directed.

M&L for powder coated standard aluminium section frames as in aluminium doors/sliding windows/partitions etc including glazing clips, fabrication and fixing in position complete to receive sheet glass/particle board complete all as specified and directed.

S&F Powder coated aluminium door shutters with vertical section weighing 1.29 kg/m, top/bottom section weighing 1.94 kg/m middle section weighing 1.24 kg/m including necessary joining cleats,glazing clips,rubber neoprene packing, handles 02nos in each door,hinges,snap beading, screws (excluding panels) complete all as directed.

Dismantling of wall and ceiling boards of any thickness including cover fillets as required, complete all as specified and as directed.

M & L for providing and fixing Gypsum Board 12mm thick in wall covering with screw including two coats of OBD over a coat of primer complete as per manufacturer instruction all as directed.

S&F false ceiling with pre-coated standard GI angle, Tee and grid suspended with 2 mm dia GI wire at 600mm c/c ,Angle of size 25x25x0.7mm fixed around, main Tee and Cross Tee of the secstion 38x25x0.7mm with soffits clips, holding and level clips, Gypsum board of 12.5 mm thick with white paper layer on face side of size of size 600x600 mm or any size as directed and applying two coats of acrylic emulsion over a coat of primer all as directed.

S&F for double action door spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel sheet cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as directed.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out hard/dense soil, complete all as specified and as directed.

Sand filling under floor (or) in fdn incl watering and consolidation, complete all as specified and as directed.

M&L cement concrete type D2 (1:4:8) as in 100 mm thick sub base, complete all as specified and as directed.

M&L cement concrete (1:2:4) type B-1 as in 40 mm thick floor, complete all as specified and as directed.

S&F in repairs for Saftey lever locks mild steel with 4 lever for rolling shutter complete all as specified and directed.

S&F in repairs 75mm width guide for rolling shutter complete all as specified as directed.

S&F in repairs for Top hood cover complete all as specified as directed.

S&F in repairs for providing 1.25mm thick laths complete all as directed.

Preparation of old painted surface of steel and applying two coats of Aluminium paint complete all as specified

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in padding concrete, coving of vertical junctions, coping of vertical junctions, coping and and plateform for OH water tanks etc on roof top, complete all as directed by Engr-in-charge.

S&F in repairs of steel tubing and connections and supply and fixing 15mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and as directed.

S&F in repairs steel tubing and connections and supply and fixing 20mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and as directed.

Material & labour for concealed point wiring using 1.5 Sqmm nominal cross sectional area copper conductor multi stranded, PVC insulated unsheathed drawn in existing conduits and fittings, press steeled terminal boxes, 3 mm Bakelite sheet top cover (ISI marked) fitted with Chromium plated brass screws & washers and 1.5 Sqmm nominal cross sectional area copper conductor multi stranded, PVC insulated unsheathed earth wire and connecting to earth with brass screws washers etc. complete all as directed.

One light point controlled by one 5 amps one way switch

One fan point controlled by one 5 amps one way switch

One 3 pin socket out let 5 Amps switch socket controlled by one switch same board with wire 1.5 Sqmm multistandered

One 3 pin socket out let 5 Amps switch socket controlled by one switch Independently with wire 1.5 Sqmm multistandered

M & L for point wiring complete with 4 Sqmm PVC insulated unsheathed single copper conductor 1100 V grade drawn in conduit and conduit accessories concealed on walls /roof/floor etc with 1 run 2.5 Sqmm PVC insulated and unsheathed multi standard copper earth continuity conductor connecting to common earth dolly complete for power points.

Supply and fixing Sheet Metal enclousure Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 Amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make- Legrand / Schneider/C&S

M & L Sub main wiring with 2 single core 1100 V confirming to IS 694 PVC ins insulated unsheathed cable 4 Sqmm multistandard copper conductor drawn in conduit and conduit assessories concealed on walls / roof/floor etc with 1 run 2.5 Sqmm PVC insulated and unsheathed multistandard copper earth continuity conductor connecting to common earth dolly complete. Note : 2 Runs of 4 Sqmm cable, 1 run of 2.5 Sqmm cable earth continuity conductor one length of conduit pipe shall be measured as one length, including cutting chases.

S & F modular switch one way 6 Amp, one module 240v complete.

S&F modular switch 16 Amp one module 240v complete.

S & F modular socket, 6/16 Amp 2/3 pin combined 2 module, 240v complete..

S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete .

Taking down ceiling fan/ exhaust fan/ Wall mounting Fan of any make, sweep and dismantling, cleaning , greasing, overhauling and providing two coat of synthetic enamel paint of existing colour and refixing to its existing place including connections with new flexible cable 3 core copper conductor complete. For Ceiling fan - adjustment for providing new down rod upto 1.2 mtr including new canopy, clamp, rubbr reel, complete all as directed.

S&F Exhaust fan 300 mm sweep,1400 rpm with louver 230 volts single phase oscillating complete including making suitable hole on wall, plastering and smoth finishing of wall and other civil works complete all as directed Make-Bajaj/Havells/CG

Supply & fix LED High bay, 145 W, 230V complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.all accessories all as directed Make :- Wipro / Philips/CG

Supply & Fixing surface mounted round down lighter LED Lumunaire 2x15W, 6000 CCT K with inbuilt driver and polycarbonate diffuser, 230v Energy efficient, with Drive and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make : Cat Part No LZOMMLR215XC of Jaguar or equivalant in Philips/CG

Supply & fix LED Flood light fittings, 250W, 230V complete with all accessories internally pre-wired and including connecting up with twin core hvisted flexible copper conductor cable with suitable size.all accessories all as directed Make :- Wipro / Philips/CG.

S&F in repairs LED fitting.indoor Batten light , 36 w, 5700k , 230v Energy efficient, with Drive , connecter block, etc. complete with all accessories internally pre-wired and including connecting up with twin core hvisted flexible copper conductor cable with suitable size. Make : Cat Part No LDL-36-CDL of Crompton or equivalant in Philips/CG

S&F MCCB DB sheet metal enclosure 415 volt facility to fix MCCB in incomer and MCB's outgoing, TPN vertical type 4 ways, Double door type complete fitted with bus bars neuteral links, G Frame including MCCB 63Amp capacity 50 Hz 16 KA breaking capacity blanking plates & cable entry boxes making good the distubed surfaces so as to match with the existing surfaces complete .

Material & Labour Sub main wiring 4 runs 6 sqmm copper conductor multistranded ISI marked single core FRLS 1100V grade in and including suitable size of stove enameled ERW steel conduit ISI marked conduit along with Flame proof accessories Concealed/ surface type stone/ brick masonry walls, roofs, floors etc including provision of 2 x 4 sqmm FRLS PVC copper conductor earth continuty and connecting to common earth dolly complete.

Supply and fix timer switches time lite distribution board 32A 3 pole , 230V, Analog time switch complete all as directed. Make : Cat Part No : TL032AB0 of Indoasian or equivalent in Havells/L&T

Supply & fixing MCB TP 32 Amps complete 415 V 50 Hz is items complete all as directed. Make- Standard/L&T/Leagard/HPL

Supply & fixing MCB SP 5- 32 Amps complete 415 V 50 Hz is items complete all as directed. Make- Standard/L&T/Leagard/HPL

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed

Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as directed

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed

Supply and spreading of dry river sand in trenches/ transformer yard / two pole structure yard for cable protection complete all as directed. Note:- Punned thickness only shall be measured for payment purpose.

M&L for laying common burnt bricks, sub class 'B', of size 230 x 115 x 75 mm in trenches for cable protection complete all as directed.

Supply, laying, testing and commissioning in trenches/ ducts, fixed on walls/panels of LTUG cable, 1100 volts grade of size 3.5 Core x 70 Sqmm PVC insulated, PVC unsheathed armoured with aluminum conductor cable complete including lugs of requied sizes all as directed for the following nominal cross sectional areas of cables :-

Earthing using aluminiam plate 60X60cm x6mm thick electrode buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge not less than 1.5m below ground level connected to GI strip of 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation RCC cover watering pipe funnel PCC pit complete and frame work complete all as shown in electrical plate No.3 of MES Sch ‘A’ Part-I complete all as direcetd.

Taking down old unserviceable point wiring (Light,Fan,bell,Socket or power) complete including fixture and fittings such as switches, ceiling roses,regulators, sockets, light fittings etc and making good to the disturbed surfaces of walls,ceilings and floor match the existing shade complete all as specified and directed.

Material and labour for point wiring complete with 1.5 Sqmm single core PVC FRLS insulated unsheathed cable voltage up to and including 1100 volts grade multi-stranded copper conductor drawn through and including rigid PVC conduit medium grade 20mm or higher dia ISI marked as required at site including condult accessories such as junction boxes, inspection covers etc, surface type on stone/brick masonry walls, roofs, floors etc by means of saddles and clips etc including making good of disturbed surfaces to match existing surface where required including suitable surface tpe PVC gang boxes (ISI marked) as per number of switch/sockets modules fixing switches, sockets, fan regulators etc of required size including provision of PVC insulated 1.5 Sqmm copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and directed for the following:-

One light/ fan point controlled by one, one way switch/bell push

All as per item No. 133.01 above but for 5 Amps socket on independent board

All as per item No. 133.01 above but for 5 Amps socket on same board

All as per item No. 133.01 above but wiring with 2.5 Sqmm for 15 Amps switch socket combination on independent board/two pin earth plug and socket including providing 2.5 Sqmm PVC insulated FRLS unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly.

Supply and Fixing piano switch single pole, one way 6 Amps complete all as specified and directed.

Supply and Fixing piano switch single pole, one way 16 Amps complete all as specified and directed.

Supply and Fixing socket 6 Amps multipurpose 2 in 1- 2/3 pin combined complete all as specified and directed.

Supply and Fixing socket 6/16 Amps multipurpose 2 in 1 -2/3 combined complete all as specified and directed.

Supply and Fixing ceiling rose three terminals Poly carbonated isolated body complete all as specified and directed.

S&F in repairs High bay 100W LED light fittings IP65 protected luminaire robust open type vertical Highbay/Mediumbay LED IP54 luminaire with high power LED as light source of luminous efficiency not less than 120 lm/w complete color temp 5000Kinclduing fixing to the ceiling usin necessary fastner/hook for hanging the lights and connecting with three core 2.5Sqmm round copper cable from ceiling rose to the connector of the fitting all as specified and directed. Make :Havells Cat No. BAYBRITEFLAREHB100WLED757APWBBOLTG or equivalent of Wipro/Philips/Crompton

S&F in repairs LED security light fiitting of luminous capacity 3500lumens,IP-66 protection, 5700K CCT, inbuilt electronic driver with <10%THD made up of die cast alluminium housing with high power LED as lighting source and lens embeded toughned glass cover ,seperate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade 1.5Mtr long bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed by Engr-in-charge. Make:Havells cat part No. ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC or equivalent in Wipro/Crompton.

S&F in repairs indoor vertical/horizontal surfacemounting pressure die-cast aluminium well glass NEO -IP65 40W LED complete with all accessories prewired and including connecting up with three core twister flexible copper conductor cable with anchor bolt fastener complete removing unserviceable fittings all as specified and directed. Make : Havells Cat No. ENDURA WELL GLASS NEOTSS40WLED757SPCSO or equivalent of Philips/ Crompton/ Wipro

Material and Labour for sub main wiring with 4 runs of 6 Sqmm single core ISI marked PVC FRLS insulated unsheathed cable 1100 Volts grade multistranded copper conductor cable drawn through in and including surface rigid PVC conduit medium grade of size not lless than 25mm dia and conduit accessories such as bends, tees, junction boxes type on walls, roof, floors etc.. including providing 2 runs of 6 Sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor and connecting to earth dolly wire including taking down unserviceable sub main wiring and conduit all as specified and directed. Note :- 4 Runs of 6 sqmm cable 2 run of 6 sqmm cable and 1 run of PVC conduit shall measured as one unit for the purpose of payment. Make For Copper wire : Finolex/Nicco/Havells/Gloster/KEI For PVC conduit : Sudhakar/Polyplast/Supreme/GM

S&F in repairs sheet metal enclosure for DBs (double door type) when MCB TPN to be used as a incommer and MCB - TPN as a out going, single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F in repairs MCB TPN 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing. Make: Legrand/L&T/ Siemens

S&F in repairs C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed. Make: Legrand/L&T/Siemens

S&F in repairs metal plug and socket with 20 Amp SPN MCB metallic P&S complete all as specified and directed.

Disconnecting and taking down indoor and outdoor unit of split AC of any make and capacity upto 2 Ton with stabiliser from the existing position, servicing, gas top up minor repair and refixing the same after renovation of the building

Material & Labour Chemical Earthing, maintenance free with 17.2mm electrode copper coated steel rod 3 mtrs long using 23 kg of powerfill and 9kg powerset compound with brass clamps (earth pit not less than 3.0 M deep below normal ground level) with top edge of the electrode connected to copper earth strip 20x3mm (up to 7.5m in length from the earth electrode) by means of bolts, and nuts check nuts and washers of brass all as specified and shown in electrical plate No 5 of SSR part I including necessary escavation and earth work in any type of soil, RFR, removal of soil to a distance not exc 50 mts, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1, 40MM thick cover with MS rod 8mm dia 150mm long reinforcement all as specified and incl taking out old earthing directed incl taking out old earthing and tested on completion. Make : Jef Techno solutions PVT. Ltd. or equivalent of Indelec or as approved by the GE

S&F in repairs GI tubing 40mm dia light grade for protection of GI earth wire complete all as specified and directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated location for loop earthing etc. as required of size 20x3mm copper strip complete all as specified and directed.

Design, supply, erect, testing & commissioing of motorization including motor & mechanisation equipment for existing mechanical rolling shutter (any size upto 1MT weight) in one single unit with 1 Ton lifting capacity by replacing the rolling spring assembly with new cylindrical type rolling assembly and chain crant in absence of power complete with ball bearing and springs which enable minimum cost of maintenance with single phase push button starter with all connection, copper wiring complete, limit switches, control wiring with copper conductor including necessary dismantling / refixing of rolling shutter, addition / alteration civil works etc., complete all as specified and directed.

Dismantling & taking down existing down conductor, roof conductor, test point termination rods from the building complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtrs below ground level with the top edge of earth plate at a depth of not less than 1.5 mtrs below normal ground level, connected to and including galvanised iron earth strip of size 32x6 mm with GI medium grade protection pipe of 40 mm dia for earth electrode upto test point or upto 7.5 mtr whichever is less, by means bolts, nuts, check nuts and washers of galvanised iron including necessary excavation earth work in any type of soil, PCC pit (1:3:6) type C1 and RCC cover (1:2:4) type B1 of 40 mm, watering pipe 20 mm dia GI pipe, wire mesh, funnel, lugs, charcoal, salt etc complete all as per electrical plate No. 3 or SSR Part-I complete all as specified and directed. Note : GI strip and GI pipe 40 mm dia beyond 7.5 metres per earth will be measured and paid separately.

S&F in repairs GI strip of size 32x6mm complete all as specified and directed.

S&F in repairs aluminium strip of size 25x3mm complete all as specified and directed.

S&F test point consisting of terminal box, drilled and screwed with 22 swg GI cover including 2 Nos 12mm dia 25mm long hexagonal head screws jointing GI and aluminium strips with bolts, nuts and washers on and including jointing plate made of gun metal or phosphor bronze of size 90x32x8mm complete enclosure/terminal block assy grouted in wall at 600 mm height from the length protection level by means of two nos 40x40x5mm MS plate with 6mm dia anchored bolts embedded in wall including nuts and washers all as specified and directed and shown on drawings

S&F in repairs single pointed air termination aluminium rod 12mm dia 600mm long and including 40mm dia GI Medium grade support pipe 600mm long, 25x6mm MS flat iron clamps, bolts/nuts and washers etc lower end of pipe fitted in a 40mm dia GI socket screwed and welded on and including MS base plate of size 300x300x6mm thick grouted on top surface of the wall with 4 Nos 12mm dia regged MS bolts/nuts washer etc on GI pipe secured firmly laterally on the wall surface in a vertical manner by means of rugged bolts grouted on the walls including nuts and washers etc upper end of pipe duly plugged lower end of Air termination rod duly jointed/welded with down/ horizontal conductor complete all as specified and directed and shown on drg..

Maruthi international

SHAH ENTERPRISES

M/s ANUSHA ENTERPRISES