CERTAIN REPAIR TO STEEL FURNITURE UNDER GE NAMS AMRITSAR

Amount

ALMIRAH LARGE/ MEDIUM STEEL

Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of almirah large steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge.

All as per Ser item No. 1.00 here-in-before but replacement of unsv Shelves made out of PBI sheet 1 mm thick.

All as per Ser item No. 1.00 here-in-before but replacement of unsv Mild steel chromium plated(CP) handle 120 mm of approved quality

All as per Ser item No. 1.00 here-in-before but replacement of unsv Mild steel lock 65 mm with screw, key plate and keys of approved quality

All as per Ser item No. 1.00 here-in-before but replacement of unsv Locking device complete as per drg.

All as per Ser item No. 1.00 here-in-before but welding to Almirah large/medium steel

LOCKER STEEL

Supply & fixing as in replacement of unserviceable Legs made out of PBI sheet 1 mm thick of Locker steel including cutting, welding, turning, bending etc all as shown on drg, as specified and directed by Engineer-in-Charge

All as per Ser item No. 2.00 here-in-before but replacement of unsv Bottom Sheet made out of PBI sheet 1 mm thick

All as per Ser item No. 2.00 here-in-before but replacement of unsv Chromium plated(CP) handle 100 mm

All as per Ser item No. 2.00 here-in-before but replacement of unsv MS hasp and stapple 75 mm.

TABLE OFFICE OFFRS STEEL (FD-84(M), FD-1004)

Supply & fixing as in replacement of unserviceableTable top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. Note:- Joints in Block board shall not be accepted in any case. Rest all as shown on drg, as specified and directed by Engineer-in-Charge

All as per Ser item No. 3.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per Ser item No. 3.00 here-in-before but welding toTable office officer steel

All as per Ser item No. 3.00 here-in-before but replacement of unsv Rubber Shoes black in colour of approved quality.

TABLE OFFICE CLKS STEEL (FD-84(M), FD-1003)

Supply & fixing as in replacement of unserviceableTable top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. Note:- Joints in particle board shall not be accepted in any case. Rest as specified and directed by Engineer-in-Charge/ GE

All as per Ser item No. 4.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

All as per Ser item No. 4.00 here-in-before but replacement of unsv Rubber Shoes black in colour of approved quality.

TABLE STEEL 900x900mm FD-1009

Supply & fixing as in replacement of unserviceable Table top made out of 19 mm thick Prelaminated particle board teak faced including hard wood (Teak) beading 19x6mm all around the table fixed with nails all as shown in drg. Note:- Joints in particle board shall not be accepted in any case. Rest as shown on drg, as specified and directed by Engineer-in-Charge.

All as per Ser item No. 5.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 5 .00 here-in-before but replacement of unsv Rubber Shoes black in colour of approved quality.

TABLE 900x600mm STEEL WITH/WITHOUT DRAWER FD-1007

Supply & fixing as in replacement of unserviceable Table top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. Note:- Joints in particle board shall not be accepted in any case.Rest as shown on drg, as specified and directed by Engineer-in-Charge.

All as per Ser item No. 6.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top rail/side rail and 'H' type stiffners.

All as per Ser item No. 6.00 here-in-before but replacement of unserviceable PVC toe black in colour of good quality.

All as per Ser item No. 6.00 here-in-before but replacement of unserviceable drawer complete including necessary denting, repairing, welding bottom channel complete all as directed.

Charpoy GI Pipe Newar

Removing of old unsv newar from charpoy GI pipe and supply and new nylon newar not less than 1.5 kg per charpoy. Rest all as specified and directed by Engineer - in -Charge.

Removal of unsv long rail from existing frame of charpoy of GI pipe and supply and fixing of new long rail made out of GI pipe 32mm nominal bore medium grade ISI marked all as specified and shown on drg.

Removal of unsv short rail from exiting frame of charpoy of GI pipe and fixing of short rail made from unsv long rail retrieved from charpoy GI pipe against Ser No 7.02 above after cutting threading of both ends to the requires size complete all as specified and shown on drawing.

Removal of unsv leg from existing frame of charpoy GI pipe and fixing by made from unsv long rail/Short rail retrieved from charpoy GI pipe as per ser item No. 7.02 & 7.03 here-in-before including cutting threading complete all as specified.

Repair of Charpoy GI frame including tightning, cutting, threading of both ends to the required size of long rail, short rail, leg complete all as specified shown on drawing.

Removal of unsv elbow three way 32mm bore from existing frame of Charpoy GI pipe and supply and fixing new elbow GI three way 32mm bore medium grade ISI marked all as specified and shown on drawing.

Removal of unsv check nuts from existing frame of charpoy GI pipe supply and fixing new check nuts GI 32mm bore medium grade ISI marked all as specified and shown on drawing.

Charpoy Folding Steel

Removing of old unsv plytop from charpoy folding and supply and fixing new 12 mm thick plywood BWR grade ISI Marked on same plateform with screws. Rest all directed by Engineer - in -Charge.

Repair of Charpoy folding frame including straighting/welding complete all as specified shown on drawing.

Chair Varandah FD/MAP II/06

Taking down of unserviceable plastic seat,back & hard rubber shoes from chair verandah and apply one coat of synthetic enameled white paint to chair after preparing the surface of chair verandah.

Supply and Fix seat and back of chair varandah as shown in drg. Make Amko/Swastik

Canning ( Chair Varandah) (FD-359)

Taking down of unserviceable plastic canned / Newar & hard rubber shoes from chair verandah and apply one coat of synthetic enameled white paint to chair after preparing the surface of chair verandah.

Repairing of chair varandah including cutting, welding, turning , bending etc

Re-canning of chair verandah back and seat with cane plastic 4mm wide semi round white colour in mat pattern all as specified and shown on drawing.(FD-359)

Replacement of hard rubber shoes to leg of chair verandah of approved quality complete all as specified.(FD-256 & FD-359)

TEAPOY VARANDAH MAP FD/E6/MAP/17

Supply & fixing as replacement of the following unsv component/parts of Teapoy verandah steel including cutting, welding, turning bending etc complete all as specified and shown in drg Teapoy top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg.

All as per Ser item No. 11.00 here-in-before but replacement of unserviceable MS square conduit 25 mm having 1.6 mm wall thickness as in legs, top and bottom rail/side rail

Replacement of unsv rubber shoes of approved quality to teapoy verandah MAP complete all as specified and shown on drg

Chair Computer FD/E6/MAP/01

Supply & fixing as in replacement of unserviceable acrylic fiber with foam cushion & PVC Beading of approved shade of seat & back of chair Computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of armrest made of black integral skin polyurethane reinforced of Chair Computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of lifting Mechanism with 100mm stroke length of Chair Computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of pedestal of size 700mm with 05 Nos of nylon twin coaster wheels of chair computer as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of twin wheel nylon coaster wheels of chair computer as shown on drg, as specified and directed by Engineer-in-Charge

Chair Writing MAP (FD/E6/MAP/12)

Supply & fixing as in replacement of unserviceable acrylic fiber with foam cushion & PVC Beading of approved shade of seat & back of chair Writing as shown on drg, as specified and directed by Engineer-in-Charge

Replacement of armrest made of black integral skin polyurethane reinforced of Chair Writing as shown on drg, as specified and directed by Engineer-in-Charge

Charpoy IP Hardtop FD/MAP-II/01

Removing of old unsv plytop from charpoy IP Hardtop and supply and fixing new 12 mm thick plywood BWR grade ISI Marked. Corners of plywood fixed on charpoy should be rounded off properly complete all as specified and directed by Engineer - in -Charge.

Replacement of unsv rubber shoes of approved quality to Charpoy IP Hard Top complete all as specified and shown on drg

Bed Hard FD/E6/MAP/08 ®

Removing of old unsv plytop from Bed Hard and supply and fixing new 12 mm thick plywood BWR grade ISI Marked. Corners of plywood fixed on Bed Hard should be rounded off properly complete all as specified and directed by Engineer - in -Charge.

Replacement of unsv rubber shoes of approved quality to bed Hard MAP complete all as specified and shown on drg

TABLE BED SIDE MAP (FD/E6/MAP/15(R)

Supply & fixing in replacement of unsv top made out of 18/19mm thick prelaminated particle board of teak shade, 6mm Teak wood beading all round the top of table bed side MAP using 1st class seasoned hard wood Teak including dismantling of unsv components all as specified and shown on drg.

All as per Ser item No. 16.00 here-in-before but replacement of unsv side wall made out of 18/19 mm thick prelaminated particle board of Teak shade, 6 mm Teak wood beading all round the sides

All as per Ser item No. 16.00 here-in-before but replacement of unsv rear wall of 6mm plywood and polishing complete all as per drg

All as per Ser item No. 16.00 here-in-before but replacement of front part of bottom drawer made of 18mm thick prelaminated particle board complete as per drawing

All as per Ser item No. 16.00 here-in-before but replacement of front part of upper drawer made of 18mm thick prelaminated particle board complete as per drawing

All as per Ser item No. 16.00 here-in-before but replacement Telescopic Channel of 1 mm thick complete as per drawing

All as per Ser item No. 16.00 here-in-before but replacement CP Handle complete as per drawing

Table Computer FD/E6/MAP/03

Supply & fixing as in replacement of unserviceable Table top made out of 18/19mm Prelaminated particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. Note:- Joints in particle board shall not be accepted in any case.Rest as shown on drg, as specified and directed by Engineer-in-Charge/ GE

All as per Ser item No. 17.00 here-in-before but replacement Telescopic Channel of 1 mm thick complete as per drawing

Repairing of table computer including , welding, turning , bending etc

PAINTING TO STEEL FURNITURE

Material & labour for painting to Almirah steel medium with shelves complete internal and external including top and bottom. after preparation of old painted surface and making smooth surface for spray painting inside/outside with synthetic enamel paint olive green, Smoke grey, black or white shaded as per drawing & directed by Eng- in-Charge. FD-1032

All as per Ser itemNo. 18.00 here-in-before but on Almirah steel medium with shelves complete external including top & bottom. FD-1032

All as per Ser item No 18.00 here-in-before but on almirah large with shelve complete internal and external including top and bottom.FD-1031

All as per Ser itemNo. 18.00 here-in-before but on almirah large with shelves complete external including top and bottom.FD-1031

All as per Ser itemNo. 18.00 here-in-before but on Locker steel complete internal and external including top, bottom & shelves.FD-1029

All as per Ser itemNo. 18.00 here-in-before but on Locker steel complete external including top & bottom and shelves.FD-1029

All as per Ser itemNo. 18.00 here-in-before but on Table office clerk steel.FD-84(M),FD-1003

All as per Ser itemNo. 18.00 here-in-before but on Table office officer steel.FD-84(M),FD-1004

All as per Ser itemNo. 18.00 here-in-before but on Table 900x900x760 steel.FD-1009

All as per Ser itemNo. 18.00 here-in-before but on Table 900x600x760 steel with drawer/without drawer.FD-1007, FD-1008

All as per Ser itemNo 18.00 here-in-before but on Charpoy folding Steel

SANMATI UDYOG (BID ID -3333127)

Modern Enterprises (BID ID -3334031)

BALWINDER SINGH AND SONS (BID ID -3324981)

om parkash and sons (BID ID -3333638)