Civil work required for installation of new AHU in Instrument factory at HAL Factory Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.65280.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of item

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Disposal of dismantled material like Lime, moorum, building rubbish, brick, concrete, MS parts etc By Mechanical Transport including loading,unloading and stacking upto 2.0 km distance including the cost of labour,T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing & layingin position cement concrete of grade 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying reinforced cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bharatcoop/Dala/Jhansi) in sub-structure upto plinth beam e.g. column, footing, plinth beam, floor, pavement, drain, chilled water trench,underground water tank, including, compaction, curing, materials, labour, mechanical mixing, making contraction joints/grooves (if required), wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying bricks (non modular) of class designation 10 (having crushing strength 100 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation, drains, manholes, chambers, ducts, chiiled water trench, toe wall, water tank, etc or any description of similar works, including necessary cutting of bricks as required, wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Cutting chases in brick masonry walls 50 mm diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) including compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON/, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing , fabricating and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. MS works In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of all labour material, cutting as per site requirement, T & P, erection, scaffolding, wastage etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing M.S. Tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including cost of all labour material, cutting as per site requirement, T & P, erection, scaffolding, wastage etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings like MS handle, MS hinges (heavy duty), locking arrangement, bushes for fixing of door, complete, including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces, cost of all labour, material, welding, cutting, cartages, loading, unloading, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing & fixing at all heights, levels and locations 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. including cost of all labour, material, welding, cutting, cartages, loading, unloading, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note -Cost of truss/frame work shall be paid separately).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including cost of all labour, material, cutting, cartages, loading, unloading, finishing, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality, cost of all labour, material, cutting, cartages, loading, unloading, finishing, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing Powder Coated Aluminium (minimum thickness of powder coating min. 60 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00 mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (All fittings like -Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing powder coated Aluminium (minimum thickness of powder coating min. 60 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note: Glazing, paneling and dash fasteners to be paid for separately)

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in is all an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators withextruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness of make Saint Gobain/Modigaurd or as approved by EIC.(weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and fixing aluminium powder coated tower bolts 250 mm x 10mm, ISI marked, powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with necessary screws, including materials, labour, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing Aluminium sliding door bolts 300 x 16 mm, ISI marked powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with nuts and screws, including cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium powder coated handles 125 mm, ISI marked powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour and shade, with necessary screws, including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete, including cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1: 4 (1 cement: 4 coarse sand) on wall & ceiling of rough / fair faces of brick / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including making contraction joints / grooves, hacking of concrete surfaces, T&P etc as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and applying white cement based putty of make J&K/ Birla/ Asian / Berger etc or as approved by EIC, of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, preparation of surfaces by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joineryincluding cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI or as approved by EIC, to walls of any description at any height / depth of required shade and colour all complete to achieve even shade and colourn new/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description, any girth at any height with first quality synthetic enamel paint of make Asian / Shalimar / Berger as approved by EIC, of approved tint and shade over a coat of suitable primer for respective surface primer of above brand, including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material).

Providing and laying PVC Flooring 02mm thick heavy duty, industrial use & flexible non directional, multi colour polymer chips PUR surface protection, homogeneous PVC flooring rolls in width of 2m and continous length of 20m or as per manufacturer's specification, laid in floors/ skirtings in approved design and shade of approved make such as Adventus series of Wonder Floor/ Armstrong/ Responsive SPICS RQ brand or as approved by EIC conforming to IS standards in roll form fixed with suitable adhesive and joints thermo-welded to form seam less surface including cted Place, including removing of existing PVC Flooring and deposited the same as directed lace, cleaning of surface and preparation of surface to recieve the floor, filling of minor pits/ holes if any width birla putty/ cement mortar etc including cost of all material, labour, cutting wastages, T&P etc. complete all as required and directed by EIC.

Providing and fixing tiled false ceiling of approved make Armstrong/ Knauff or as approved by EIC of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24 x 24 x 0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by EIC, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Demolishing cement concrete of any description manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.-Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Dismantling old plaster or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and curing and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of any description including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD and as directed by Engineer in charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : Of area 3 sq. metres and below including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : of area beyond 3 sq. metres including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Making the opening in brick masonry for door/ window/ clerestory window including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of malba/ rubbish to dumping ground, including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Dismantling roofing Asbestos Cement sheet including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead and depositing to Civil Factory store including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Total (A)

Above