GE (N) P/TOKEN- 41 OF 2020-2021PROVISION OF CERTAIN LBW, RW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Amount

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exc.1.5 m in depthfor foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 150m and not exc.250metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 250m and not exc.500metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for moorum/ red bazri filling under floors with moorum brought from outside MD land, laid in layers n. exc 15 cm thick spread, levelled and rammed including watering etc complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in lintels upto 1.5m clear span, seismic and other similar bands, cills, plinth courses, roof kerbs, parapets, coping, benching, coping, hold fast blocks, bed blocks/ bed plates, kerbs for interlocking tiles etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified and as directed.

Material and labour for precast solid cement concrete block masonry exc.10cm width using solid blocks of PCC design mix grade C5 set in cement mortar (1:6) complete all as specified and directed.

Material and labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in chajjas complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.50m span complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in columns, pillars, piers,posts and struts complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any ) of foundation and plinth beam and similar works, vertical or batter etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves, bands, including supports, overhangs, etc. for fair finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to sides of pillars, posts, struts, columns and stanchions, square, rectungular or polygonal for fair finished flat surfaces of concrete complete all as specified and as directed.

Supply and fix for 2nd class hard wood boarding, 20mm thick, planed one side with butt joints and fixed with nails in any situation as in eaves board/ fascia of roof complete all as specified and as directed.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single executed process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply and fix for 100mm size stainless steel butt hinges fixed with stainless steel screws complete all as specified and as directed.

Supply and fix in repairs, 20mm bore aluminium powder coated fancy type curtain rod decorative type complete all as specified and as directed.

Supply and fix in repairs, aluminium powder coated fancy type decorative funnel/ brackets suitable for 20 mm dia curtain rod fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

Supply and fix in reapir tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges including brackets with brass screws and wooden plugs complete all as specified and as directed.

Supply and fix for floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring, overall length of cover plate 150mm with vulcanized rubber piece all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars, 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed.

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including applying one coat of red oxide primer complete all as specified and as directed.

Supply and fix for pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix for aluminium anodised louvered ventilator with adjustable louvers using standard aluminium section as specified including glass 4mm thick frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix (Except sheeting) for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Material and labour for Roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

M&L for Roof tiles (Except tiles) Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled shall be re-used.)

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) etc including dismantling of tiles complete all as specified and as directed.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed. Make: Action tesa, Century, Kitply

Material and labour for 4mm thick asbestos cement designed building boards as in false ceiling on and including aluminium snap grid work 60 cm x 60 cm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5mm x 23.5mm x 1.28 mm cross tee and 25mm x 25mm x 1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, size of grid shall be 610mm x 610mm including preparation of surfaces and applying two coats of dry distemper complete all as specified and as directed.

Supply and fix for tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x 3600mm, cross "T" of size 24x25x0.3x 1200mm, secondary cross "T" of size 24x25x0.3x 600mm and PPGI wall angle of size 24x24x0.4x 3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x 3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc ® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints.

The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall/ hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways as per site requirement. 24x25x0.3x 1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x 600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge Gyproc Polyshield Gypsum tile of size 595x595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid including making niches for fans/ light complete all as specified and as directed. Make: Gyproc-Saint Gobain of equivalent or Armstrong, Diaken, New Age (ACE) as approved by GE.

M&L for 27mm to 30mm thick, rough dressed Shahabad stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3, laid over and including screed bed 15mm thick in cement mortar (1:4), complete all as specified and as directed.

Material and labour for hand cut kota stone slab 20 to 25mm thick in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including screed bed 20mm thick in cement mortar (1:6), including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for hand cut kota stone slab 20 to 25mm thick as in vertical surface such as skirting and dado, jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including backing coat of 10mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection, floor, hardstanding, courtyard, laid in alternate bays not exc. 3.0m, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for roughing surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.00 kg of cement per Sqm complete all as per specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11sq.m but not exceeding 0.18sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured interlocking tiles, paver block, glossy, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Material and labour for coloured chequered cement concrete tiles of size 30cmx30cmx25mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured glossy chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces and provn of sagol finish complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement with sponge finish complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for complete removal of existing finish /treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc. and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for appying 2mm thick white cementitious wall care fine putty on walls, filling cracks by crack filler and smoothen surface with sand paper complete all as specified and as directed.

Material and labour for appying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for appying one coat of acrylic distemper of approved tint on wall surfaces complete all as specified and as directed.

M&L for one subsequent coat of acrcylic distemper on wall surfaces complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ emulsion distemper over a coat of priming paint complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

M & L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified and as directed.

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix bib tap for 15mm bore pipe, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix pillars tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. Make: Jaquar, Prayag

Supply and fix in repair stop valves for 15mm bore pipe, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix for hand shower chromium plated (health faucet), 8mm bore 1 metre long easy flex tube in chrome finish & wall hook, Cat No. ALD-565 of make Jaquar or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for grating doom round 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as drected.

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as drected.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal with access door for 75mm bore pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) junction double (double T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix for PVC (SWR) junction double (double T) equal or unequal for 75 mm bore pipes complete all as specified and as directed.

Supply and fix for PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Supply and fix for PVC (SWR) floor/ nahani trap 75 mm dia of outlet, plain with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Material and labour for PCC (1:4:8) type D2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe all as specified and as directed.

Material and labour for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Supply and fix for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with CI 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete and PVC high level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. including making good to floor complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix vitreous China half stall type, white bowl urinal flat back, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, including 5 ltrs capacity PVC automatic flushing cistern with brackets, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix for vitreous chinaware wash hand basin, white, flat back, size 550x400 mm, including cutting for and pinning in ends of and including brackets or erecting stand and waste pipe 32 mm dia of required length and all necessary inlet outlet connections complete all as specified and as directed.

Supply and fix for vitreous chinaware wash hand basin full pedestal, white, flat back, size 560x430x195mm, wall hung basin with fixing accessories set, CP brass waste coupling, chain and plug and porcelain stopper, waste fittings, union and waste pipe 32 mm dia of required length, 15mm dia PVC connection 450mm long including PTMT nuts and all necessary inlet outlet connections (excluding tap) complete all as specified and as directed. Make: Jaquar cat part No. CNS-WHT-811 (basin), CNS-WHT-303 (pedestal), or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repair brass chromium plated fancy type shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Dismantling of stone slabs and chequered tiles of any description or thickness in floor, apron etc., laid bedded and pointed in any mortar complete all as directed.

Dismantling timber scantlings, unframed work, 40 sq. cm and over in section, in any position complete all as directed.

Dismantling wooden boarding/ plywood of any description and any thickness including fillets fixed in any position with nails complete all as directed.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets spaced exceeding 15cm complete all as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness sheets including Nainital or similar pattern roof coverings complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.128 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.128 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.128 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.128 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type electronic fan regulator flush type 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Supply and fix for energy saving new generation 10 watts LED bulk head fitting IP-65 luminaire with opal diffuser prewired and necessary mounting arrangements, provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose with LED bulb all as per Cat No.BIBWP 10W LED of make Bajaj/ Philips Cat Part No WT140LED 7SCW PSU or its equvalent in Wipro/ Havells complete all as specified and as directed.

Supply and fix for wall mounted LED 18 watts with lumens out put not less than 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BLRB-DB118 & BLRB 18W CWc of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

Supply and fixing of exhaust fan plastic body of 250mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat Part No. Ventil Air DX White or equivalent of Cromptoon, Havells

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

J P ASSOCIATES

M/s.BAJRANG CONSTRUCTION