Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-AOC Accepted Being L1 | |
| 2 | L2₹5.6 L+₹93,245 (19.9%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L2 | Rejected-Finance Other Than L1 | |
| 3 | L3₹5.7 L+₹1.0 L (21.6%)Rejected-Finance GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L3 | Rejected-Finance Other Than L1 | |
| 4 | L4₹5.7 L+₹1.0 L (22.1%)Rejected-Finance WATHORA CHADOORA DISTT BUDGAM KASHMIR 191113 J K | CHADOORA | BUDGAM | JAMMU AND KASHMIR | 191113 | L4 | Rejected-Finance Other Than L1 | |
| 5 | L5₹5.7 L+₹1.1 L (22.4%)Rejected-Finance | L5 | Rejected-Finance Other Than L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
2 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
REPAIR AND MAINT TO COMPOUND WALL, HARD STANDING, FENCING, ETC AND OTHER CONNECTED B/R WORKS AT HQ CIF (K) UNDER AGE (I) CIF (K)
2022_MES_521912_1
CA NO. AGE (I) CIF (K)- 15/2022-23
Open Tender
Civil Works
Item Rate
180 days
SHALATENG
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹20,000
Yes
7 Jun 2022
5 May 2022
4 Jun 2022
5 May 2022
2 Jun 2022
19 May 2022
60 days
Amount
Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete, 1:4:8, type D-2 using 40mm graded crushed stone aggregate, 100mm thick, as in sub-base of floor/path, sub base etc. finishing surfaces even and rough to receive topping layer, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete, 1:4:8, type D-2 using 40mm graded crushed stone aggregate, 50mm thick, as in floor/path laid in panels etc. rough finished, finishing surfaces even and rough to receive topping layer, complete all as specified and as directed by the Engineer-in-Charge.
Chequered cement concrete coloured tiles of size 20 cm x 20 cm x 25mm thick set, jointed and pointed in neat cement slurry in floors,with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50 metres clear span, steps, seismic and other similar bands, coping, bed plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge.
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.
Description all as per serial item No 8 here-in-before, but except bricks complete all as specified and as directed by the Engineer-in-Charge. Note:- serviceable bricks retrived from item No. 7 here-in-before shall be used.
Taking down cement plaster, of any description on brick or stone or cement concrete walls/ceiling including raking out joints, hacking for key, scrubbing down with water, complete all as specified and as directed by the Engineer-in-Charge.
Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6, finishing surfaces fair and even, complete all as specified and directed by the Engineer-in-Charge.
Providing Precast cement concrete type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate, as in louvers and jallies, 25mm thick (measured solid) including all mouldings, set in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed by the Engineer-in-Charge.
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brickwork, masonry etc., complete all as specified and as directed by the Engineer-in-Charge.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out and removing surplus soil to a distance n.exc. 50m and making good surface in soft/ loose soil , complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified as directed by the Engineer-in-Charge.
Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified as directed by the Engineer-in-Charge.
TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified as directed by the Engineer-in-Charge.
Mild steel screw bolts (machine made) dia of neck 12mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm not exceeding 15cm long, complete all as specified as directed by the Engineer-in-Charge.
Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., fixed in repairs, complete all as specified as directed by the Engineer-in-Charge. Note:- Each line wire to be measured seperately
Restraining resecuring including making good staples etc.Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified as directed by the Engineer-in-Charge. Note:- Each line wire to be measured seperately
Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed.
Note :- An amount of Rs. 9,632.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S SHEIKH FEROOZ AHMAD
JK BUILDERS AND ENGINEERS
M/S ADIL CONSTRUCTIONS
M/S RAFIQ AHMAD SOFI AND SONS
M/s Hassaan Constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .