Providing And Fixing Green Gym, Play Equipment And Multy Play System For Development of Garden on Open Space at Chitanvis Lay Out, Byramji Town, Mauza Jaripatka, Nagpur.

Air Walker/Storm Rambler • AREA: - 1.06Mtr x 0.81Mtr. • SAFE AREA: - 1.72Mtr x 1.06Mtr. • Providing and fixing Air Walker made from “C” class G.I. Pipe. • The main frame of Ø60mm made from “C” Class G.I. pipe, and • The bottom support of M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom • The leg movement frame is of Ø40mm made from “C” Class G.I. pipe • The handle frame is of Ø32mm made from “C” Class G.I. pipe. • The foundation used for fixing is consists of three equal items i.e. 90mmmade from “C” Class G.I. pipe, M.S. Round Plate of Ø250 mm & 10mmthickness & 25 mm X 25mm M.S. angle of 3 mm thickness. • The footrests is made from FRP/C.I./Aluminum casting material, its sizes are130mm X 310mm X 5mm.For the support 50 X 50mm X 2mm CRC square pipe is used. • Closing Caps made from top quality FRP material with 2 mm thickness. • The pins used are made up of Ø 25mm bright bar. • The bearings used are “6205zz” permanent lubricated sealed bearing of reputed make (SKF/FAG). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly are of Ø25 mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70micron thickness.

Chest Press • AREA: - 0.71Mtr x 1.72Mtr. • SAFE AREA: - 0.86Mtr x 2.48Mtr.• Providing and fixing chest press made from “C” Class G.I. pipe. • The center pipe is of Ø115mm made from “C” Class G.I. pipe, and • The bottom support of M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom. • The remaining frame is made up of Ø40mm“C” class G.I. pipe. • The handle frame is made up of Ø32mm “C” class G.I. pipe. • For the assembly different bushes are used which is made from 50mm with 3mm thickness seamless pipe & 50mm solid bar is used. • The foundation used for fixing is consists of three equal items i.e. Ø115mm made from “C” Class G.I. pipe, M.S. Round plate of Ø250 mm & 10mm thickness & 25 mm X 25mm X 3mm M.S. angle. • The seats is fitted on the outer frame is made up of high quality FRP material of size 330 mm X300 mm of thickness 3 mm & M.S. Plate of thickness 5 mm and Size 250 mm X 200 mm is used to Support it • Closing Caps are made from top quality FRP material which is of 2 mm thickness. • The pins used are made up of Ø25 mm & Ø17mm solid bar. • The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly is made up of Ø25 mm& Ø17mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

Rower • Area:- 1.2 x 1Mtr. • Safe Area:- 1.5 x 1.5Mtr. • Providing and fixing rower made from “C” Class G.I. Pipe. • The Main frame is of 80mm X 40mm& 40mm X 40mm CRC Pipe with 2 mm thickness. • The handle frame is of Ø32made from “C” class G.I. pipe. • The Foundation used for Fixing consists of three equal items i.e. Ø40mm made from “C” Class G.I. pipe, C channel of 75mm X 40mm X5mm & 25mm X 25mm X 3mm M.S. angle • To join the movement frame to main frame seamless pipe of Ø50mm & 3mm thicknesses used. • The seats which are fitted on the main frame is made up of high quality FRP material of size 330mm X 300mm of thickness 3 mm & M.S. plate of size 250mm X 200mm X 5mm issued to support it. • Closing caps are made from top quality FRP material which is of 2 mm thickness. • The pins used are made up of Ø17mm hardened bright bar • The bearings used are of “6203zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The handles used are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The bushes (Stopper) used to avoid the collusion • The serclips used for assembly is of Ø17 mm. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness.

Seating & Standing Twister • AREA: - 1.7 x 0.66Mtr .• SAFE AREA: - 2 x 1Mtr. • Providing and fixing Seating & Standing Twister made from “C” Class Galvanized Iron (G.I.) Pipe. • The Center Pipe is of Ø100mm made from “C” Class G.I. Round Pipe, and• The bottom support of M.S. round plate of Ø250 mm& 10mm thickness is welded at bottom. • The standing frame of the Seating& Standing twister is of Ø40mm, Ø60mm, andØ50mm made from “C” class G.I. pipe. • The handle frame of Seating & Standing twister is Ø32 mm & Foot resting frame of seating side is made from “C” class G.I. pipe of Ø25mm & Ø 32mm. • The seamless pipe is used for joining the centre pipe frame& handle frame is made from Ø130mm with 3mm thickness. • The foundation used for fixing is consists of three equal items i.e. Ø 90mm made from “C” class G.I. pipe, M.S. round plate of Ø250 mm & 10mm thickness & 25 mm X 25mmX 3mm M.S. angle. • The standing plate is fitted on the standing frame is made up of Ø 100mm seamless pipe& Seating plate is fitted on the frame is made up of Ø 60mm seamless pipe. Ø300mm x10mmThikness M.S. Round Plate. • Closing caps made from top quality FRP material which is of 2 mm thickness. • The Pins used are made up of Ø 25 mm bright bar. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly.

Shoulder Builder/Hand Roller • Area:- Ø0.89Mtr. • Safe Area:- Ø1.5Mtr. • Providing and fixing Shoulder Builder made from “C” Class G.I. pipe. • The Center Pipe is of Ø 115mm made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. • The handle movement frame is of Ø32mm & Ø25mm made from “C” Class G.I. pipe. • To Join the centre pipe & handle movement frame seamless pipe of Ø 130mm &3mm thickness is used. • The foundation used for fixing consists of three equal items i.e. Ø 90mm made from “C” class G.I. Pipe, M.S. Round Plate of Ø 250 mm & 10mm thickness & 25 mm X 25mm X3mm M.S. angle. • Closing caps made from top quality FRP material which is of 2 mm thickness. • The pins used are made up of Ø 25 mm bright bar. • The bearing used is “6201zz”& “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly is of Ø 25 mm. • The Poly Urethane plastic bush is used for handling. • The powder coat is done by Poly urethane& Epoxy powder with 60 to 70 micron thickness

Sit Up Board/Seated Panel • Area:-0.50 x 1.70 Mtr. • Safe Area:- 0.86 x 2 Mtr. • Providing and fixing Sit up Board made from “C” Class G.I. pipe. • The main frame is of Ø40mm & Ø32mm made from “C” Class G.I. pipe. • Perforated sheet of 1.5mm thickness is welded on 25 x3mm thick flat Patti on main frame. • The base side of the sit up board is made of 50 x 20 mm CRC pipe. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70 micron thickness

Sky Walker • AREA: -1.72Mtr x 0.63Mtr. • SAFE AREA: - 2.54Mtr x 1Mtr. • Providing and fixing Sky Walker made from “C” • The main frame pipe is Ø80mm made from “C” Class G.I. pipe. • The outer ring of sky walker is Ø32mm made from “C” Class G.I. pipe • For connecting the handle frame to main pipe Ø60mm “C” Class G.I. pipe is used. • The bottom support of M.S. round plate of Ø250 mm x 10mm thickness is welded at bottom. • The leg movement frame is of 50 x 50mm x 2mm thick CRC square pipe. • The handle frame is of Ø40mm made from “C” Class G.I. pipe. • The foundation used for fixing is 80 x 40mm x 3mm thickn • The footrests is made from Aluminum casting material, its sizes are 130 X 310 X5mm • Closing Caps made from top quality FRP material with 2 mm thickness & Plastic cap are used. • The pins used are made up of Ø 25mm bright bar. • The bearings used are “6205zz”& “6203zz” permanent lubricated sealed bearing of reputed make (SKF/FAG). • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly are of Ø25 mm. • The powder coat is done by Poly urethane& Epoxy powder with 60 to 70 micron thickness.

Surf Board/Wave Panel • Area:- 0.91 x 0.86Mtr. • Safe Area:- 1.39 x 1.27Mtr. • Providing and fixing Surf Board made from “C” Class G.I. pipe. • The center pipe is of Ø115mm made from “C” class G.I. pipe, and • The bottom support of M.S. plate of Ø 250 mm & 10mm thickness is welded at bottom. • The handle frame is of Ø 40mm made from “C” class G.I. pipe • The foundation used for fixing consists of three equal items i.e. Ø 90mmmade G.I. pipe, M.S. round plate of Ø250 mm & 10mmthickness, 25mm X 25mm X 3mm M.S. angle. • To join the centre pipe& handle frame seamless pipe of Ø130mm & 3mmthickness is used. • For the movement, bushes are used Ø60mm with 3mm thickness &Ø60mm • The footrests is made from Aluminum casting material, its sizes are 320 mm X 270 mm & 5 mm thickness. • For support of footrest is 200mm X 250mm with 5mm thickness M.S. Plate and 50mm X 50mm CRC Square pipe with 2mm thickness is used. • Closing Caps made from top quality FRP material which is of 2 mm thickness. • The pins used are made up of Ø25 mm bright bar. • The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The handles used are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The bushes (Stopper) used to avoid the collusion made from Poly Urethane Plastic material of Ø 50 mm. • The serclips used for assembly is of Ø25 mm. • The powder coat is done by Poly urethane& Epoxy powder with 60 to 70micron thickness.

Leg Press • Area:- 0.40 x 1.77 • Safe Area:- 1 x 2.38Mtr. • Providing and fixing Leg Press made from “C” Class G.I. Pipe • The center pipe is of Ø115mm made from “C” Class G.I. • The bottom support of M.S Round plate of Ø250mm & 19 MM thickness is welded • The remaining outer frame of Ø40mm made from “C” class G.I pipe. • The foundation used for fixing is consist of three equal item i.eØ80mm made from “C” class G.I. pipe, M.S. Round plate of Ø250mm& 10mm thickness, 25 mm X 25mm x3mm M.S angle. • To join the centre pipe &outer frame seamless pipe of Ø120 mm &3mm thickness is used. • The seats are fitted on the outer frame is made up of FRP material of size 330 mm X 300 mm of thickness 3 mm & M.S. Plate ofmm and Size 250 mm X 200 mm thickness 5. mm and Size 250 mm X 200 mm is used to support it. • The footrests is made from Aluminum casting material, its sizes are130 mm X 310 mm & 5 mm thickness. • The frame of footrests consists of Ø32mm made from “C” class G.I. pipe • Closing caps made from top quality FRP material which is of 2 mm thickness. • The inner bushes is made from seamless pipe, its diameter is 60 mm & 5 mm thickness. • The pins used in are made up of Ø25 mm hardened bright bar. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed make (FAG/SKF). • The handles used are of Rubber grip. • High tensile steel with galvanized nut bolts are used for assembly. • The serclips used for assembly are of Ø25 mm. • The powder coat is done by Poly rethane & Epoxy powder with 60 to 70 micron thickness.

Bench Panel (Pommel Horse) • AREA: - 2.05Mtr x 0.6Mtr. • SAFE AREA: - 4Mtr x 1Mtr. • Providing and fixing Bench Panel made from “C” class G.I. Pipe. • The main frame of Ø80mm, Ø60mm made from “C” Class G.I. pipe, and • The bottom support of M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom. • The handle frame is of Ø32mm made from “C” Class G.I. pipe. • The foundation used for fixing is consists of three equal items i.e. Ø90mmmade from “C” Class G.I. pipe, M.S. Round Plate of Ø250 mm & 10mmthickness & 25 mm X 25mm M.S. angle of 3 mm thickness. • Ø32mm “C” Class G.I. pipe is placed on the frame Ø60mm made from “C” Class G.I. pipe. 60 x 10m thickness flat is used for supporting for it. • Closing Caps made from top quality FRP material with 2 mm thickness. • High tensile steel with galvanized nut bolts are used for assembly. • The powder coat is done by Poly urethane & Epoxy powder with 60 to 70micron thickness.

Handling Cycle Cycle is the most common exercise equipment since from last many years. Including full lower part of body from feet, calf, knees, thies, waist and half abdominal it is the most effective equipment for building up the stamina, warm up and stretching full lower part of the body. Detail of pipe sizes: • Main frame 114mm “C” class (2.5mm thickness) • Upper frame 50mm “C” class (2.5mm thickness) • Horizontal support 40mm “C” class (2.5mm thickness) • Handles 30mm “C” class (2.5mm thickness) • Wheels heavy duly M.S plate. • Revolving paddles. • Permanent lubricated sealed bearing of reputed brand • Nuts & Bolts Galvanized. • Nylon covers for covering the Nuts & Bolt.

Shoulder Shaper (Single User) Out of all the best equipments, Pull chair is widely used in for building up the strength of shoulder muscle group and upper limbs. These fitness equipments are beneficial in improving the mobility, flexibility and coordination of ankle & shoulder joints. People with joint ache in limbs, functional disorder in bending and motion discomfort are advised to use this fitness equipment. Detail of pipe sizes: • Central main pipe 114mm “C” class (2.5mm thickness). • Sitting pipe 40mm “C” class (2.5mm thickness). • Both side vertical structure pipe 40mm. • Seat metallic sheet 3mm M.S. • Seat moving pipe 2”x2” square M.S. • Upper Handle pipe 40mm. • Grip Handle 25mm. • Permanent lubricated sealed bearing of reputed brand. • Nuts & Bolts Galvanized. • Nylon covers for covering the Nuts & Bolt.

Multi Functional Trainer (Single User) Machine part description:- • Mounting Plate • Cap • Handle connecting pipe 1 • Connecting pipe 1 • Center pillar • Holding pipe 1 • Holding pipe 2 • Movable pipe • Square pipes • Stepping plates • Stepper base • Standing plate • Center pipe • Mounting Plate 2 • Handle connecting pipe 2 • Nylon pad • Hinged pipe 1 •Hinged pipe 2

Cross Trainer Among all other outdoor fitness equipments, Elliptical Trainer gives people an excellent way of easy workout. These equipments are designed for developing and strengthening the cardiac functions and whole body joints, at the end resulting in a perfect shaped figure. In this trainer. Detail of pipe sizes: •Main frame 80mm “C” class (2.5mm thickness). • Bottom main frame 114mm “C” class (2.5mm thickness). • Handles 40mm “C” class (2.5mm thickness). • Grips 32mm “C” class (2.5mm thickness). • Footrest M.S checked plate 4mm thickness. • Movement pipe 2” square M.S • Permanent lubricated sealed bearing of reputed brand. • Nuts & Bolts Galvanized. • Nylon covers for covering the Nuts & Bolt.

Play Equipment Merry Go Round Animal :- Providing and fixing Merry Go Round Animal A] Its area shall be 1.5 m diameter with height of 1 mtr .B] 4 numbers of rotomouilded plastic ducks shall be used of width 330 mm, length 630 mm, with base thickness of 20 mm. C] Foot rest shall be made of 12 mm bridge rod fabricated at specific angle 25 mm x 5 mm MS flat to give footrest. D] Main frame shall be consisting of 4 no arms made of 40 mm NB and 25 NB ‘B’ class GI pipe with base plate 200 mm dia MS circle. E] Bearings shall be of dual heavy duty SKF or equivalent ball and thrust bearings, permanently press fitted with lubricant and with water sealant on both sides. F] Stand shall be made of 80 mm NB ‘A’ class GI pipe with cross angles at bottom and bearing mounting 200 mm dia MS plate at top. G] Painting is done by spraying after proper surface treatment and an initial coat of yellow primer surface is applied before the top coat. The top ; coat is done using the best quality brand with coating of 50 microns.

Two seat swing :- providing and fabricating and erecting Two Seat swing composed of to Horizontal ISI mark 50 mm NB G.I. Pipe of 3.0 m in length, vertical inclined G.I. Round Pipe 40 mm NB ISI mark 4nos (2.90 mtr length per No) for leg support and bracing pipe 40 mm NB G.I. Pipe 2 nos. (0.40 m per no) and inclined pipe shall be fixed firmly to top horizontal pipe, leg pipe shall be embedded with hold fast in C.C. bloc (1:2:4 mix) of size 0.45 x 0.45 x 0.45 m and two heavy duty ball bearing assembly for swinging with G.I. chain 8 mm, 4 nos. (2.30 m length per no.)Embedded with hold fast in C.C. bloc (1:2:4 mix) of size 0.45 x 0.45 x 0.45 0.45m and two heavy duty ball bearing assembly for swinging with G.I. chain 8 mm, 4 nos. (2.30m length per no.) and Aluminum chequred sheet 3 mm thick size 0.45 x 0.30mtr per sheet fixed on 15 mm NB G.I. ISI Pipe frame and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete as per design and drawing.

Multi Sweater See – Saw :– Providing and fixing multi sweater see – saw A] It shall be made of 80 mm NB GI pipe for lever and 2 nos. column stand shall be of 80 mm NB ‘A’ class GI pipe. And horizontal pipe shall be of 50 mm NB ‘B’ class GI pipe for column stand and other horizontal pipe shall be of 25 mm.B] MS plate shall be of 150 mm x 150 mm with 5 mm thickness attached with bush bearing fixed with nut bolt (4nos. GI ) between horizontal and vertical pipe.C] The handle shall be of 25 mm NB GI pipe. The height of the see saw shall be 0.5 m from ground level. 4 nos. seats shall be of moulded plastic or FRP.D] Painting is done by spraying after proper surface treatment and an initial coat of yellow primer surface is applied before the top coat. The top : coat is done using the best quality brand with coating of 50 microns.

Spiral Slide :- Providing and fabricating and erecting spiral slide with ISI mark G.I. Pipe the assembly constitutes of the following. (a) The sliding chute shall be made up of fiber reinforced plastic (FRP) type moulded one and shall be painted with attractive colours and shade, minimum joints shall be provided for FRP spiral slide. The design of spiral is such that the children would not fall down while sliding in rotation towards down slide. The FRP slide shall be of 6 mm thick and should be finished both side with specialty designed horizontal landing where the child is not going to got hurt. (b) Platform height 3.0mtr. of aluminum chequred plate 3 mm thick with railing shall be made up of FRP with safe railing having 20 NB GI pipe for grip, with a height of 500 mm as recommended in the international safety standards. (c) Central support pipe shall be made up of 75 NB G.I ISI mark pipe with suitable arrangement. (length 4.0 m) (d) Ladder, Railing and steps made up of 20 mm NB G.I. pipe with steps for ladder 12 Nos. (length 0.4 m) (e) Platform support pipe shall be made of 40 mm NB G.I. pipe 2nos of (3.5 m per no) G.I. pipe with proper foundation arrangement. The sate play area shall be a minimum of 3.5mtrs x 2.8mtrs. the painting shall be of required quality and support pipe are embedded in C.C. (1:2:4) mix of size 0.45 x 0.45 x 0.50 m and one coat of anticorrosive paint over it two coats of oil painting of approved quality and shade etc. complete as per design and drawing. All pipes are G.I. ISI ‘B’ class.

Tube Slide :- Providing fabricating & erecting Tube Slide of platform height 1.5 m composed of 40 mm NB GI ISI mark 2 nos. (2.1 m length per no) for platform 20 mm NB GI ISI mark pipe of total length 23mtr. includes for Ladder slant 2 nos. (2.25 m Length per no) Steps 7 nos. (0.40 m per nos) Railing 2 nos. (2.0 m length per no) Bracing’s 4 nos. (0.2mtr length per no) and for platform 4 nos. (0.45 m length per no) 4 nos. (0.5mtr length per no) and for support 6nos (1.3 m length per no) and sliding chute in tubular shape shall be made up of fiber glass reinforced plastic ( FRP) 5 mm thick molded both side finish shall be with attractive colour a shade with Translucent dia 0.75 m and Translucent length 3.8 m with aluminum chequered plate 3 mm thick of size (0.5 x .04 m) all railing and support pipes are embedded in C.C. blocks M 15 (1:2:4) grade of size 0.30 x 0.30 x 0.50 m and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete as per detail design and drawing. All pipes are G.I. ‘B’ class ISI mark.

Simple Side (Stainless Steel Chute) :- Providing fabricating and erecting Simple Slide composed 40 NB G.I. ISI mark 2 Nos. (3.00 length per no) for supporting plat form, 20 N.B. G.I. pipe for ladder slant 2 Nos. (3 m length per no) steps 11 Nos. (0.40 m per no) Railing 2 Nos. (2.70 m per No) bracing 4 Nos. (0.20 m per no) and vertical 20 mm NB G.I. pipe for hand rest at platform level 4 Nos. (0.45 m per No) and 4 Nos. horizontal (0.50 m per no) and for slide chute slant 2 nos. (4.30 m per no) and for middle vertical support of slide chute 2 nos. (1.30 m per no) and end of chute vertical supports 4nos (0.9 m per no) also MS angle 40 x 40 x5 mm as a stiffener below chute and along edges length wise ( length 10.4mtr.) Railing and support pipe embedded in Cement Concrete bloc (1:2:4 mix) of size 0.45 x 0.45 x 0.45mtr and 18 gauge stainless steel sheet for slide chute (4.30m x 0.45mtr) and Aluminum chequred sheet 3 mm thick fixed on ISA 40 x 40 x 5 mm thick for platform size (0.50 m x 0.45 m) and one coat of anticorrosive paint and over it two coat of oil painting of approved quality and shade etc. complete. As per detail design and drawing.All pipes are G.I. ‘B’ class ISI mark.

MULTI-PLAY SYSTEM Suv Size 6.09 X5.7 X 3.04 MTR Providing fixing & commissioning with including transport Replay Brand multi-play system and Specification given below Structure structure pipe are made up of G.1. 8 Class Pipes 100 mm NB confirming to ISI 1239 2004Handrail, ladder, Climber: The handrail, ladder and climber manufactured of 28 mm to 32 mm OD NB confirming to 15 1239 2004 Pustic parts: like canopy, slide, panel beach are made up of Virgin LLDPE Parts, it should be higher tensile strength. cracking resistance and non toxic plastic Also used HOPE Panels, Graphic Stickers, and Acrylic Panel Deck Deck should be triangular and square shape are fabricated from 2 mm thick punched still. Hardware High tensile steel & galvanized Nut bolts are used for assembly Welding thickness Mig Welding 5 to 3 mm And Are Welding 1.5 to 5 mm Cobur all metal component are PU paint over two coat of Epoxy primer are free to edges and excess weld splatter and clean epoxy primer to prevent flash rusting before coating

Animal shape Dust Bin (FRP) :- Providing and fixing Penguin / Rabbit shape dust bin of size 2 feet diameter 3.5 feet height made out of animal shape Fiber Reinforcement Plastic structure of 5 mm thick in two colours well finished and smoothened with a door for opening on back side as per drawing and painting in attractive colour combination in synthetic enamels paint.

Providing fabricating and erecting C.I. Benches of 1.5m length fabricated with 40 x 20 mm M.S hollow pipe ( 16 guage) 5 Nos. for seat framed 1.5m length and 40x 20 mm M.S. hollow pipe (16 guage) 5 Nos for back framer ( 1.5 length) at equal spacing Handest & footerst complete casr iron mounlded pandel ( Wt. 17 Kg apprx per panel ) & one coat primer & two coat oil pant Best Quality etc. Benche Size 1.5m x 0.45 x 0.45m back support ht 0.45 As per photo grophs and deciom etc. comm