Loading…
Loading…
Tender Value
₹10.0 L
EMD Value
₹19,980
Closing Date
8 Oct 2026, 11:00 am
The Assistant Engineer Uluberia Sub Div,PHE Dte
BAGNAN, KHADINAN, HOWRAH-711303
Construction of approach road with Eucalyptus Bullah piling and necessary protection and land developing work of proposed additional tubewell site (Village- Bankura) under Sardah PWSS of Amta-II Block in Uluberia Sub-Division, under Howrah Div PHE
2026_PHED_5075047_1
WBPHED/AE/USD/NIET-11(2nd Call) OF 2026-2027
Open Tender
CIVIL WORKS
Percentage
60 days
Bagnan, Khadinan
Please refer Tender documents.
5 documents required · 5 mandatory
₹19,980
24 Sept 2026
24 Sept 2026
10 Oct 2026
24 Sept 2026
8 Oct 2026
24 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying Jhaw/ Eucalyptus bullah piles at work site, including dressing and making one end pointed. (iii) 15 cm av. diameter. Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end. | 1,835 | mtr | 217 | ₹3,98,195 |
| 2 | labour for driving Jhaw/ Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position , portecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for neessary driving appliances and all tackles.(iii) 15 cm av. diameter. Note: 1) Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. 2) For string staging under specific instruction of Engineer-in-charge or for driving from pontoon or boats, the rate will be enhanced by 4.00 per meter. 3) For driving done by pile engine set (without staging under specific instruction of Engineer-incharge, the rates will be enhanced by 4.00 per meter. | 1,394.6 | mtr | 105 | ₹1,46,433 |
| 3 | Supplying , fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. a) Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus. (i) Jhaw / Eucalyptus | 127.6 | mtr | 104 | ₹13,270.4 |
| 4 | Fitting, fixing bitumen drum sheet to bullah pilling and wailing piesces including cutting straightening drum sheet fixing with countrsy nails @20 cm c/c at top & bottom and bolts & nuts at top & bottom at every joint of drum sheet with a laping of 15 cm, including supply of drum sheet, fixture all complete as per direction of the Engineer-in-charge | 12 | Sqm | 437 | ₹5,244 |
| 5 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Enginner in Charge. B) Two coats. | 115.6 | Sqm | 55 | ₹6,358 |
| 6 | Supplying Nylon cage neeting 1 meter x 1 meter x 1 meter size with knot having mesh size 17.5 cm x17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg/ sqcm including carriage , delivery and stacking at site inclusive of all taxes complete | 115.6 | Each | 117 | ₹13,525.2 |
| 7 | Supplying at site High Density Polyethylene (HDPE) bag of size 0.84 m x 0.38 m conforming to BIS : 14252 : 2015 for bank protective works including all cost of cost of transportation on road by all means,including other incidental charges complete. Note: Payment will be made subject to the result of 3rd Party Testing, to be done by the Engineer-in-charge departmentally. Paragraphs 2.8 including the sub-paragraphs, i.e. 2.8.1 and 2.8.2 under the Chapter of “Specification for Works” in the USoR shall be reproduced and included in the tender document as “Specification and Special Terms & Conditions for High Density Polyethylene (HDPE) Bags” in case of use of this item in the estimate.” | 2,976 | Each | 22 | ₹65,472 |
| 8 | Labour charges for filling HDPE bags with filler materials (earth/sand), machine stitching the open end of the bag with thread as per design and placing the same on slope or dumping from bank within initial lead of 30m and all lifts including carriage and hire charges of all materials and equipments but excluding the cost of filler materials as directed by Engineer-in-Charge (Volume of earth/sand filled bag should not be less than 0.0328 cum) | 2,976 | Each | 12 | ₹35,712 |
| 9 | Labour charges for dumping and placing in position properly filled in Nylon crates with filled in gunny/ poly cement bags ( minimum 25 nos. having capacity 50 kg) with local earth or sand,sewing and tying the crate with nylon wire within a lead of 150m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary , or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charges of filling bags with earth/ sand but excluduing cost of nylon crate as per direction of the Enginner-in- charge . NB- Volume of each earth/ sand filled bags should not be less than 0.028 m3. Size of each Nylon crate is 1 meter x 1meter x 1 meter. (a) Where boats are not necessary. | 115.6 | Each Crate | 418 | ₹48,320.8 |
| 10 | Supply to the site empty cement polythene bags (capacity 50 kg) in good condition including stacking, incedental charges etc. all complete. (capacity 50 kg) | 2,480 | Each | 6 | ₹14,880 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
ImportantDocuments.pdf
Tender Documents • 0.15 MB
WBF2911.pdf
Tender Documents • 0.50 MB
BOQ_5163889.xls
BOQ • 0.32 MB
SpecificationConstBuilding.pdf
Tender Documents • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .