RR of LWSS Bandal Kafhal in GP Bandal Kafhal Tehsil Kupvi Distt Shimla H.P

Supply, erection, testing & commissioning of horizontal spindle,horizontal split casing,radial split Single, /Multistages centrifugal pumps or combination of pumps, in series/parallel of recommended make such as Mather and Platt/Kirloskar/ Model WKFI 50/15-conforming to BIS 1520-1980 with upto date ammendments read with BIS 9137-1978 or latest edition to handel clear water having characteristics as mentioned in item No. 1 (A) as under, with impelleres, casting ring, priming funnel & shaft sleeves of bronze, shaft of steel with cast iron casting of suitable, capacity coupled directly throught a flexible coupling on a common base plate of cast iron casting of suitable ccapacity coupled directly through a flexible coupling on a common base plate of cast steel/ Mild steel to Kirlokar/ Crompton/ Marathon make slip ring/ squirrel cage screen protected drip proof induction electric motor of 75HP suitable for operation on the data given below i/c the cost all accessoreis in all lead lift & carriage of material at site as per direction of Engineer-Incharge. complete with star delta starter, electric motor of 75HP suitable for operation on the data given below i/c the cost all accessoreis in all lead lift and carriage of material at site as per direction of Engineer in charge complete with star delta starter, electrial control panel electrical cables,complete H-492Meter Q 5.00LPS Dia of Rising main-80 mm Length of Rising main:- 1300 Meter. Ist Stage (Pump WKFI 50/15-Motor 75HP)

Supply, erection, testing & commissioning of horizontal spindle,horizontal split casing,radial split Single, /Multistages centrifugal pumps or combination of pumps, in series/parallel of recommended make such as Mather and Platt/Kirloskar/ Model WKFI 40/13-conforming to BIS 1520-1980 with upto date ammendments read with BIS 9137-1978 or latest edition to handel clear water having characteristics as mentioned in item No. 1 (A) as under, with impelleres, casting ring, priming funnel & shaft sleeves of bronze, shaft of steel with cast iron casting of suitable, capacity coupled directly throught a flexible coupling on a common base plate of cast iron casting of suitable ccapacity coupled directly through a flexible coupling on a common base plate of cast steel/ Mild steel to Kirlokar/ Crompton/ Marathon make slip ring/ squirrel cage screen protected drip proof induction electric motor of 60HP suitable for operation on the data given below i/c the cost all accessoreis in all lead lift & carriage of material at site as per direction of Engineer-Incharge. complete with star delta starter, electric motor of 60HP suitable for operation on the data given below i/c the cost all accessoreis in all lead lift and carriage of material at site as per direction of Engineer in charge complete with star delta starter, electrial control panel electrical cables,complete H-392Meter Q 5.00LPS Dia of Rising main-65mm Length of Rising main:- 8500Meter. 2nd Stage(Pump WKFI 40/13-Motor 60 HP)

Laying ,jointing, with circumferential butt joints by electrical arc welding (Welding thickness shall be equal to pipe wall thickness) and testing of G.I Pipe of Jindal/Surya Roshani /Tata/AST or of approved rate contract of DGS and D / HP Govt make of following diameter confirming to IS:1239:1990 (Part-ii) (latest with up to date amendments having wall thickness as specified below capable of withstanding required test pressure , including manufacturing and fabrication of reducers taper all shorts pieces, bends etc as per site requirement made from parent tubes. The laying of pipe shall also include flanged joints duly welded in three layer (Two inner and one outer) Where ever required as per direction of Engineer in charge (Earth work in trenches and the cost of flanges I/C nut and bolts gasket will be measured and paid for separately) and all operation such as cutting welding and jointing fabrication of bends tees i.e lowering and laying in excavated trench to ensure required level including flushing cleaning and hydraulic testing complete in all respect to the entire satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Overlikon/Over cord s/s make.The damaged portion of the pipe and all specials (if damaged during laying and jointing operation of pipe ) made from the parents tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paints over a priming coat as per AWWA specification C-203-1978. The rates also includes entire carriage of material ,flushing, Cleaning and Hydraulic testing,DP test of butt welded joints complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts Ist and 2nd Stage

Please Enable Macros to View BoQ information