Renovation of IEI to Type-V Qtr. No. G-56 A near CAT building under Section-V of Electrical Sub-Division, Workshop Division, APWD, Port Blair

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable modular Plastic Surface Box (Make: Legrand, Model: Britzy or equivalent) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable suitable modular Plastic Surface Box (Make: Legrand, Model: Britzy or equivalent) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b)2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

d) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing the following module plastic surface box (Make: Legrand, Model: Britzy or equivalent) along with suitable modular base and cover plate(white) with frame (Make: Legrand, Model: Britzy or equivalent) for modular switches in recess etc. as required.

a) 1 module

b) 2 modules

c) 3 modules

d) 4 modules

e) 6 modules

f) 12 modules

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 A switch

b) 15/16 A switch

c) 3 pin 5/6 A socket outlet

d) 6 pin 15/16 A socket outlet

e) Telephone socket outlet

f) TV antenna socket outlet

f) Bell push

Supplying of indoor Wall Light suitable for 1 x E27 LED lamp ( Make : Philips, Model : Roseate, Model No.: 58135 or equivalent ).

Supplying of Suspension light (Pendant) suitable for 1x E27 LED lamp ( Make : Philips, Model : Roseate, Model No.: 58137 or equivalent ).

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying of 1' , 5W Batten LED(Integrated), CDL/WW/NW ( Make: Philipsj, Model.: Astra Line or equivalent).).

Supplying of 2' , 9W Batten LED(Integrated), CDL/WW/NW ( Make: Philipsj, Model.: Astra Line or equivalent).).

Supplying of 10W LED Bulk Head with PDC housing and IP66 Protection, CDL/NW (Make:-Philips, Model : Endura, Model: WT202W LED10S CW PSU S3 PC/WT202W LED10S NW PSU S3 PC or equivalent ).

Installation ,Testing, Commissioning of all LED wall bracket /ceiling fittings of all sizes and shapes , complete with all accessories including connections etc. as required.

Supplying, installation, testing and commissioning of 45W LED Gate light with PDC (Make: Bajaj, Model: BGCTN 45W LED WH/WW or equivalent) .

Supplying and fixing following LED lamp (CDL/WW) on the existing Light Holder :

a) 5 W, E27 ( Make : Havells or equivalent )

b) 15 W, E27 ( Make : Havells or equivalent )

b) 9 W, B22 ( Make : Havells or equivalent )

Supplying and fixing Electronic Door Bell suitable for single phase, 230 V (Make: Philips, Model: Smart Harmony, Model No.: 913713825601 or equivalent ).

Supplying and fixing Bell Call Indicator 1 module ( Make: Legrand, Model : Britzy, Cat. No. 6734 07 or equivalent ) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing buzzer 230 V, 1 module ( Make: Legrand, Model : Britzy, Cat. No. 6734 40 or equivalent ) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying of LED box type batten suitable for single TLED lamp ( Make:- Philips, Type: TMC 501 P 1xT- LED 22W P3241 or equivalent) with a 18 watt LED T8 tubelamp with PC body ( Make:- Philips, Model: MAS LED tube 18W 1800lm 865 T8 or equivalent) complete with all accessories etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of 1200 mm sweep BLDC - 5 star rated, energy saving ceiling fan without remote (white colour) suitable for 230 V, 50 Hz, A.C. supply (Make: Orient, Model: Hector 500 or equivalent).

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of exhaust fan of 300mm sweep (Metallic ) (Make: Crompton, Model-Drift Air Plus or equivalent)

Supplying of exhaust fan of 250 mm. sweep (Non Metallic ) (Make: Crompton, Model-Ventilus or equivalent)

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying of wall fan of 400mm sweep (Make: Crompton, Model- High Flo Neo or equivalent).

Supplying & fixing 4 way MCB Enclosure of sheet steel, phosphatised, powder painted MCB DB with Din Rail (in accordance with IS 13032, IS 8623, IEC/BS EN 60439-3) ( Make: Havells, Cat. No. DHDEPFP or equivalent).

Supplying and fixing 25 A rating, TPN, 415 V, 10 kA, "C' curve, miniature circuit breaker suitable for inductive load of in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way (4 + 24), Double door

"Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying, installation, testing and commissioning of Instantaneous Electric Water Heater of capacity 3Ltr./3KW (Make:- Havells, Model: Instanio, Product Code: .GHWAIAPWB003 or equivalent complete with all accessories etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying of 25 sq.mm., 3.5 core XLPE insulated armoured LT power cable of 1.1kV grade with aluminium conductor(Make: Havells or equivalent).

Supplying and laying of DWC HDPE pipe of size 50/38, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC pipe as required. a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. a) Upto 35 sq. mm (clamped with 1mm thick saddle)

POWER ENGINEERING CO

M/s G K Construction

M/s Sai Electrical Works