Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAccepted-AOC ROHTAK | ROHTAK | HARYANA | 124001 | ₹1.0 Cr | L1 | Accepted-AOC acceptd |
| 2 | L2₹1.1 Cr+₹3.2 L (3.04%)Rejected-Finance NA VILLAGE SUDKAIN KALAN DISTT JIND 125116 | SUDKAIN KALAN | JIND | HARYANA | 125116 | ₹1.1 Cr+₹3.2 L (3.04%) | L2 | Rejected-Finance HIGH RATE |
| 3 | L3₹1.1 Cr+₹7.6 L (7.28%)Rejected-Finance RAM NAGAR NEW BUS STAND NARWANA 126116 | NARWANA | JIND | HARYANA | 126116 | ₹1.1 Cr+₹7.6 L (7.28%) | L3 | Rejected-Finance HIGH RATE |
| 4 | L4₹1.1 Cr+₹8.3 L (7.99%)Rejected-Finance | ₹1.1 Cr+₹8.3 L (7.99%) | L4 | Rejected-Finance HIGH RATE |
| 5 | L5₹1.2 Cr+₹15.6 L (14.9%)Rejected-Finance | ₹1.2 Cr+₹15.6 L (14.9%) | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
21 May 2020, 5:00 pmClosed
Executive Engineer,
Executive Engineer Jind W/S Division,Jind
Reconstruction of pump House at RD 0 Lijwana Pauli Link drain out falling at RD 42000 Bhiwani Sub Branch .
2020_HRY_127961_1
22/05/2020/1
Open Tender
Civil Works
Works
300 days
JInd
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,000
Executive Engineer Jind W/S Division,Jind
₹2.2 L
Yes
20 Oct 2020
8 May 2020
22 May 2020
8 May 2020
21 May 2020
8 May 2020
Amount
Earth work in excavation in ordinary soil exclusive of compensation of earth including breaking of clods and dressing with a combied lead of 75 mts complete in all respect as per HSR itme No. 6.6
Preparing watering and ramming surface for laying concrete in head works. (HSR itme No. 10.122(a) (i)
Centering and shuttering of concrete foundation and foundation beams HSR Item No 9.13
Design mix cement concrete of grade M-15 with minimum cement contents 240 Kg per cum in foundation and plinth. HSR Item No 10.64 (A&C issued slip no 32 dated 11.11.19)
Design mix cement concrete of grade M-25 with minimum cement contents 300 Kg per cum in foundation and plinth. HSR Item No 10.66 (A&C issued slip no 30 dated 25.10.19)
Extra for C.Conc. work done below 1.50 mtrs. below ground level (Note of HSR Item No. 10.90 (a)
Design mix reinforced cement concrete of grade M-25 with minimum cement contents 300 Kg per cum in first storey upto 4.00mts height above plinth level HSR Item No 10.73 (A&C issued slip no 30 dated 25.10.19)
Centering and shuttering for faces of walls, partitions, retaining walls well steining and the like (vertical and battering) including attached pilasters, butteresses etc. HSR Item No 9.5
Centring and shuttering for slab curverts with smooth exposed surface of slab up to 3 mtrs span (HSR item No 9.18(b) & note No XI chapter No 10.
Providing & fixing 20mm thick pre-moulded bituminous joint filler for expansion joint i/c the cost of sealing compound and primer coat (HSR item No. 24.35 (b)
Rehandling and compection along structures with earth work excavated from foundation and trenches with a combined lead of 30 mts. HSR Item No 6.2©(i)
Ist class brick work laid in cm 1:3 in F&P i/c supply and C/O all materials and curing etc. as per HSR item No.11.5
Ist class brick work laid in cement sand mortar 1:3 in super structure i/c supply and C/O all materials & curing etc. (HSR item No. 11.10
Cement pointing 1:2 deep variety (HSR item No.15.60)
10 mm thick cement plaster 1:3 (HSR Item No15.2
Finishing walls with exterior decorative cement based paint such as snocem, robbiacem etc on newly plastered surfaces to give an even shade as per HSR Item No 16.61
Providing weep hole in F.O. wall i/c well drainage filter (NS item)
Supply of cold twisted deformed (ribbed/tor steel) bars for RCC works where not included in the complete rate of RCC i/c bending, binding and placing in position complete (HSR item No. 18.22)
Providing and fixing in position caution iron board 4'x3', 500' U/s & D/s 500' from diversion of channel (NS item )
Sand filling behind abutment, wing walls and F.O. walls with an average lead of 10 Km i/c loading and unloading (HSR item No. 5.2 (a) 4(i)
Filling loose stone boulders in bed of drain
Structural steel work in compound girders or stanchions built up from two or more R.S. joists or channel section or plate and angle rivetted including cutting and fixing all lattice bars, stifferners, gusset plates bolts, nuts rivets etc, complete with flanges plates heads sole plates, angle connections, etc, with hoisting and errecting in position. (HSR item No. 18.5(a))
Steel work fixed independtly with out connecting plates i/c cutting hoisting and fixing in postion (HSR item No.18.1 (b)
Structural steel work in angles,tees,and flates welded including cutting fixing all susset plates bolts, nuts, welding rods ,etc, with hoisting and errecting in position for roof trusses, well kerbs, plates and trussed girders, etc of any span for building and bridges. HSR Item No 18.7
Corrugated G.I. sheets roofing 0.8mm thick with G.I. hooks 10mm dia G.I. impact and bitumeneous washers complete excluding cost of perlines rafters trusses. (HSR item No. 13.18)
Ridges and valleys 45 cm over all in plain GI sheets 0.80 mm thick fixed with galvanized iron J and L hooks 10 mm dia GI limpet and bitumen washers, complete.HSR Item No 13.23
Planking of commercial hard wood such as hillock champ chikrasy planed on both sides rebated and fixed in position i/c nails and screws etc. 50 mm thick (HSR item No. 17.16)
Supply and fixing rolling shutters of approved make, M.S. Laths interlocked together through their entire length and jointed together at the end by end locks mounted on speciallly designed pipe shaft with brackets side guides, 2.50 cm long wire spring grade no 2 and arragnenet for inside and outside locking with push and pull operation complete including top cover 0.80 mm thick. HSR Item No 18.18 (b)
Supplying openable steel doors and windows of standard steel section joints mitred and electrically flash welded including provision for arrangement of receiving handles, peg stay catcher will also be welded with the frame and finishing with one coat of read mixed red lead not setting primer (HSR no. 18.24)
Providing and fixing fan hooks 80 cm each size of required shake and size 16mm dia (HSR no. 18.38(a)
Wire gauge 140 G. or 120 G design fixed on steel windows of standard rooled steel section of 3 mm thick flate iron cover moulding of 12. 5 mm wide fixed with machine screws complete all respect (HSR No. 18.32)
Applying primary coat on steel or iron work i/c preparation of surface (HSR 16.9)
Painting two coats excluding priming coat with ready mixed paint for metelled surface in all shades on new steel works (HSr No. 16.17)
White washing three coats (HSR 16.48)
Providing and laying filter media with brick ballast of varing sizes HSR Item No 10.116
Dismentling of brick work in cement HSR Item No 8.5(b)
Dismentling of cement conc 1:3:6 plain HSR Item No 8.6(c )
Dismentling of steel work upto height of 5 mts in built up section in angles, tees, flats and clhannels including all gusset plates, bolts, nuts, beading etc. including dismembering HSR Item No 8.22 (a)
Romoving rolling shutters including top cover bracket and side guides etc complete. HSR Item No 8.24
Stripping and stacking iron sheets of a roof including ridges etc. HSR Item No 8.11
Credit of ismentiled brick work
JOGINDER SINGH CONTRACTOR
Raghbir Singh Contractor
shamsher singh contracctor
Satish Contractor
M/S SATBIR SINGH CONTRACTOR
SATYAPAL CONTRACTOR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .