Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance INDUSTRIAL ESTATE PHASE III KHONMOH KHONMOH SRINAGAR JAMMU KASHMIR 191104 | 191104 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹31.9 L
EMD Value
₹63,720
Closing Date
4 Sept 2020, 4:00 pmClosed
DGM Unit 1st JKPCC Ltd Srinagar
DGM Unit 1st JKPCC Ltd Srinagar
Providing and fixing of PUF panels in walls/ceiling and other allied items for Construction of Pre-fab Kiosks (Bungri Bazar) at Hazratbal Shrine under integrated Development of Hazratbal Shrine
2020_PWDJK_102991_1
20/e-Tendering/DGM/1st/SGR/
Open Tender
Civil Works
Item Rate
45 days
Hazratbal srinagar
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,000
Yes
FC JKPCC Ltd A/c
₹63,720
Yes
12 Sept 2020
26 Aug 2020
5 Sept 2020
26 Aug 2020
4 Sept 2020
26 Aug 2020
Amount
Providing & fixing of polyurethane insulated PUF panels in walls partitions & in ceiling of following thickness (40 / 60mm) sandwich panels shall be made out of 0.5mm thick PGI pre-coated sheet confirming to IS 12436:1988, on both sides of PU foam. PUF panels shall be jointed with T&G and properly sealed with the help of expanding PU foam, which must be CFC free, self extinguishing fire retardant type having density of 40+2Kg/Cum, thermal conductivity @ 100C, 0.02W/M0K. All gaps, ends and corners shall be covered by 0.5mm thick pre-coated flashing so that PUF or joint etc are not visible from inside/outside. The PUF panels shall be fixed with frame/structure with SS screws, nuts, bolts or any other type of fixing arrangement approved & complete in all respects as per drawings, design & directions of Incharge Engineer, incl. all consequential and incidental charges like leads, lifts, carriages and scaffolding etc complete job (minimum supporting section in partitions & ceiling should be (50x50x6) ISA or as required at site)
a) 40mm (ceiling)
b) 60mm (Walls)
Supplying & fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length & jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside & outside locking with push & pull operation complete incl. the cost of providing & fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS 4454 Part-1 and MS top cover of required thickness for rolling shutters incl. cost of priming with red oxide steel primer, incl. all electricity charges Complete Job.
Providing & laying thick cement concrete flooring in M-15nominal mix, maximum size of aggregates 20mm, concrete finished with a neat coat of floating cement incl. all electricity/water charges complete (Nallah) excluding cost of cement(40mm thick).
Providing / fixing / fabrication & erecting welded Structural steel built up sections in beams /rafters/purlins and the like incl. cuting, hoisting & providing / labour charges for priming coat incl. cost of welding, electrodes, electricity charges all leads & lifts complete job (as per drawings) (SAIL or JINDAL or TATA )
Providing & fixing of colour corrugated sheets of specified colour as approved by structural consultant/Engineer Incharge with 0.5mm thick sheets fixed with 150mm overlap, fixed with supporting structure (steel truss) with 6-8mm dia drill bit nails alongwith limped bituminous felt washer & colour coated PVC Cap excluding colour coated ridges, valleys(600mm wide) but incl. all leads & lifts complete job ( (Note finished exposed measurements taken into account ) incl. electricity charges.
Providing & fixing of colour coated ridges/valleys of width 600mm fixed with supporting structure with 6-8mm dia drill bit nails alongwith limped bituminous felt washer incl. all leads & lifts Complete job.
Providing & fixing of colour coated PGI eves boarding comprising of with 1'-0" and 1.25mm thick as per required shade/colour incl. cost of nails all necessary leads, lifts, scaffolding & electricity charges Complete job.
Providing & fixing of Budloo Wood T&G Ceiling/Soffits of finished thickness (12mm) fixed over Budloo Ceiling Joists comprising of size 2"x2" with framing of size 1'-6" x 1'-6" incl. cost of stopper wherever required fixing in steel sections complete incl. two coats of wood primer of required shade incl. cost of nails, scaffolding, leads, lifts, wastages & electricity charges Complete Job incl. two coats of Touch Wood of required shade.
Providing & fixing of 2 ½" x 2 ½" Budloo Wood cornice fixing along the perifee of the building connecting with roof chajja incl. a coat of wood primer, incl. cost of nails, scaffolding, all leads, and lifts, electricity charges Complete Job.
M/S BCON
M/S RAFIQUEE METALS
M/S ABID BUILDERS and SUPPILERS
Aqua Engineers and Fabricators
J D POWER SOLUTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .