PROVISION OF SNOW AND RAIN SHED ALONGWITH ALLIED FACILITIES NEAR BUILDING NO P-229 AT JAKLI RC UNDER GE 970 EWS

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n exc 1.5m depth for foundation or for shafts, wells, etc and getting out in soft/loose soil complete all as specified and directed

Returning filling incl spreading leveling watering and well rammings in layers n exc 25cm complete all as specified and directed.

Removal of surplus soil n exc 50m and depositing where dirtected at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundation , filling and mass concrete complete all as specified and directed.

M&L for cement concrete work in pavement / hard standing of flexural strength 40 Kg/Square centimetre in field using 400 Kg of cement per cubic metre, thickness of concrete 25cm or less complete all as specified and directed.

M&L for Forming 12 mm thick ex pansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100mm thick concrete slab complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed.

Material & labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

M&L forExtra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses for granite or trap stone 40mm thick complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping) for concret flat surface complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for concrete flat surface complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed.

Rendering 15mm thick on fair face of brick/concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

Preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed..

Structural steel work for roof truses, purlins, crane, gantries, rails incl distance pieces, cleats etc conforming to Fe 410 (Gde-E-250) quality B complete all as specified and directed.

Plate (plain or chequered) cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment conforming to Fe 410 (Gde-E-250) quality B complete all as specified and directed.

Preparation of new steel surfaces on any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing (length and girth as fixed), fixed with self tapping screws complete all as specified & directed.

Hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

75mm PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection complete all as specified and directed.

PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including ISI marked medium grade white colour or Non metallic rigid PVC Conduit not less than 20 mm dia as per ground requirement with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switches, fan regulators etc for the following complete all as specified and as directed :-

One light / fan point controlled by one way switch

One 3 pin socket outlet 5 Amp on same board with other switches

Supply and fixing 5 Amp socket outlet 2 in 1, flush type ISI marked complete all as specified and a directed.

Supply and fixing switch piano 5 Amps one way flush type ISI marked complete all as specified and directed.

supply and fixing ceiling rose surface bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing flood light 200 Watt LED made up of pressure die cast aluminium housing with high pwer LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 complete all as specified and directed. MAKE : Bajaj / Philips / GE/CG

Supply and fiving sheet metal enclosure double door for DBs when MCBs to be used SPN 4 way with 200 Amp rated bus bar complete all as specified and directed.

Supply and fixing MCB SPN 40 Amps, 240 Volts complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amps 10 KA 240 Volts complete all as specified and directed.

Brick protection with brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches with width of brick parallel to the length of cable complete all as specified and directed.

Supply and fixing for earth conductor or main earthing lead Galvanised iron strip 32 x 6 mm with saddles and fixing screws etc for roof conductors and down conductors above grond fixed to wall on battn or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles/ shed or any other indicated situation for loop earthing etc as required complete all as specified and directed.

Sand cushioning to underground cable with clean dry sand locally available 8cm thick before laying the cable and 15cm above the cable,stretching and testing of cable complete all as specified and directed. Note : For payment purpose , punned thickness shall be measured and paid.

Supply, laying ,jointing and testing of XLPE under ground insulated, armoured, heavy duty LT 1100 volts 10 Sqmm 2 core grade cable with aluminium conductor ISI marked, laid in trenches/pipes, fixed to poles/walls with suitable saddle & glands complete all as specified and directed. (Note - Excavation, earthwork, sand cushioning , protection pipe and brick protection shall be measured and paid for separately )

Material and labour earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected togalvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.5 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia light grade protection pipe and salt etc and connected to earthing test point incl necessary earth work complete all as specified and directed.

Supply and fixing point terminal made of gun metal or phosphorus bronze size 75x75x25cm drilled and screwed drilled and screwed including 3Nos 8mm dia 25mm long hexagonal head screw complete all as specified and directed.

Supply and fixing Air termination, single pointed copper rod 12mm dia and 300mm long fixing on GI pipe or roof top etc complete all as specified and directed.

M/S NEW DAR WATER STAR

PARVAIZ AHMAD WANI

Javeed And Co

M/S Haji Zahoor Hussain Ganai

M/s Bashir Enterprises