REPAIR TO ROOF TREATMENT, FLOORING, PLUMBING, SEEPAGE, LEAKAGE, SUNKEN PORTION TREATMENT, SANITARY FITTING AND CONNECTED WORKS IN CERTAIN MD AND OTM BLDGS AT VAYUSENABAD AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

Taking down wall plastering finishes etc. complete all as specified and directed by Engr-in-charge.

M&L for Dubbing out average 10mm thick on irregular face of walls, (when chajjas, facia etc and mixed with WPC @ 3% wt of cement specifically ordered in writing) in CM (1:4) complete all as specified and directed by Engr-in-charge. Note WPC shall be paid separately in respective item

M&L for 15mm thick rendering in CM (14) on Brick masonry with water proofing compound @ 3% by weight of cement, surfaces to be finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note - WPC shall be measured and paid separately

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, over a coat of chalk whiting complete all as specified and directed by Engr-in-charge.

Cleaning of roof slab/chajja with sweeping with brooms, removing complete all as specified and directed by Engr-in-charge.

Taking down old existing roof treatment of any type including mud fuska and removing from MoD Land complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete of any type description and in any position complete all as specified and directed by Engr-in-charge.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed by Engr-in-charge.

Brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and directed by Engr-in-charge.

M&L for min 25mm thick cement concrete (1:2:4) type B-O using 12.5 mm graded stone aggregate in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick plastering in CM (1:3) on green concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note - WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge.

M&L for Providing cement concrete (1:3:6) Type C0 using 12.5 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified

M&L for preparing new surfaces and applying two coat of Polyurethane (PU) based Water proofing liquid compound as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capacity and removing from site to store yard complete all as specified and directed by Enar-in-charge.

Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capacity and removing from site to store yard complete all as specified and directed by Engr-in-charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified and directed by Engr-in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified and directed by Engr-in-charge.

Demolition and breaking of AC pipe set in cement mortat 150 mm dia complete all as specified and directed by Engr-in-charge.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 160 mm dia complete all as specified and directed by Engr-in-charge.

S&F for PVC (SWR) bend of 160 mm dia complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm complete all as specified and directed by Engr-in-charge.

All as per item No 22 but 20 mm bore pipe complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 15mm complete all as specified and directed by Engr-in-charge.

All as per item No 24 but 20mm bore pipe complete all as specified and directed by Engr-in-charge.

S&F 20 mm dia galvanized steel tubing, medium grade, with all fitting RM and fixed complete to walls celling or laid in floors complete all as specified and directed by Engr-in-charge.

All as per item No 26 but 15mm bore pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of stop valves cast copper alloy type screwed down high pressure with crutch or butterfly handle for 15mm bore complete all as specified and directed by Engr-in-charge.

S&F in repairs of Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete is reinforced (reinforcement) cut as required to facilitate demolition) In Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed by Engr-in-charge.

Form work to sides & soffits of beams, lintels, shelves, cantilevers, overhangs etc with flat rough finished surfaces of concrete complete all as specified and directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over, cut to length bent to shape required incl crancking, bending spirally for hooping for columns, hooking ends, drilling holes in existing walls/slabs and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conf to TMT bar complete all as specified and directed by Engr-in-charge.

M&L for RCC (1:2:4) type B1 by using 20 mm graded stone aggregate in Chajjas complete all as specified and directed by Engr-in-charge.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge.

S&F Anodised aluminium snap grid frame work (600mm x 600mm) for false ceiling complete all as specified and directed by Engr-in-charge.

S&F 12 mm thick Perforated particle board/tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap arid complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site complete all as specified and directed by Engr-in-charge.

Dismantling of AC/CGI/Fibre glass sheet corrugated/ semi corrugated sheet & ridge in roof covering complete all as specified and directed by Engr-in-charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (Unreinforced) in ground floor & paving n exc 15 cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge.

M&L for 100 mm thick Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base floor complete all as specified and directed by Engr-in-charge.

M&L for machine pressed coloured rubberisd moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 to 60 mm thickness M-35grey cement and pigment including laid over 25 mm thick layer of sand cushioning complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete blocks masonry with solid blocks exc 10 cm in width in PCC (1:2:4) TYPE B1 using 20 mm graded stone aggregate & set in CM (1:4) in walling as in kerb block, one edge chamfered and finished complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (Unreinforced) in ground floor & paving n exc 15 cm thick (below or above ground level) complete all as specified and directed by Engr-in-charge.

M&L for 100 mm thick Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base floor complete all as specified and directed by Engr-in-charge.

M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mmx300mm as in parking /hardstanding etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed by Engr-in-charge.

S&F in repairs of Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons/loops etc fixed cuttings and alteration if necessary where ever AC/ coolers exists complete all as specified and directed by Engr-in-charge.

S&F in repairs of 18 mm solid PVC ply of 1st quality of approved colour and fixed with screw, solvent cement/ adhesive complete all as specified and directed by Engineer-in-charge.

S&F in repairs of 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhesive complete all as specified and directed by Engr-in-charge.

S&F in repairs of 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhesive complete all as specified and directed by Engr-in-charge.

Demolition of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge.

M&L for fixing of Aluminium composite panel of 3mm thick natural stone fixed on wall as wall paneling with making grid of 1200mm X1200mm of MS square pipe of size 25mmx25mm of 4mm thick fixed complete all as specified and directed by Engr-in-charge. Cat part No WAB-609/WPL-1609 (cement stone)

S&F PVC wall lining consisting of 5mm thick plain colur PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing. Make Raj shree

S&F 5mm thick PVC sheet filit of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

FUTURE ENGINEERING

M/S DEVRAJ SINGHAL

ANAND ENTERPRISES