Upgradation of High School to Higher Secondary School (Arts Subject) under Samagra Shiksha 2024-25 Tushen High School (Tashar), Tashar, Ukhrul District

Amount

SH: A. Construction of 7 Classrooms

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil.

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.

Providing and laying cement concrete in foundation. Plinth excluding the cost of centering and shuttering. a) 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 50 mm thick with cement concrete 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

a) Foundations, footings, bases of columns, etc. for mass concrete.

b) Columns, Pillars, Piers, Abutments, Posts and Struts.

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers.

d) Suspended floors, roofs, landings, balconies and access platform: floors etc. upto 200 mm in thickness

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : a) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement : a) 1:1.5:3 ( 1 cement : 1.5 c/sand : 3graded stone aggregate 20mm. Nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with a) 1:1.5:3 ( 1 cement : 1.5 c/sand : 3 graded stone aggregate 20mm. Nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete. Above Plinth level.Thermo-Mechanically bars.

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand).

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in: Cement mortar 1 : 4 (1 cement : 4 coarse sand).

Providing wood work in frames of door, windows, clerestory windows and other frames wrought, framed and fixed in position . a) Local best quality Teak wood :

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.35mm thick shutter a) Local best quality Teak wood :

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete a) 250 X 16mm .

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 100mm

Providing 40x3 mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts nuts & wooden plugs & embedding to cement concrete block 30x10x17 cm 1:3:6 (1 cement:3 coarse sand: 6 stone aggregate 20mm nominal gauge)

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. a) Hot finished welded type tubes

P/F precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with: Precoated galvanised iron profile sheets 0.50 mm thick

P/F precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : i) Ridges plain (500 - 600mm). Precoated galvanised iron profile sheets 0.50 mm thick.

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : a) First class Uningthou wood

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): a) White face insulating board 12mm thick

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. a) 40mm thick with 20mm nominal size stone aggregate.

12 mm Cement Plaster 1 :4 ( 1 Cem : 4 fine sand)

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall.

Applying priming coat:- With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: Two coats.

Providing and fixing 20mm plank as eave board with a) tolhao/uchan wood.

Steel work welded in built up sections, framed work in cutting hoisting fitting in position and applying a priming coat of red lead paint. a) In grating, frames, guard bar, railing, brackets, gates and similar works.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a) Fixed to openings /wooden frames with rawl plugs screws etc.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: a) 80mm dia nominal bore

SH: B. Construction of Boys & Girls Toilet block with Septic tank.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level: a) 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

b) 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for:

a) Foundations, footings, bases of columns, etc. for mass concrete.

b) Columns, Pillars, Piers, Abutments, Posts and Struts.

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers.

d) Suspended floors, roofs, landings, balconies and access platform.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level : (a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggrt. 20 mm. nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) Thermo-Mechanically Treated bars.

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in:

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately. a) Local best quality Teak wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. a) Local best quality Teak wood: 35 mm thick shutters

Providing and fixing ISI marked oxidised M.S.sliding door bolts with screws etc. complete a) 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : a) 200 x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 125mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work-

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) 100mm nominal outer dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc: Internal work - Exposed on wall: (a) 20mm nominal outer dia Pipes.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : a) Size 450x300x150 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

SH: C. Construction of Water Tank & Overhead tank for Rain Water Harvesting.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a)All kinds of soil.

Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Providing and laying cement concrete in foundation. Plinth excluding the cost of centering and shuttering. a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

a) Foundations, footings, bases of columns, etc. for mass concrete.

b) Suspended floors, roofs, landings, balconies and access platform. floors etc. upto 200 mm in thickness

c) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in: Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and laying in position of specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level: a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

R.C.C. work in walls (any thickness),including attached pilasters ,buttresses,plinth and string courses, fillets, columns, Pillars piers, abbutment,posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement : a) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with a) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete. Above Plinth level.Thermo-Mechanically bars.

12 mm Cement Plaster 1 :4 ( 1 Cem : 4 coarse sand)

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the roughside of single or half brick wall.

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime.

Providing and fixing brass bib cock of approved quality : a) 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

a) 20mm nominal outer dia Pipes

b) 75mm nominal outer dia Pipes

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. a) In grating, frames, guard bar, railing, brackets, gates and similar works.

P/F precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : a) Gutter (600 mm over all girth). Precoated galvanised iron profile sheets 0.50 mm thick.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. a) 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

a) Bend 87.5 : 75 mm bend

b) Coupler: 75 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 1.5 HP Centrifugal water pump

Providing and fixing 6.5 litres RO water purifier with active copper tech.

SH: D. Providing IEI

Wiring for light point/Fan point/Exhaust Fan point/Call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in PVC casing and caping with modular type switch modlar plate size, G.I. box and earthing the point with 1.5mm2 PVC insulated copper conductor single core cable

Group - A

Group - B

Group - C

Wiring for light power plug pt. with 2 x 4 mm 2 PVC insulated copper s/c cable in PVC casing capping along with 1 no. 4 mm 2 PVC insulated copper cond S/C cable for loop earthing etc. as reqd.

Wiring for circuit/sub-,aim wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit etc. as red.

1) 2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire

2) 2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire

3) 2 x 4mm2 + 1 x 4 mm2 earth wire

4) 2 x 6 mm2 + 1 x 6 mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc. as reqd.

1) 3 pin 5/6 amp socket outlet

2) 5/6 amp switch

3) 6 pin 15/16 amp sockets

4) 15/16 amp switch

S/F brass batten/angle holder i/c connection etc. as reqd.

S/F 48" sweep (1200mm) A.C. ceiling fan complete with down rod, canopy, 3(three) blades but without regulator etc as reqd. (Make Bajaj/Usha or similar)

20 W LED tybe with single side connection (20 W LED 6500 K. Havells)

LED Adora 9 W B22 CDL BALL LAMP (Havells)

S/F (following way), single/double pole and neutral, sheet steel MCCB distribution board, 240 V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd.

2) 8 way single door

S/F single pole 5 amp to 32 amp rating 230 V B series MCB for lighting and other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd. Single pole and neutral

S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Earthing with G.I. earth pipe 4.5 m long 40 mm dia i/c accessories and providing masonary enclosure with cover plate having locking arrangemeng and watering pipe etc. (but withou charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for pipe earth electrode as reqd.

P/L eart connection from earth electrode with 4 mm dia copper wire in 15 mm dia G.I. pipe as reqd.

100 amp/63 amp 500 V procelain fuse unit (Kit-kat)

P/F 125 amp TPN stand ground on load change over switch (compact design) 415/500 V including connection etc. as reqd.