SPECIAL REPAIRS TO BLDG NO.T-32 AND T-33 AT ATS BELAGAVI

Amount

Dismantling of Mangalore pattern or similar tiles in roof coverings incl ridges all as directed.

Taking down of Battens for tiles, shingles etc, of any size including tilting fillets spacing exc 15 cm all as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

Dismantling Asbestos cement sheets any type in roof covering all as directed.

M & L pre painted galvalume alumium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and providing cyclonic washers all as specified and as directed.(Note :- The length of self tapping screw may vary for wooden and steel truss, Contractor to quote rate accordingly.)

M & L pre painted galvalume alumium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in rideges, roof overing/cladding to wall, fixed with self tapping screws all as specified and as directed. (Note :- The length of self tapping screw may vary for wooden and steel truss, Contractor to quote rate accordingly.)

S&F Mild steel plain,galvanised steel sheet 1.00 mm thick as in ridges, hips,vally gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc including necessary welding all as specified and as directed.

M & L for Mild steel work a in hold fast, wall ties,bands, chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,straps or similar small articles conforming to Fe-290 Gde E-165 etc.complete all as specified and directed.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets, frame work all as directed. Note : flat iron should be measured & deduct Schedule of credit seperately under scrap iron.

M & L for powder coated Aluminium snap grid (minimum 50 microns thickness powder coating) of size 605 x 605 mm with anodised aluminium angle of size 25mmx25mm x1.5mm thick and main & cross T of size 40mm x 25mm x 1.5mm thick for false ceiling including fixing of supporting hangers all as specified and directed . Note :Cost of hangers will be measured & paid seperately under relevant items of this schedule

S & F Hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S & F 12 mm thick Gypsum board of size 600 x 600 mm in ceiling fixed with screws and finished with two coats oil bound distemper over a coat of self primer all as per manufaturers instructions complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section in any position (unframed work) complete all as specified and directed.

Dismentling of framed wooden trusses span n exc 10 m of any discription all as specified and directed.

S & F Roof trusses (framed), trussed purlins/rafters rails and fastenings and heavy brackets framing including distance pieces, cleats etc Fe 410-W (Gde E-250) quality B all as specified and directed

M & L Structural steel of plates, Fe-410 W (Gde E-250) Quality-B), channels, square cut or notched (ordinary or counter sunk) forming holes with riveted, bolted or welded attachments all as specified and directed

S & F of Steel tubular trusses/posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section , including taking out embedded protion in concrete, brick work, and masonary etc and making good disturbed ground all as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided as directed.

M & L Plain Cement Concrete 1:2:4 type B1 using 20 mm stone aggregate for foundation,filling,mass concrete complete all as specified and directed.

M/L for Cement concrete type C-1 1:3:6 (20 mm graded aggregate as in coping including weathering, slightly rounded or chamfered angles and necessary form work complete complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thick ness (Below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone agg) as in floor finished without using extra cement complete all as specified and directed.

M & L for Joint free Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exc.0.06 sqm but not exc 0.11 sqm in floor with rectified edges etc set and jointed in neat cement slury over and including cement screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 300 x 450 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 mm thick backing with CM 1:4 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over and including cement screed base of CM 20 mm thick in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete all as specified and directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item above and including 10 mm rendering in CM 1:4all as specified and directed.

Rubbing and polishing to existing kota stone incluidng waxing to remove all stain, dirts/soil marks etc. all as specified and directed.

Taking down of chowkats with shutters (without taking off shutters from the frames) n exc 1.5 sqm each all as specified and directed.

Taking down of chowkats with shutters (without taking off shutters from the frames) exc 1.5 sqm and n exc 4 Sqm each all as specified and directed.

supplied and fixed Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

M & L Second class hard wood Plain, framed,panelled shutters 30 mm thick (any number ofpanels), withpanels of timberflat on both sides(feather edged), orof veneered particleboard mediumdensity, woodparticle board withcommercial faceveneers: suppliedand fitted to chowkats all as specified and directed.

S&F 40 mm thick Flush shutters, solid core construction, with blockboard core and plywoodface panels, commercialtype on both sides all as specified and directed.

M & L 2nd class glazed and skeleton shutters, 35 mm thick open rebaed and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

Rolled mild steel in Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W(Gde-E-250) quality-B all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with prelaminate particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face &2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification all as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt, complete with glazing bars,dovetailed or welded including with frame all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt, complete without glazing bars,dovetailed or welded including with frame all as specified and directed.

Providing, cement concrete in type B 11:2:4 (20 mm graded aggregate)in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified and directed.

S & F sheet glass 4mm thick, ordinary quality and glazing with wooden beading, not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M & L 4 mm thick figured glass, pin head type and glazing with wooden beading, not exc 0.5 Sqm in each pane all as specified and directed.

S/F 140 mm floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring fixed in floor all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt all as specified and directed.

S & F Butt hinges 100 mm long medium Weight cold rolled of steel all as specified and directed.

S & F for 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple all as specified and directed.

Supply and fixed 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete in mild steel fixed to MS frame or wooden framed all as specified and directed.

S&F 150 mm long extruded aluminium anodised handle fabricated typeall as specified and directed.

Supply and fixing in repairs harrison rails, mild steel, chromium plated with fixing brackets,stops roller etc. all as specified and as directed.

Taking down cement plaster on brick or stone walls, celing etc incl raking out joints hacking for key, scrubbing down with water etc complete including removing rubbish off the premises all as specified and directed.

M & L rendering 15mm thick on fair faces of brick masonry in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of external old plasterd surfaces of walls by complete removal of existing treatment including washing, rubbing and cleaning and applying a coat of primer and two coats of antifungal paint all as specified.

M&L for preparation of external new plasterd surfaces of walls and applying a coat of primer and two coats of antifungal paint all as specified.

Three coats of white wash on walls, pillasters, cornices, etc., on newly plastered walls including preparation of surfaces all as specified and as directed.

M & L for complete removal of existing treatment of old surface of wall by scrapping wand washing including perpration of surface by applying a thin layer of wall putty (JK or Birla) and applying two coat of oil bound distemper all as specified and directed

M & L for preparation of of new surface by applying a thin layer of wall putty (JK or Birla) and applying two coat of oil bound distemper all as specified and directed

M & L Painting and preperation of new wooden surfaces applying pink primer and two coats of synthetic enamel paint (ordinary tint) over 10cm width or girth all as specified and directed.

M/L for two coats of synthetic enemal paint over a coat of red oxide on new steel surfaces including preparation of surface complete all as spd

M/L for two coats of synthetic enemal paint over a coat of red oxide on new steel surfacesSurfaces of any description, n.exc10cm in width or girth when unconnected with other painting or when painted in a different tint all as specified and directed.

One coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surface all as specified and as directed.

One coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surface all as specified and as directed.

One coat of white wash on old decorated surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

Plain Cement concrete 1:3:6, type C2 (40mm graded aggregate) 75 mm thick as in plinth protection including finishing of concrete surface even and smooth without using extra cement all as specified and as directed.

M & L Plain cement concrete 1:3:6, type C- 2, (40mm graded stone aggregate) 75 mm thick as in approach path all as specified and as directed.

M & L Cement concrete 1:4:8, type D- 2, (40mm gradedaggregate) 75 mm thickas in approch path all as specified and as directed.

M & L 100mm thick cement concrete 1:2:4 , type B-1(20mm graded stone aggregate) as in path,finishing cement concrete surface even and smooth, spike rolling to surfaces or making impressions of expanded metal etc when the concrete is green all as specified and as directed.

Forming 12 mm thick expansion joints on 100 mm thick concrete slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ all as specified and as directed.

Cutting holes in brick/stone/PCC block walls built in cement mortar exc ½ bricks but not exc one brick thick for fixing hold fast and making good dismantled portion in cement concrete1:2:4, type B1 etc all as specified and as directed.

M & L for Plain mild steel wire, galvanised class 3 of 4 mm dia in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. all as specified and as directed. (each line of wire to be measured

M & L for hardcore with stone boulders of gauge not exc 63 mm deposited, spread and levelled in layers n exc 15 cm, thick, watered and rammed to a true surface

M/L cement concrete in foundation filling and mass concrete type D-2 1:4:8 (40 mm graded stone aggregate) all as specified and as directed.

Demolition of brickwork or stone/boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but all as specified all as specified and as directed.

M & L for pre cast cement concrete block masonry grade 'C' solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds etc. all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided all as specified and as directed.

M&L Precast cement concrete 1:2:4 type B1 (20mm agg) for cover Slabs (for man holes etc) setting in cement mortar(1:4) as specified and directed

S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Removal of concrete and plaster debris to a distance 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Excavating in trenches n.exc 1.50 m wide & n.exc 1.50 m depth n.exc 10sqm on plan for foundation or manhole. and getting out in hard/dense soil including existing unserviceable sewage line all as specified.

Demolition and breaking up drain pipes (SGSW, AC or RCC) 150 mm internal dia set in cement mortar complete all as specified and as directed. Note:- Excavation work shall be measured and paid seperately.

M & L Salt glazed stone ware pipe of grade 'A' laid in trenches and jointed with cement nominal dia of pipe.150 mm complete all as specified and directed.

M & L Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone agg) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe.

M & L Cement concrete 1:2:4, type B-1 (using 20mm gradecrushed stone agg) as in benching and forming channel inside manholes for section of pipe 100mm, 150mm or 200mm including finished smooth and even using extra cement

Returning filling in including spreading leveling and well ramming in layers n.exc 25 cm thick.

Removing excavated material to a distance exc 50m but n.exc 100 m and depositing where directed at a level n.exc 1.50m from starting point.

S & F reinforced concrete pipes dia 200mm class NP-2 laid and jointed complete with collers.

Taking up/down steel tubing and connection for 15mm bore of pipe complete all as specified and directed.

Taking up/down steel tubing and connection for 20mm bore of pipe complete all as specified and directed.

Taking up/down steel tubing and connection for 25mm bore of pipe complete all as specified and directed.

Taking up/down steel tubing and connection for 40mm bore of pipe complete all as specified and directed.

Taking up/down steel tubing and connection for 50mm bore of pipe complete all as specified and directed.

S & F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings like elbow,tee,reducer etc., any type of pipe for 15 mm bore complete all as specified and directed.

S & F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings like elbow,tee,reducer etc., any type of pipe for 20 mm bore complete all as specified and directed.

S & F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors including fittings like elbow,tee,reducer etc., any type of pipe for 25 mm bore complete all as specified and directed.

S & F in repairs Vitreous China bowl Urinal flat back size 430x370x340 mm with grating and union for discharge pipe,including providing and fixing plugs bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including brass screw complete all as specified and directed.

S & F in repairs vitreous china wash basin ,white flat or angle back of size size 550x400 mm excluding taps,waste,chain and plug and procelain stopperand including brackets/rack bolts and waste coupling,waste pipe etc complete all as specified and as directed.

S & F in repairs Vitreous China squatting pan of Orissa pattern of size 580x 440 mm white, with integral foot rests complete including provision of lime/ concrete bedding complete all as specified and directed.

S & F Swivel shower of PTMT any colour for fixing with 15 mm pipe. (min wt 40 gms) complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed '

S & F in repairs 15 mm CP Bib taps, fancy type cast copper alloy with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as directed.

S & F in repairs PVC valveless, symphonic action type, flushing cistern, low level 10 Ltr capacity white with inlet, ball valve, float and handle including brackets,connection pipe PVC flush pipe 32 mm dia or bore as required all as specified and directed.

S & F in repairs 15 mm CP Stop valves, fancy type cast copper alloy screwed down, high pressure, with crutch handle, screwed both ends and fixed all as directed.

S & F rotational moulded polyethylene water storage tank 500 lit capacity (cylindrical vertical with closed top), triple layered hoisted and fixed in position all as specified in SSR part I as in repair including dismantling of old unserviceable tank complete all as specified and directed.

S & F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of following sizes:- 20 mm bore & min wt 210 gms/each complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Gun-metal, globe or gate valves 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Gun-metal, globe or gate valves 50 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs 110 mm dia PVC SWR pipe single socketed with rubber ring joints, laid in trenches or in floors including taking down old pipe complete all as specified and directed.

PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring joint fixed to wall including taking down complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends with access door any radius all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single, (Single 'T'), equal or un equal all as specified and directed.

S & F 110 mm bore PVC (SWR) branch pieces single (single Y) equal or unequal all as specified and directed.

S & F of 110 mm bore PVC (SWR) branch piece, double, (double Y) equal or equal with access door complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed.

Taking down carefully unserviceable main switches/DB's off size from their position and removing materials from site all as specified and as directed by Engr-in-Charge

Taking down existing sub main wiring with aluminum conductor cable of 2 runs of 4/6/10 sqmm with GI earth wire on and including wooden batten and removing materials from the site and making good distrubed surface of walls and and roofs complete all as specified and as directed by Engr-in-Charge

Material and Labour for point wiring with PVC unsheathed multi standard 1.5 Sqmm FRLS copper Cable drawn in and including PVC casing capping 20/25 mm width complete with all accessories including 1.6 mm thick pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover for fixing switch,socket ,regulator etc of suitable size to be fixed on wall respectively including white washing/colour washing/distembering to match the disturbed surfaces including PVC unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuvity connected with common earth dolly complete for One light point controlled by one, one way switch 5 Amp complete all as directed

All as per item No 121 above but for one fan point controlled by one, one way switch 5 Amp all as specified and directed.

All as per item No 121 above but for one 3 pin switch socket outlet 5 amp independent all as specified and directed.

All as per item No 121 above but for one 3 pin switch socket outlet 5 amp on the same board complete all as specified and directed.

All as per item Sl No 121 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in contineous earth wire all as specified and directed.

M&L complete for switch piano flush button single pole one way 5 Amp 240 V all as specified and directed.

M&L for switch socket combination 2 in 1,3 pin 5 Amp flush type 240 volts complete all as specified

M&L for socket outlet 3 pin, 5 Amp flush type 240 volts complete all as specified

M&L for switch socket combination 2 in 1,3 pin 16 Amp flush type 240 volts complete all as specified

M&L complete for ceiling rose surface backelite three terminal 240 volts complete all as specified

S&F fan regulator, electronic, step type , flush mounting complete all as specified and as directed.

Supply and Fix REGAL Batten for LED tube with single LED Lamp 1x 20 w, Ultra bright glass LED Tubelight with very high efficacy suited for installation in T5/T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make & Model No for Batten :CROMPTON Cat No Regal LED Batten Cat No DIJB12LT8-20and LED Lamp LED Lamp Crompton Cat No LGT8-20-865-2 or equivellent model of other Make

S&F LED building security light made of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP-66 protection with SPD LED street light of 20 Watt all as cat part no .LSTS-20-CDL-M of Crompton make or equivalent make of Bajaj/Philips/Wipro/Havells.with sutable size bracket made to shape of 40 mm dia GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete all as specified and directed.

Supply and Fix recessed type LED Light fitting 28 Watts of size 2 x 2 LED edge-lite luminaries suitable for armstrong/grid ceiling complete for low celing application with LED Drive of 28 Watts complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed Model No : Havells Cat No ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD and Drivers Cat Part No. LEDDRIVER36V28WS or equivellent model of other Makes .

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with one run 6 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 6 sq mm cable and one run of 6 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

S&F sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way complete all as specified and as directed .

S&F sheet metal enclosure factory made double door for TPN 4 way with 200 Amps rated bus bar complete all as specified and as directed .

M&L complete for MCB TPN 40 Amps 240 volts, 50 Hz AC supply including taking down unserviceable complete all as specified & directed.

M&L complete for MCB SPN 32 Amps 240 volts, 50 Hz AC supply including taking down unserviceable complete all as specified & directed.

M&L complete for MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply including taking down unserviceable complete all as specified & directed.

Taking down ceilng fan fan, dismantling blades and removing fan and blades to store, Painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector of fan complete all as specified & directed.

M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in Electrical Plate No 3 of SSR Part-I and testing on completion.

M&L for GI pipes medium grade with all fitting such as tees, bends etc laid in trenches of 25 mm bore complete all as specified and directed.

M&L for GI pipes medium grade with all fitting such as tees, bends etc laid in trenches of 40 mm bore complete all as specified and directed.

M&L for GI pipes medium grade with all fitting such as tees, bends etc laid in trenches of 50 mm bore complete all as specified and directed.

M&L for GI pipes medium grade with all fitting such as tees, bends etc fixed on walls, ceillings or laid in floors of 25 mm bore complete all as specified and directed.

M&L for GI pipes medium grade with all fitting such as tees, bends etc fixed on walls, ceillings or laid in floors of 40 mm bore complete all as specified and directed.

S & F 25mm bore gun metal or globe valves with iron wheel head, screwed both ends for iron pipes including taking down of unserviceable gate valve complete all as specified and as directed.

S & F 40mm bore gun metal or globe valves with iron wheel head, screwed both ends for iron pipes including taking down of unserviceable gate valve complete all as specified and as directed.

S & F 50mm bore gun metal or globe valves with iron wheel head, screwed both ends for iron pipes including taking down of unserviceable gate valve complete all as specified and as directed.

Cutting the existing pipe line to take branch line for insertion of 'Tee' for 40/ 50mm dia GI pipe line including 'Tee' complete all as specified and directed.

shree bhavani constructions

M/S JAYDEEP CONSTRUCTION

DHANSHRI ENTERPRISES

ASHIRWAD ELECTRICALS

DHAIRYASIL RAMAKANT DESAI

Manak landmarks

Phoenix Infra