8807REPAIR REPLACEMENT OF JOINERY FLOORING SANITARY FITTINGS INT WATER SUPPLY PERIODICAL SERVICES WELCOME MAINT MISC WORKS OMQ AREA IN WEST AREA UNDER GE M AF STATION JALAHALLI BANGALORE

Amount

SCHEDULE 'A' PART I B&R WORKS Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Paving's, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide up to total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

All as per item No 05 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4 complete all as specified and as directed.

M&L Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L glazed ceramic designer coloured tiles of size 450 X 350 X 7 mm thick as in vertical surface, set, jointed in neat cement slurry and pointed in white cement using pigment to match color of tiles incl 10 mm thick plaster in CM 1:4 complete all as specified & directed NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Vitrified Ceramic Tiles 9-10mm thick (Square/ Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

M&L Vitrified Ceramic Tiles 9-10mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.

M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for ceramic coloured tiles of size 450x350mmx7mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured.

S/F for Vitrified ceramic tiles 9 - 10 mm thick dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed or bedding layer of mortar 15 mm thick in cm 1:4 for laying floor finishes

All as per item No 13 but vertical surfaces incl 10 mm thick cement plaster in cm 1:4

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L for pre- polished granite slab machine cut 18 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as 'specified and as directed.

Dismantling boarding, any description, fixed in any position with nails

M & L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work and all as specified and directed.

S&F 18/19 mm thick Block boards, grade 2 quality interior grade commercial type, fixed with screws to timber frame work and all as specified and directed.

M & L for 2 class hardwood bull-nosed, splayed, champhered or rounded on one edge or face fixed with nails complete all as specified and as directed.

S & F 30 mm width of flap Continuous (Piano) hinges, mild steel, bright finish or electro galvanised.

S & F in repairs brass mortise lock vertical type of size 100 mm with 4 levers

S & F in repairs 40mm dia, brass cupboard knobs fixed with nut, screw and washer

S & F in repairs aluminium anodised hasp and staple , 125mm safety type hinge pin including bolt type.

S & F in repairs Al door cill fixed to door bottom complete, all as directed.

S & F in repairs 140 mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

S & F in repairs MS peg stay 300 mm long enamelled black for steel windows with hinged joints etc

M&L Machine cut Cuddapah Stone Slab 20-25mm thick in cooking platform and in similar work, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab and sides including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

Demolition Cement Concrete (Reinforced) of any description and in any position complete and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggre-gate) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.

M&L TMT Bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L TMT Bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Stone Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc.

M&L for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor.

M&L preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L Rendering (ceiling)5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

M&L preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

S&F Factory made PVC choawkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete as per manufacture’s specification

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.

S&F Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.

S&F for IInd class Hardwood of small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete.

Taking down Pressed Steel Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.

S&F Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.

S&F for 35 mm thick 2nd class HW factory made panelled shutters with panel of 12 mm thick veneered commercial plywood kiln seasoned chemically treated with 15 x 6 mm edging all around the panels.

M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.

M&L Galvanised steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

M&L Galvanised Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and Fixed-in-repairs, complete all as specified and as directed.

S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.

S&F Aluminium Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F Mild Steel Sliding Door Bolts having length of Bolt 300mm, plate type, stove enamelled black, with bright Bolt not less than 12mm dia with and including a minimum of 6 Bolts and Nuts, 4 on Bolt Plate and 2 on Staple Plate and fixed-in-repairs, complete all as specified and as directed.

S&F mild Steel Butt Hinge 100mm long (weight not less than 80 Gram) and fixed, complete all as specified and as directed.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.

S & F in repairs Aluminium Handles cast type anodised 150 mm long for steel windows/wooden shutters with necessary fittings

M & L for servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling replacing welding broken hinges making good disturbed portion painting all as specified as directed by Engr-in –charge.

S&F Floor Door Stopper 150mm in size, Aluminium alloy Body and Tongue (weight not less than 90 Gram), complete all as specified and as directed.

S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

S&F Mild Steel 300mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed-in-repairs, complete all as specified and as directed.

M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, complete all as specified and as directed.

M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, steel peg stay, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.

Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares/rectangle n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

All as per item No.73 here-in-before but glass pane exc. 0.5 sqm in each pane.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and , S/F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane and securing with new oil putty and providing and fixing new metal beadings complete.

S & F in repairs MS 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete

Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.

M&L Mild Steel Framed Works such as Grills, gates, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.

M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

S&F in repairs mild steel powder coated curtain rods 25 mm dia complete all as specified and as directed

S&F in repairs mild steel curtain brackets and all as specified and directed.

S&F in repairs mild steel holding clips for curtain rod and all as specified and directed.

S & F in repair waste coupling 100 mm top dia of CP (half or full threaded) minimum weight 140 gram.

S & F in repair waste coupling 32 mm dia of PTMT (half or full threaded) minimum weight 45 gram.

S & F in repairs Al door cill fixed to door bottom complete, all as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

All as per item No 88 but as in refixing of old steel tubing.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

All as per item No 92 but as in refixing of old steel tubing.

Supply & fixing of in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed.

M&L preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.

M&L Complete Removal of existing Surface Treatment from Walls, applying a Coat of Wall Care Putty 1.5 minimum thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L complete removal of old decorated wall surfaces of any description ,cleaning the drops in the floor/shutters after treatment and applying two coat oil bound distemper over one coat interior primer and all as specified and directed by Engg-in- Charge.

M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of cement base paint all as specified

M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F in repairs Bib tap standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms/20mm-125gms)

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms))

S&F Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S & F in repairs stop valves fancy type chromium plated with long shank and cup ( concealed type ) screwed for iron pipe of 15 mm bore

S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S & F in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Water Storage Lead (cover) suitable for water tanks of capacity 500 Litre or 1000 Litre capacity, including suitable hinging device complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision of Lime Concrete Bedding and Making Good to Floor/disturbed surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ disturbed surfaces, including jet connections and white seat cover ISI marked with hinging devices etc., and fixed-in-repairs, complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demolition of supports etc. and making good the disturbed surfaces all as directed.

S & F in repairs PVC flexible pipe (Connecter) 15 mm dia, 600 mm long with check nut and bolt with washer all as specified

S&F in repairs PVC waste pipe 32/40mm bore for WHB & Sink

S&F Plastic Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed.

M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Symphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc.and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed.

S&F Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges and fixing-in-repairs, complete all as specified and as directed.

S&F Chromium Plated Shower Rose with Shower Arm 100mm, Swivel Joint including fixing to Steel Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed.

S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

S&F in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.

S & F in repairs Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete

S&F in repairs corner Glass Shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket for holding/hinging complete.

S&F CP Grating Round 100mm dia jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete.

S & F in repair 16 inches stainless steel shower shelves heavy duty embedded in the wall complete all as specified.

S& F in repairs for CP brass health faucet along with flexible pipe and stay complete all as specified and directed.

S&F in repairs CP toilet paper holder fixed to walls with chromium plated (CP) brass screws

S&F in repairs CP soap dish fixed to wall with chromium plated brass screws , all as specified.

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed.

Demolition and bracking up drain pipes 100 mm dia (salt glazed ware, AC or PVC, reinforced concrete) set in cement mortar incl bend and dimension piece etc. Complete.

All as per item No 139 but 75 mmdia of pipes.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors/walls incl clamps, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors/walls incl clamps, complete all as specified and as directed.

S&F PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

Resecuring or easing and adjusting wooden shutters exc 1.00 Sqm and n exc 2.00 sqm each without taking down

Resecuring or easing and adjusting wooden shutters not exc 1.00 Sqm each without taking down

S & F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and fittings with cement beadings and demolition of supports etc and making good the disturbed surfaces all as directed.

S&F for 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).

S&F PVC (SWR) 75mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with Access Door, etc., jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F Mortice Lock Vertical type, size 100mm, Mild Steel, 4-Lever and Fixed-in-repairs, complete all as specified and as directed.

Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified

S&F rotational moulded polythene water storage tank, cylindrical vertical with closed top, hoisted and fixed in position, 500 Ltr capacity complete all as specified and directed

SCHEDULE 'A' PART II E&M WORKS Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets, , etc., Making Good disturbed surfaces of Walls/ Ceilings, etc. in Cement Mortar 1:3 including providing Surface Treatment (Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.

Taking down/out unserviceable Sub-main Wiring from Batten/ Conduit/ PVC Casing Capping of any description, Making Good disturbed Portion/ Surfaces of Walls/ Floor/ Ceiling, etc. by using Cement Mortar 1:3 including providing Surface Treatment to match the Existing Treatment/ Finishes on Ground, complete all as specified and as directed.

M & L Point wiring complete with 1.5 sqmm single core PVC insulated and sheathed cable 1100 volts grade, FRLS with multistranded copper conductor drawn through and including PVC Conduit medium grade 20 mm dia and all accessories in surface PVC conduit/existing concealed conduit/PVC casing-capping ets as per site requirement on walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, existing/ new terminal box including fabricated steel terminal box made out of 1.60 mm thick MS sheet concealed in walls and suitable for modular type top cover for housing modular type fixtures such as switches, socket outlets, fan regulators etc., all as specified and as directed for One light point /fan point controlled by one switch. Make of wire-Havells/Finolex/Polycab. Make of coduit - Avon Plast/ Precision/Finolex.

All as per item No 156 here-in-before but for One ceiling fan point controlled by one switch and one regulator.

All as per item No 156 here-in-before but FOR One exhaust fan point controlled by one switch.

All as per item No 156 here-in-before but for One socket outlet 5 Amps on same board controlled by one switch.

All as per item No 156 here-in-before but for One socket outlet 5 Amps on independent board controlled by one switch.

All as per item No 156 here-in-before but for One light point controlled by two , two way switch.

All as per item No 156 here-in-before but for One call bell point controlled by one bell push.

All as per item No 156 here-in-before but using 2.5 sqmm copper conductor multi stranded for power point.

S & F modular switch 1 way 10 amps,1 module .

S & F modular switch 1 way 16 amps,1 module

S & F Modular switch 2 way 10 amps, 1 module

S & F modular socket 6/10Amps,2/3 pin combined 2 module

S & F modular socket 6/16 Amps,2/3 pin combined 2 module

S & F fan regulator,120 W,2 module

S & F Modular Bell push 6A 1 module

S&F white cover plate with frame 1 module

S&F white cover plate with frame 2 module

S&F white cover plate with frame 3 module

S&F white cover plate with frame 4 module

S&F white cover plate with frame 6 module

S&F Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Bell Push, Flush type, 6 Amp, Single Pole, 230 Volt AC for operating Bell/ Buzzer and connecting up, complete all as specified and as directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body complete all as directed.

S&F Switch Socket Combination 2-in-1, 3 Pin, 6/16 Amp, Flush type, Universal, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Socket Outlet 2-in-1, 3 Pin, 6 Amp, Flush type, 230 Volt AC and connecting up complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, 3 Pin, 6 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up complete all as specified and as directed.

S&F Ceiling Fan Regulator Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up, complete all as specified and as directed.

S & F Bell Multi Music type 230 V.

Supply and fix Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge. Make- Philips/CG or equivalent.

Supply and fix Supply and fixing LED lights fitting 1 x 20 W, 4' long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make- Philips/CG or equivalent.

Supply and fixing round shape 15/18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make CG/Bajaj/Philips.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with two core flexible copper conductor cable of suitable size including taking down old/unsv fittings all as specified and directed by Engr-in-charge.Make CG/Bajaj/Philips.

Supply and fix Bldg LED street light fitting 20/35 W, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP-66 Protection and complete including taking down old/unsv fittings all as specified and directed by Engr-in-charge. Make- Philips/CG or equivalent.

M & L for replacement of unsv LED driver up to 20 W matching with existing fitting complete all as specified and directed by Engr-in-charge.

S&F MCB Single Pole 6 to 32 Amp, 'C' Series 10 kA Breaking capacity, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 40 Amp, 'C' Series 10 kA Breaking capacity, 240 Volt and connecting up including Taking down/out unserviceable MCB, complete all as specified and as directed.

S & F RCCB 40 A, DP, 30 mA, 240 V including taking down unsv/defective RCCB of any type complete all as specified and directed. Make-Schineder/ Siemens/ Legrand

S&F Switch Piano Flush type, 6 Amp, Single Pole, 1-way, 230 Volt AC and connecting up including Taking down/ out unserviceable Switch Piano, complete all as specified and as directed.

S&F Socket Outlet 2-in-1, 3 Pin, 6 Amp, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Socket Outlet, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, 3 Pin, 6 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Switch Socket Combination, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, 3 Pin, 6/16 Amp, Multi-Plug, Flush type, 230 Volt AC and connecting up including Taking down/out unserviceable Switch Socket Combination, complete all as specified and as directed.

S&F Ceiling Fan Regulator Dimmar Switch type, 230 Volt AC, Rotary Stepped, Electronic type 120/280 Volt and connecting up including Taking down/out unserviceable Fan Regulator, complete all as specified and as directed.

Supply & fix Boxes junctions, plastic, round, four terminals including Taking down/out unserviceable junction box of any type, complete all as specified and as directed..

S & F Bell, AC, 230 volts, single pole including taking down unsv bell of any type. Make-Anchor/ Leader/ Indoasian/ Universal/Legrand/Havells.

M & L for wiring for circuit /sub main wiring with earth wire of size 2x 4.0sqmm + 1 x 4.0 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC conduit concealed complete all as specified and as directed.

M & L for wiring for circuit /sub main wiring with earth wire of size 2x 6.0sqmm + 1 x 6.0 sqmm of FRLS, PVC insulated copper conductor, single core cable in recessed , drawing in and including rigid PVC conduit concealed complete all as specified and as directed.

M&L Taking down unserviceable Ceiling Fan, Exhaust Fan of any Make & Size after disconnecting and removing to AGE E/M Store Yard for Opening & Checking to ascertain the quantum of Defects and Repair works involves, Re-hanging the same in Original Position after repaired and providing Electric Connection, complete all as specified and as directed.

S&F Ball Bearing (size as per existing one/ as approved) suitable for Ceiling Fan 1200/1400mm Sweep including Taking down/out unserviceable Ball Bearing, complete all as specified and as directed. Make : FAG/ NBC/ SKF

S&F Condenser 2.5 mfd suitable for Ceiling Fan of any Make and Size including Taking down/out unserviceable Condenser, complete all as specified and as directed.

S&F Gun Metal Bush (size as per existing one/ as approved) suitable for Ceiling Fan of any Make and Size including Taking down/out unserviceable Bush, complete all as specified and as directed. MAKE : FAG/ NBC/ SKF

S&F Rubber Bush (Reel type) standard size and type duly fixed with suitable size Mild Steel Bolt, Nuts, etc. including Taking down/out unserviceable Rubber Bush, complete all as specified and as directed.

M&L Transporting Ceiling Fan 1200/1400 mm Sweep from AGE E/M Store Yard to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamelled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Transporting Exhaust Fan 250/ 300/ 350mm Sweep from AGE E/M Store Yard to nearest Workshop, Removing burnt Winding of any type, Cleaning Slot, Rewinding Fan Motor with Super Enamelled Copper insulated Wire of suitable Gauge and Weight (as per existing) providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Fan to Site of Work after Rewinding, complete all as specified and as directed.

S&F PVC Stranded Copper Conductor Flexible Cable 1.5 Sqmm 3 Core for Electric Connection including Taking down unserviceable Cable, complete all as specified and as directed.

Taking down storage type water heater (Geyser) 25/50 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric and water supply connections and keeping the same in safe custody for carry out repairs/replacement of unserviceable spare parts & components such as heating element, thermostat, pilot lamps with wiring, insulating glass wool, thermal cut out, pressure release valve, safety valve,aperature plate assembly etc and examine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut,bolts and washers etc and adjust to required range of thermostat control and assembling all parts/ accessories including fixing back in same location after connecting up of water & electric connections and testing for its satisfactory functioning complete all as specified and directed. Note:- (i) Spares will be measured and paid separately under relevant item of schedule as supply only (ii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate.

Supply only heating element 1.5/2 KW, suitable for storage type water heater (As per sample). Make:-Hot max/Bajaj/CG/Remson

Supply only thermostat suitable for storage type/instant water heater (geyser) of any type/ capacity

Supply only aperature plate assembly suitable for storage type water heater (geyser) 25/50 litre capacity complete all as specified and directed

Supply only pressure release valve suitable for storage type water heater (geyser) 25/50 litre capacity complete all as specified and directed

Supply only safety valve suitable for storage type water heater (geyser) 25/50 litre capacity complete all as specified and directed

Supply only inner tank suitable for storage type water heater (geyser) 25/50 litre capacity.

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type

Supply and fix PVC pipe connections up to 600 mm in length suitable to connect GI pipe 15 mm dia to hot /Cold water outlet of geyser.Make: Kohinoor or eqivalent

SRI LAKSHMI VENKATESHWARA ENTERPRISES

BYRAVESHWARA CONSTUCTION