TMD/MIN-1049

Earth work in excavation in foundation trenches, pits or drains not exceeding 1.5 mtr in depth, 2 mtr in width as well as 10 Sqm on plan including clearing of bushes dressing of sides and ramming of bottoms, lift upto 1.5 Mtr including dewatering getting out the excavated soil and disposal of surplus excavated soil within a lead of 100 m including cost of labour, tools and tackles etc as per drawings, specifications and directions of Engineer-in-charge. a) Ordinary/dense soil mixed with gravels / rock fragments / lose waste.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per specification and direction of EIC

Supply, mix place in position compact & cure cement concrete 1 : 3 : 6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size below foundations, walls, wells, pits, trenches etc as per specifications drawings and directions of the Engineer including cost of all materials, labour, tools and tackles etc.

Providing and laying reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses plinth and string courses, fillets columns, piers, aboutments, posts and struts etc upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for all heights a) Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for all heights b) Suspended floors, roofs, landings, balconies shelves etc

Providing, hoisting and fixing upto floor five level precast reinforced cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size

Supply bend, bind and place reinforcement (above/below G.L) in all types of reinforced concrete work upto 3 Mtrs elevation, including cleaning, straightening, cutting, bending and binding with 18 SWG annealed wire or with welding such as tack, lap, butt etc with approved electrodes, providing concrete cover clocks, pins, chairs, nails, supports of reinforcement etc with all materials and labour complete as per specifications and directions of E. I. C including cost of reinforcement. Cold twisted bars

Add or deduct of plaster drip course/groove in plastered surface or moulding to RCC projections Size ½" x ½"

Supply and laying in position brick work with designate 75 bricks (compressive strength not less than 75 Kg/Sq.cm) in foundation, trench and upto plinth in cement-coarse sand mortar (1:6) including mixing mortar, laying bricks, raking joints, curing etc. complete with all materials and labour including cost of cement as per drawings and specifications as per the direction of Engineer-in-charge.

Supply and laying in position brick work with designate 75 bricks (compressive strength not less than 75 Kg/Sq.cm) in super structure at various elevations in cement-coarse sand mortar (1:6) including mixing mortar, laying bricks, raking joints, curing etc complete with all materials and labour but including cost of cement as per drawings and specifications of Engineer-in-charge.

Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm / 11.4 cm wide itumen felt type 3 grade 1

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete: 125x65x2.12 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 125 mm

M. S Casement window fastener with necessary screws etc complete

Providing and fixing oxidised M.S casement stays (straight peg type) with necessary screws etc complete with 300 mm weighing not less than 200 gms.

Supply, fabricate, transport and erect structural steel work like angle, channel, joist pipes plates sheets etc including all necessary connection materials and connections (including welding and bolting, nuts, washers, gussets etc complete) with 2 coats of 1st quality synthetic enamel paint over a coat of approved steel primer (ready mixed paint conforming to IS:2074) as per drawings, specifications and directions of the Engineer-in-charge including cost of all materials, labour, tools and tackles etc but including cost of all structural steel.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6 mm for diagonal braces

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing 12mm cement plaster ( 1 : 3) with clean coarse sand of F. M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor all complete as per specification and direction of Engineer-in-charge

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete with 40 mm thick with 20 mm nominal size stone aggregate

15 mm thick (minimum) plastering with 1:6 (1 cement:6 coarse sand) to walls, channels in roof and other structures at various elevations including demolishing old plaster (if require), mixing, laying finishing, curing and necessary scaffolding work complete as per drawings, specifications and instructions of the Engineer with all materials and labour but including cost cement.

6mm thick cement plaster 1 : 3 ( 1 cement : 3 fine sand) in ceiling.

Neat cement punning including curing as per directions of Engineer-in-charge including cost of all labour, tools and tackles etc. but including cost of cement.

Supplying and applying three (3) coats of white wash over new work at various elevations including preparation of surfaces, cleaning etc. complete with all materials, labour, tools and tackle etc., scaffolding work as per specifications and directions of Engineer-in-charge COMPOSITION i) Water @ 5 litres per Kg of lime for making cream. ii) Fevicol DDl @ 4 gm. Per litre of lime cream. iii) Robin Blue @ 2gm. Per Kg lime.

Supplying and applying three (3) coats of exterior emulsion of approved brand and manufacture to exterior surfaces of concrete, masonry, plastered surfaces etc. at all elevations including preparation of surfaces by scraping and necessary scaffolding work etc.. complete including cost of all materials, labour, tools and tackle etc., complete as per drawings, specifications and directions of engineer-in-charge. (Application of paint should be made as per manufacturer's specifications).

Painting with Brolac Polyurethane enamel paint (Jenson & Nicholson make) in all shades to give an even shade including cost of all materials and labour on New work (two or more coats) as per directions of Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Supply & installation of distribution board. This should be 14 SWG sheet steel totally enclosed dust and vermin proof wall mounting type havingbottom entryfrom incoming cable and top exists for O/G cables/PVC conduit with ample cabling space, adopter cable box for easy entry of armoured cable of size 2/3 C x 10/16 Sqmm. The board shall be degreased, derusted coated with high losture of zinc chromatic primer & finished with stove enameled paint. The board shall be complete with all accessories, danger notice plate, cable gland plate, terminals for outgoing connections earthing terminals heavy duty brass neutral & earth bar, 63 A capacity. The DB should be provided with neoprene rubber gasket & hinged door with suitable cutout for MCBS. The DB should consist of following: 1) DP switch 240V 32 A Make - Havells/Standard/L&T/HPL-01 No as I/C with backup HRC fuses, 32A & DP MCB, 20A (Havells/Hager/Standard) 2) Outgoings- 3) SP MCB, 220V, 6/10 A Make - Havells/Standard/L&T=8 Nos.

Supply & installation of 48" sweep, 220v brown coloured single phase dauble ball bearing ceiling fan complete with down rod, canopy, clamp etc including all necessaryhardwares as required. Make - USHA, Model Usha swift. This also includes supply & connection of ceiling fan by flexible 2C x 2.5 Sqmm 'Cu' wire from ceiling rose. This also includes civil works involved in supply and grouting of hook without extra cost.

Point wiring through heavy duty PVC conduit with 2 x 2.5 Sqmm PVC insulted flexible, stranded 'Al' conductor wire of 1.1 Kv grade along with 1.5 Sqmm PVC insulated 1.1 KV grade green colour 'Al' earth wire. The point wire includes supply & fixing the heavy duty PVC conduit, 5A "Anchor make" switch, socket, ceiling, rose, required switchboards, round block, JBS cable, wires Buid holder, bulb andohter fixing materials etc. Eachpoint shall be considered for a average length of 10 Mtrs Making of wire/cable-Rajnigandha/Havells. The quality of PVC conduit & others wiring materials require prior approval of Engineer-in-charge/Engineer representatives.

Supply and laying of 2 x 1C x 4 Sqmm PVC insulated and sheathed 'Al' conductor + 1C x 1.5 Sqmm 'Al' flexible wire for earthing through heavyduty (3mm thick) 32 mm dia PVC conduit this also includes supply of PVC conduit and other required materials.

Preparation of earth pit with supply of all materials including 3 mtr long, 3.64 mm thick perforated GI tube with salt in alternate layer of charcoal, Brick chamber at the topwith chequered plate (6mm) thick as per IS-3043 with latest amendments

Supply and laying of GI wire (8/10 SWG) and its connection to distribution boards and interconnection of earthpits. This includes supply and fixing of all acessories i.e., clamps etc

Installation of tube light fitting, cat no T5RSF228EB

M/S R K ENTERPRISES