M/o Road (C/o Table Top Speed Breaker on Internal Roads in Sector-63A), Noida.

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 12/SM(WC-4)/ET/2025-2026

Tender : M/o Road (C/o Table Top Speed Breaker on Internal Roads in Sector-63A), Noida.

Name of Tenderer Not Provided

TOTAL NIT COST OF PROJECT (In Rs.) 1253469.42

S. NO. ELIGIBILITY CRITERIA (Value To Be Filled By the Tenderer In Indian Rs.) Status FINAL STATUS QUALIFIED

1 SOLVENCY (Issued within a period of minimum six months). 40% OF TOTAL ESTIMATED COST NOT QUALIFIED NOT QUALIFIED

2 EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited Three similar completed works each costing not less than the amount equal to 40% of estimated cost put to tender NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

For Similarity of Works:- dsoy Hkou fuekZ.k] lh0lh0 jksM+] QqVikFk] Mªsu] ckWDl dYoZV] ls.Vªy otZ] isfUVax] lM+dksa dh lkekU; ejEer] Hkou] pkjnhokjh] bUVjykWfdax VkbZy] ukyh o lhesa.V ls lEcfU/kr dk;Z ds vuqHko ekU; gksxsaA lhoj ,oa tykiwfrZ ds vuqHko izek.k i= ekU; ugha gksxsaA

RESULT OF EXPERIENCE NOT QUALIFIED

3 TURNOVER (During the immediate LAST 3 consecutive financial years) 30% OF TOTAL ESTIMATED COST

YEAR1 0 NOT QUALIFIED NOT QUALIFIED

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive fiancial years.

4 Required Technical Staff (* the bidder must sumit the supporting document in original) Select

5 Required Machinary (* the bidder must sumit the supporting document in original) Select

6 Character Certificate of Indivisual /partners /directors issued from District Megistrate Select

7 Affidavit of not blacklisted Select

8 Address Proof/Id. Proof of indivisual /partners/directors. Select

9 Registration Certificate of GST Select

10 Filled in form Capability Statement. Select

11 Certified Copies of relevant pages of following documents: Select

a) Memorandum and Article of Association showing objectives of the Company / firm and authority to sign the e-Bid/contract or delegate the power to others for signing the e-Bid/contract. Select

b) Place of registration. Select

c) The power-of-attorney authorizing the tenderer to sign the e-Bid/ contract. Select

d) PAN certificate of the company/firm. Select

e) GST registration certificate of the Company/firm along with Declaration Select

f) Latest income tax return Select

RESULT NOT QUALIFIED

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Deputy General Manager (Civil), Sector-6, Noida

Name of Work: M/o Road (C/o Table Top Speed Breaker on Internal Roads in Sector-63A), Noida.

Contract No: 12/SM(WC-4)/ET/2025-2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Providing and applying tack coat using hot straight run bitumen of grade VG - 10,including heating the bitumen, spraying the bitumen with mechanically operatedspray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specificationsOn bituminous surface @ 0.50 Kg / sqm BI01010001010000000000000515BI0100001113 Sqm Excess(+) Full Conversion INR

2 Providing and laying Bituminous Concrete with higher capacity batch type HMP using crushed aggregates of specified grading ,premixed with bituminous binder @5.4 per cent by weight of total mix and filler ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with senor control to the required grade,level and alingment,rolling with smooth wheeled ,vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause no.507 complete in all respects. cum Excess(+) Full Conversion INR

3 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface, Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be lever, uniform and free from streaks and holes. Sqm Excess(+) Full Conversion INR

4 Reflective raised pavement Markers (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with made of plastic body of RPM/Road stud shall be moulded from ASA (Acrylic styrene Acrylonitrite) of HISP (Hight-Imoact Polystyrene) or Acryloniitrite Butadien styrene (ABS) or Any other suitable material approved by the engineer. The Marker shall support aloadof 13,635kg tested in accordance with ASTM D4280.The reflective panels shall consist of number of lenses contatning single of dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methvl methecrylate conforming to ASTM D788 of equivalent. The slop of retro-reflecting surface. shall preferable be 35+/-5 degree to base and the area ofeach retro reflecting surface shall not be less than 13.00 sqcm. the marker height shall not be less than 10mm and shall ont exceed 20mm & amp; width ahall not exceed 130mm. The base of the marker shall be flat with 1.3mm all road studs shall be legible marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marked, excess adhesive on the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the engineer.In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflectikve road markers, in case the markers are diksplaced, damaged, get worm out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such makers wihtin 15 days of the intimation from the engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the engineer-in-Charge. RPM(With shank) Nos. Excess(+) Full Conversion INR

5 Retro reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sing as per IRC : 67-2712 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeding 1.5mm thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly degigned foundation with M 15 grader cement concrete 45cm X 45 cm X 60 cm below ground level as per approved drawing. The retro reflective sheeting shall be tested for a certificate of having the sheeting tested for a coefficient of retro reflection, daytime colour and laminance, shrinkage, flexibility, liner removal, adhesion, inpact resistence, specular gloss and fungus resistance, 3 year s outdoor weathering and its having passed these tests shall be obtained form international/Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate in obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad, Alternativey, a certificate conforming to ASTM Specification (D 4956-09) on artifical accelerated weathering requirements form a requted laboratory in India can be accepted provisionally.In such a situation, the employer / client, if so disires, cound seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdeer weathering of the sheeting as per IRC 67:2012, :egends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7, P x i) i) 90 cm equllareral tringle with diffinitation plat size (20cm X 60cm) Speed Breaker. Nos. Excess(+) Full Conversion INR

6 Supply of J C B Complete at site on hire basis including cost of dise and driver etc. complete in all respect as per direction of engineer in- charge. Per Day Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information