PROVN OF FIRE HYDRANT SYSTEM AT BLDG No P-119 UNDER GE (E/M) LUCKNOW

Amount

Surface excavation in soft/loose soil n'exc. 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavation over area in soft/loose soil exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation complete all as specified and directed.

All as per item No 2 here-in-before exc 1.5 m but n.exc 3m depth

All as per item No 2 here-in-before exc 3.00 m but n.exc 4.5m depth

M&L for PCC M-15 using 20mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L for formwork to footing complete all as specified and directed.

M&L for formwork to retaining walls complete all as specified and directed.

M&L for TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M&L for RCC design mix M-30 using 20 mm graded stone aggregate as in retaining wall complete all as specified and directed.

M&L for formwork to soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) for rough finished faces complete all as specified and directed.

M&L for form work to sides of RCC slab n'exc. 150 mm thickness complete all as specified and directed. .

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups spacers and binders cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia complete all as specified and directed.

M&L for RCC design mix M-30 using 20 mm graded stone aggregate as in slabs supported on walls and in shelves like complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid WPC ISI marked complete all as specified and directed.

M & L Mild steel Rungs complete all as specified and directed.

M & L aluminium water bar complete all as specified and directed.

M & L for hard core of gauge n exc 63mm of broken of stone aggregate complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1, using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for laying of cable, pipes etc and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated materials to a distance n exc 50 m and depositing where directed at a level n'exc. 1.5 m above the starting point complete all as specified and directed.

Providing, laying, testing & Commissioning of MS pipe 100 mm bore, heavy duty conforming to IS 1239 part 2 1992 including all types of joints and heavy duty drop forged/fabricated fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc. laid in trenches. Pipes laid in trenches shall be provided with.anti corroosive wrapping coating as per IS10221 and the rate shall be deemed to be included for the same complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately.

The same as per item no 23 above but size 80 mm bore complete all as specified and directed.

The same as per item no 23 above but size 150 mm bore complete all as specified and directed.

Supplying, installing and commissioning 63 mm dia Single Way Hydrant Valve SS Complete with Blank Cap & Chaicomplete all as specified and directed.

M & L 63mm dia 15 mtr long Hose Pipe (Hose Pipe shall be of synthetic fibre) conforming to IS 636 complete with male and female coupling confirming to IS 903 complete all as specified and directed.

Supply Installation Testing and Commissioning of Weather proof Hose cabinet for keeping One hose pipe of length15 metre each, branch pipe, nozzle, coupling etc of MS sheet of thickness 2 mm complete all as specified and directed.

Supplying, installing and commissioning 63 mm dia SS Branch Pipe complete all as specified and directed.

Supplying, installing and commissioning 4 Way Fire Brigade Inlet Connection complete all as specified and directed.

Supply, installation, testing and commissioning of Butterfly Valve 80 mm dia with stainless steel including fittings complete all as specified and directed.

Supply, installation, testing and commissioning of cast iron flanged sluice valve 100 mm , rating PN1.6 with non rising spindle, bronze/gun metal seat ISI marked with nuts,bolts washer gaskets etc complete all as specified and directed.

Supply, installation, testing and commissioning of NRV Valve 100 mm dia including fittings complete all as specified and directed.

Supplying, Installation, Testing and Commissioning of Electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification. (a) Horizontal type, centrifugal, End Suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal head conforming to IS 1520. (b) Suitable capacity for driving the pump of 20 HP . Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. Includes as per standard size of PVC insulated Copper conductor cable through the medium grade PVC Pipe Standard Size. Note :- Contractor shall submit the performance curve alongwith design details of pump to GE for approval.

Supplying, Installation, Testing and Commissioning of Jockey Pump suitable for automatic operation and consisting of following: complete in all respect as required as per the technical specification. (a)Horizontal type, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal. (b)15 HP Squrrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads . Including as per standard size of PVC insulated Copper conductor cable through the medium grade PVC Pipe standard size complete all as specified and directed.

Supply,erection, testing and commissioning LT panel board for controling of Pump Starter oF size 1.5 x 1.0 x 0.50 mtr out door type factory made pedastal type outer fabricated out of 3 mm CRCA sheet and inner sheet of MS black sheet and slopy roof and spray painting two coat inside and outside with synthetic enamle paint of approved shade over a coat of red oxide primer locking arrangement comprises of 50 mm size Godrej brass pad lock with duplicate keys two earth terminal suitable cable gland for all incoming and outgoing cable grouting of feeder piller box 40 cm above ground level by providing 90 cm long angle iron of size 50x50x6 mm welded on all the four corner embeded in PCC 1:2:4 using 20 mm graded stone agregrate up to 50 cm deep including connection all exisiting cable with MCCB terminal all as specified and directed at the site as per requirment complete with and including the following component:-

Supplying, installing and commissioning Air cushion tank size 250 ltr PVC made complete all as specified and directed.

Supply, installation, testing and commissioning of Air Release Valve 25 mm dia with stainless steel internal and 25 mm dia ball valve including fittings complete all as specified and directed.

Supply and fix Pressure Gauge 100 mm dia with ball valve of pressure of 0-14 Kg/Sqcm, 3/8" BSP bottom entry,weather proof with stainless steel internals,siphon tube and ball valve including fittings complete all as specified and directed.

Supplying, installing and commissioning Pressure Switch push button type aotuomatic complete all as specified and directed.

Supply & fixing flat type submersible cable PVC insulated and PVC sheathed conducter 10 Sqmm 3 core 1100 volts grade, conforming IS-694:1977 with necessery electric connection complete all as specified and directed.

Supply,laying,jointing,testing and commissioning LT under ground electric power cable crossed linked polyethylene (XLPE) insulated, galvanised steel strip or wire armoured ISI 7098 marked with aluminium conductor multy stranded, heavy duty 1100 volt grade cable of size 50 Sqmm 3.5 core complete all as specified and directed. Note- excavation earth work shall be measured and paid seperatly under approriate items.

Prime Technology

Pradeep Bros

AMIT ASSOCIATES