8328 REPAIR / REPLACEMENT AND MAINT OF LT DISTRIBUTION SYSTEM INCL LT PANEL MCCB, LT CABLE AND CONNECTED ACCESSORIES AND REPAIR/REPLACEMENT OF SOLAR/STREET/GARDEN / PTLS HIGH MAST LIGHTS, DG SET ETC AT MIL STN SHAHJAHANPUR UNDER GE (E) BAREILLY.

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in soft / loose or any other type of soil for taking up or laying of cable complete all as specified and as directed.

All as per Srl item No 1 here in before but hard surfaces such as in road cutting / hard standing etc including making good disturbed surfaces to match with original complete all as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and as directed.

Material and labour sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be gently punned down to 10 cm complete all as specified and directed. (Note:- Only punned 18 CM thick sand cushioning shall be measured and paid)

Supply and laying of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the axis of cable including taking up of old UNSV bricks complete all as specified and directed.

Supply and erecting of Steel tubular swaged poles type 410 SP-31 (9.0 metre long) duly painted complete with cast iron base plate, finial taper plug, bolts, nuts, screws & washers including taking down existing old Steel tubular swaged poles complete all as specified and as directed. Make of Pole & fittings:- Bajaj or equivalent as approved by GE

S&F pin type insulator procelain, vitreous white, brown or green including galvanised mild steel spindle, two nos galvanised iron washer and one galvanised iron nut 100mm height, 65mm dia for 1100 volts grade complete including taking up of old UNSV pin type insulator complete all as specified and directed.

S&F shackle type insulator porcelain vitereous white, brown or green including galvanised M.S. straps 31x5mm size, 100mm height, 115mm dia including galvanised mild steel straps, nut, bolts washers complete for 1100 volts grade insulator complete including taking up of old UNSV Shakle type complete all as specified and directed.

M&L of cross arms, bracings, supports, clamps, back plate fabricated from structural steel sections such as channels, angles, flat iron including 16mm dia bolts, nuts, washers, welding, bending, cold or hot drilling holes for bolts / insulators in any shape and size as directed and inclusive of one priming coat of red oxide zinc chrome, one under coat and one finishing coat of aluminium paint including dismantling of old unserviceable cross arms complete including taking up of old UNSV cross arms complete all as specified and directed.

S&F in replacement of ACSR conductor for LT/HT OH Line aluminium conductor steel reinforced size as per existing including dismantling of old unserviceable ACSR conductor including taking up of old UNSV ACSR conductor complete all as specified and directed.

M&L of overhead lines galvanized steel wire 3.15mm or 4mm dia including dismantling of old unserviceable wire including taking down of old UNSV galvanised steel wire complete all as specified and directed.

M & L Cradles, hexagonal/rectangular,fabricated with galvanised steelwire 3.15 or 4mm dia complete all as specified and directed.

M & L PVC insulated aluminum wire 2 core 2.5 sqmm, 1100 volts grade connected from DB to DB/main board complete all as specified and as directed.

M&L for preparation of steel surfaces of vertical tublar pole 9 mtr long, LT type, complete with cross arms and apply one coat of aluminium paint including painting of black & yellow strip of 30 cm wide alternate upto 1.5mtr above coping and marking of MES No. etc., complete all as specified and as directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using GI Strip 32 x 6mm thick by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 40 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).

Supply and laying of earthing GI strip of size 32 x 6 mm from earth test point to Electrical equipment including taking up of old UNSV earthing strip complete all as specified and directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).

Supply Laying, jointing, testing and commissioning or fixing in replacement of 16 sqmm 4.0 core cable in wall or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade of cross sectional area as under including taking up of old UNSV XLPE cable complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

All as per Srl item No. 19 here in before but 25 sqmm 3.5 core size

All as per Srl item No. 19 here in before but 35 sqmm 3.5 core size

All as per Srl item No. 19 here in before but 50 sqmm 3.5 core size

All as per Srl item No. 19 here in before but 70 sqmm 3.5 core size

All as per Srl item No. 19 here in before but 120 sqmm 3.5 core size

All as per Srl item No. 19 here in before but 10 sqmm 4.0 core size

All as per Srl item No. 19 here in before but 6 sqmm 2 core size

All as per Srl item No. 19 here in before but 10 sqmm 2 core size

All as per Srl item No. 19 here in before but 400 sqmm 3.5 core size

All as per Srl item No. 19 here in before but 185 sqmm 3.5 core

S&F GI tubing light grade 50mm nominal bore for cable protection fixed with clamps of M.S. Flat iron 25x3mm, GI nuts, bolts and washers to poles/under floor/under roads/alongwith walls including two coats of aluminium paint over a coat of red oxide primer on clamps complete including taking up of old UNSV GI tubing complete all as specified and directed.

M&L PCC 1:3:6, type C1 (using 20mm graded stone aggregate) for coping of pole complete all as specified and directed.

M&L PCC 1:3:6, type C2 (using 40mm gradedstone aggregate) for stay assembly complete all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) for pole foundation etc., complete all as specified and directed.

S&F in replacement of LED street light fitting 90 Watt 230 V, AC, outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and directed.

S&F in replacement of LED flood light 100 watt, 230 V, AC, outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and directed.

S&F in replacement LED street light fitting 70 Watt, 230 V AC, outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and directed.

S&F in replacement LED street light fitting 60 Watt, 230 V AC, outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and directed.

S&F in replacement LED street light fitting 35 Watt, 230 V AC, outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and directed.

S&F in replacement GI pipe 25 mm dia 1.5 mtr long, GI bracket 0.60 mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 160 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs all as directed.

Supply & Fixing MCCB, 4 Pole, 200 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs all as directed.

Supply & Fixing MCCB, 4 Pole, 250 Amps, 415 Volt, 36kA including connecting up using suitable size of lugs all as directed.

Supply & Fixing MCCB, 4 Pole, 400 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs all as directed.

Supply & Fixing MCCB, 4 Pole, 350 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs all as directed.

Supply & Fixing MCCB, 4 Pole, 630 Amps, 415 Volt, 50 kA including connecting up using suitable size of lugs all as directed.

Trimming of trees all as along the LT line in such a way that there is clear distance of 3 meter between tree and electric line. The work will be executed to the entire satisfaction of Engr-In-Charge irrespective of the size of the tree branches etc complete all as specified and as directed. Note : (i) Tree branches etc will be left as itias the wood belongs to Cantt board/DEO and they will be responsible for the wood. (ii) Contractor will employ sufficient labour to complete the full one job with in about 15 days. (iii) Contractor will responsible for any type of accident while trimming the trees. (iv) Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply, however full assistance will be provided by MES staff.

M & L in replacement for stay assembly complete for LT over head line comprising of 7/4.00mm (7/8 SWG) galvanised M S Stranded wire of required length fixed to poles with and including flat iron, clamps, fabricated out of 50x6mm flat iron, bolts, nuts and washers, GI stay bow 19mm dia 400mm long with threading ends, GI nuts and wahsers, M S stay plate galvanised 305x305x6mm thick, stay rod 20mm dia, two numbers thimbles including taking out old unserviceable stay assembly complete all as specified and as directed. Note : Earth work and PCC measured and paid at approprite item.

M&L in replacement of DB for street light made out of CRC sheet, dust and vermin proof out door type duly painted of size 200 mm x 200 mm x 15 mm with arrangement of incoming and outgoing feeder with bus bar of suitable capacity for termination of line with single MCB SP, 230 V, 0.5 Amp 10 KA ( In accordance wth IS/IEC 60898-1) and arrangement for fixing cooper wire of size 2 x 1.5 Sqmm with 1 x 1.0 Sqmm earth wire in green color of FR PVC insulated copper conductor from DB to light fitting complete including taking up of old UNSV DB complete all as specified and directed.

M & L required for retrenching / tightening of LT over head line (Conductor) of any type/GI earth wire including opening out binding wire from pin / shackle / disc insulator and rebinding the conductor with insulator with 14 SWG binding wire complete all as directed.

Supply and fix street light LED driver luminar suitable for 30 watt to 100 watt complete all as specified and as directed.

Supply and fix Voltmeter 0 - 230 Volts, Digital display, flush mounted 96mm square 3 phase 4 wire with slector switch complete all as specified and as directed.

Supply and fix Ammeter 0 - 50 Amps, Digital display, flush mounted 96mm square 3 phase 4 wire with slector switch complete all as specified and as directed.

Supply and fix LED based indicator lamp sets comprising of three colours complete all as specified and as directed.

M & L for painting of existing panel with the same existing colour and repair and replacement of the doors of the existing panel complete all as specified and directed.

Supply and fixing 15 watt LED Bulb for flame proof light Garnet E 27 base (Crystal base) color temperature 6500K, 220 volts energy efficient complete all as specified and directed.

Taking down existing non functional security/street light fittings from pole/wall/pipe of any type of LED fitting of any wattage for repairing by replacing of the street light including replacement/ unserviceable accessories like SPD,LED Driver etc & refixing the same with & including connecting cable of 3core PVC sheathed Aluminium conductor not less than 4 Sqmm from light fitting to cable loping box & tightening of brackets, clamp by nut, bolts and washer including testing complete all as specified and directed. NOTE (i) Replacement and fixing of unserviceable component etc required will be measured & paid separately under respective items of this schedule.(ii) Fitting shall be connected with existing electric wire / cable, in case of existing wire / cable found unserviceable same shall be measured and paid in relevent items. (iii) Any type of Ladder or arrangement for dismantling of light from pole/hanger pole shall be arranged by the contractor.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete including making connection including taking down old unsv street light fitting complete all as specified and as directed.

S&F LED street light fitting 70 Watt 230 V, AC outdoor type with high pressure diecast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete including making connection including taking down old unsv street light fitting complete all as specified and as directed.

S&F LED street light fitting 90 Watt 230 V, AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete including making connection including taking down old unsv street light fitting complete all as specified and as directed.

S&F LED Flood light fitting 100 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection including taking down old unsv flood light fitting complete all as specified and as directed.

S&F Extruded aluminium decorative luminaire for LED (Retrofit) is an ideal solution for Garden/pathways light of housing material powder coated Zn plated ERW MS tubular section, coloure temp cool white 6500K LED 15 watt complete including making connection including taking down old unsv garden light fitting complete all as specified and as directed.

S&F mounting bracket made out of medium grade GI tubing suitable size bent to shape including 02 Nos MS clamps, Nut bolts, washers etc including dismantling and taking down the existing old rusted and weak mounting brackets of any size & type complete all as specified and as directed.

S&F in replacement 15 W LED Street Light suitable for Solar Light complete all as specified and as directed.

S&F street light LED driver luminar suitable for 30 watt to 100 watt complete all as specified and as directed.

S & F in repacement post top lantern type light fitting (RUBY (CLEAR)- IP65) New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.including making connection complete all as specified and directed.

S & F Decorative lyse décor square shade 18 watts black Metal Exterior gate light,garden Lamp, outdoor light durable long life water & Rust proof Metal holder type B22 (normal 2 pin type) size 18Lx18Wx28H .complete all as specified

S & F Varnet waterproof adjustable 5 to 10 watt outdoor garden LED Light aluminium die caste, rustproof lights for garden (colour as required) complete all as specified and directed.

S & F Decorative gate light made up of high grade unbreakable (Doom Only) polycarbonate material suitable for retrofit including LED Lamp 9W/10W Lamp B22 base complete all as specified and directed.

Supply and fix in replacement Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0metres long) complete all as specified and as directed

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

All as per Srl item No. 70 here in before but cross-sectional area 16 Sqmm 4.0 Core.

All as per Srl item No. 70 here in before but, cross-sectional area 10 Sqmm 4.0 Core.

M&L Boring under Road / PCC by using manual tool for inserting PVC/GI pipe of 40mm size for protection of cable complete all as specified and as directed.

Trimming of trees all as along the LT line in such a way that there is clear distance of 3 meter between tree and electric line. The work will be executed to the entire satisfaction of Engr-In-Charge irrespective of the size of the tree branches etc complete all as specified and as directed. Note : (i) Tree branches etc will be left as itias the wood belongs to Cantt board/DEO and they will be responsible for the wood. (ii) Contractor will employ sufficient labour to complete the full one job with in about 15 days. (iii) Contractor will responsible for any type of accident while trimming the trees. (iv) Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply, however full assistance will be provided by MES staff.

S&F of lead acid battery, 180 AH, industrial heavy duty, 25/ 27 plates for DG set starting only after disconnecting connection and taking down the unserviceable one.

M&L Preparation of old (exposed) painted surface of existing (410 SP-31) Steel tubler poles / strut including cross clamps etc complete and applying two coat of aluminium paint above band / straps and painting of band / strap with paint of colour red post office and black numbering of pole at a height 1.5 m above GL as per existing having 15mm wide of poles at a heigth 1.5 M above GL as per existing having 15 mm wide and 50 mm bolt letter compete all as specified and directed.

M&L for replacement of cross arms bracing supports clamps back plates fabricated from strucural steel sections including nut bolts washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directad and incclusive of two coat of aluminium paint over one coat of redoxide including taking down of unsv items all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate for coping around poles, including necessary form work finishing even and smooth complite all as specified and directed .

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 10 sqmm 2 core in service connections, one twin core cable circular complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 6.0 sqmm 2 core in service connections suspended by insulating hangers not more than 1 metre apart including 10sqmm suspension wire, one twin core cable circular complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 2.5 sqmm 2 core in service connections complete all as specified and as directed.

Supply & filling distilled water in batteries as required at various DG set installations all as specified and directed.

Maintenance/ servicing of different capacity of DG sets by carrying out check as per manfacturers maintenance chart : (Note:Engine Oil and patrs shall be measured and paid seperately under respective item.)

(b) DG set 30 KVA , Engine

(c) DG set 40 KVA, Engine.

(d) DG set 50 KVA, Engine.

(e) DG set 63 KVA, Engine.

Repair to PT pump & injector of 12.5 to 63 KVA DG Set by taking out carefully and refixing after caliberation at manufacturer dealer including replacement of u/s worn out parts. (Note: unserviceable parts shall be measured and paid seperately herein after.) following parts for serial item above here in before

(a) Gasket set

(b) Screen filter

(c) Cap filter

(d) Barrel and sleeve

(e) Plunger

(f) Main shaft

(g) Techno Shaft

(h) Bush techno shaft

(j) Bushing

(k) Bearing

(l) Gear pump

M&L for taking out radiator assy from existing DG of cap 63 KVA and repair to radiator tank, cleaning complete radiator with anti corrosion chemical, rewelding/ soldering for tubes / tank and refixing complete including replacement of hose pipe set with clamp connected to upper and lower tank for making complete water leak of radiator complete all as specified and directed by Engineer in Charge.

(a) 63 KVA DG Set

(b) 30 to 50 KVA DG Set

(c) 12.5 KVA DG Set

Repair to oil cooler of capacity 63 KVA DG Set Cummins/ Kirloskar diesel engine water cooled with following parts:- (i) Element tube oil cooler- 02 Nos (ii) O' ring-02 Nos (iii) Retainer O' ring-02 Nos (v) Hose-01 set (vi) Clamp hose-02 Nos

M&L for taking out FIP from DG Set of capacity 63 KVA and replace the following items:- (a) Injector nozzles (b) Deliverly valve (c) Bearing (d) Bearing bush (e) Niddle valve-06 Nos & proper calibeation and testing complete and refixing to the DG sets as directed.

Repair with the replacement of following wornout parts of alternator 24 Volts:- (a) replacement of rotor (b) replacement of diode plate (c) rewinding of field winding (d) replacement of bearing (e) Replacement of regulator

Supply and replacement of water circulating pump/ water body suitable for 30 KVA to 40 KVA capacity DG Sets .

Supply and replacement of water circulating pump/ water body suitable for 50 KVA to 63 KVA capacity DG Sets complete all as directed.

Supply and replacement of grooved belt, of following sizes of capacity 12.5 KVA to 63 KVA DG sets

S&F diesel fuel inlet/ oulet, breaded flexible pipe of 20 mm dia. With clamps clips for DG Set any capacity all as specified and directed.

Dismentling the non functional turbo charger for 63 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling, testing and commissioning at site complete all as specified and directed.

Dismentling the non functional turbo charger for 40 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling, testing and commissioning at site complete all as specified and directed.

Dismentling the non functional turbo charger for 50 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling , testing and commissioning at site complete all as specified and directed.

S & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 30/40 KVA complete all as specified and directed. Make- Kirloskar / Cummins after taking out the unserviceable one.

S & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 63 KVA complete all as specified and directed. Make- Kirloskar after taking out the unserviceable one.

S & Replacement of alternator 24 Volt (for charging of battery) for 30 to 63 KVA DG Set complete all as specified and directed. Make Lucas after taking out the unserviceable one.

Taking down the u/s self starter and repairs with rewinding to self starter of capacity 12/ 24 Volt by taking out old burnt out copper winding wire with super enamelled copper wire same gauge including replacement of u/s pinion, bush, solenoid coil, carbon brushes & tension spring complete and the DG Sets and testing consider all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 12.5 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 50 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed.

M&L for replacement filling the Engine Oil DG set complete as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 12.5 complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 50 KVA complete all as specified and directed.

S & F in replacement changerover Switch 200 Amp to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed.

Supply and replacement of solenoid coil, 12/ 24 Volts , DC operated with lead and fixing clamps all as directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 63 KVA DG Set of make Kirloskar/ cummins all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 40 KVA DG Set of make Kirloskar/ cummins all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 12.5 to 30 KVA DG Set of make Kirloskar/ cummins/ Atul Shakti all as specified and directed.

Supply and filling coolant for DG set as per DG set manufacturers recommendations complete all as specified and directed.

M&L for renewal of battery terminal heavy duty made out of brass suitable for 12 V lead acid battery complete all as specified and directed.

M&L for battery lead made up of copper conductor wire of 23/.016 of any length as required at site for various D G Sets complete all as specified and directed.

Supply & filling distilled water in batteries as required at various DG set installations all as specified and directed.

Painting to DG set canopy with spray paint of size 12.5 to 63 KVA after cleaning, srapping and making the surfaces free from rust of main externally and painting with two coats synthetic enamelled paint in black/ blue/ red including marking/ writing on pipe complete as specified and directed..

M/S SHAHABUDDIN AND SONS (BID ID -3069357)

N S ELECTRICALS (BID ID -3071935)

S S ELECTRICALS (BID ID -3069181)

M/S MANSI TRADERS (BID ID -3083908)

M/S CHAUHAN ELECTRIC WORKS (BID ID -3074332)