Upgradation of Ladies Crew rest room & Toilet Block at Sadaramangala Depot, Bengaluru (2nd Call)

Upgradation of Ladies Crew rest room & Toilet Block at Sadaramangala Depot, Bengaluru (2nd Call)

KSRB 2-1.1 Earth work surface excavation in ordinary soil for leveling and lowering the ground manually (other than foundation o buildings, culverts, road drains and trenches of pipe lines and cables...

KSRB 2-2.1 : Earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil ...

KSRB 2.8 Filling in foundation with granite/trap broken metal 100mm and down size with approved sand including hand packing, ramming, watering, including cost of all materials and labour with lead up...

KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix M7.5 with opc cement@180kgs with 40mm and down size graded granite metal, coarse aggregates @ 0.57cum machine mixed, concret...

KSRB 5.2-3 Providing and constructing granite/trap/basalt size stone masonry in foundation cement mortar 1:6, stone hammered dressed in courses not less than 20 cms high, bond stones at two m. apart i...

KSRB 5.3-3 Providing and constructing granite/trap/basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed dressed in courses not less than 15 cms high, bond ston...

KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering ...

KSRB 4.9.2 : Providing TMT steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wi...

KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all mat...

KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, piers, abutments, post and struts, square / rectangular / polygon in plan including cost...

KSRB 4-6.7 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lint...

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thick...

KSRB 4-6.9 :Providing and removing centering, shuttering, strutting,propping etc, for edges of slabs and breaks in floor, cills, plinth including cost of all materials, labour complete as per specif...

KSRB 4.2.1 : Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine ag...

KSRB 4-2.3: Providing and laying in position Reinforced Cement Concrete of mix M25 with OPC cement @ 240 Kgs with 20mm and down size graded granite metal of coarse aggregates @ 0.878 cum and fine agg...

KSRB 4-2.10: Providing and laying in position Reinforced Cement Concrete of mix M-20 with OPC cement @ 24Kgs with 12mm and down size graded granite metal coarse aggregates @ 0.5175 cum and fine aggreg...

KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specificaito...

Providing and construction of stabilized mud block masonry walls with blocks of minimum strength of 35kg/sqcm and laid using 3/4" thick 1:5:5 (Cement : Soil : Quarry dust mixed with lime water) stabil...

KSRB 6-2.2 Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 50 (table moulded) with CM 1:6 for basement and superstructu...

KSRB 6-8.2 : Construction of partition wall 10 cms thick with table moulded modular burnt bricks of class designation 5.0Newton per sqmm with cement mortar 1:4 including providing and fixing plaster m...

KSRB 7.9 Providing and fixing MS grill work for windows and ventilators weighing 21kg/sqm using MS flats, or M.S square rods, or combination of M.S flats and square rods as per approved design, drawin...

KSRB 7.14 : Providing, fabricating, assembling and fixing in position anodized aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the...

KSRB 7.17 : Providing, fabricating, assembling and fixing in position anodized aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thicknes...

KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thi...

KSRB 9.4-3 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement...

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic ...

Providing and fixing of factory made 30mm PVC rigid foam PANEL DOORS Rajashree made from MS Tube of 19 guage size of 19mm x 19mm and convered with heat moulded PVC C channel and width of 50mm to form ...

Providing and fixing PVC Hollow Door Frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 Nos. of 150mm lon...

KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing s...

KSRB15-3-13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffol...

KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing s...

KSRB15-7 : Providing lime rendering for plastering to wall and ceiling , including cost of materials, labour, curing complete as per specifications (Page.115/Item 15.33)

KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing sc...

KSRB 11-2 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ...

Providing and fixing white vitreous china clay surgeon type Wash basin size 660x460mm with a pair of 15mm C.P.brass pillar taps with pair of elbow operated levers, C.I. / M.S. brackets, 32 mm C.P. bra...

Providing stone ware Nahanitrap of approved quality and make confirming to isi speifications, Construction of cistern in m- 15 as per directions wherever necessary (rate includes cost of all materials...

Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, (clear inside dimension) for pipeline, using table moulded non-modular bricks of class designation 50 in CM 1:5, CI cover with...

Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, (clear inside dimension) for pipeline, using table moulded non-modular bricks of class designation 50 in CM 1:5, CI cover with...

Providing and fixing two in one Bib cock 041 JAGUAR- continental make of with all accessories fixing etc., complete as per specifications and directions of the Engineer -incharge of the work.For othe...

KSRB 11-11.7 Providing and fixing 1500x450mm rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour compl...

KSRB 13-6.6-1 Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, labour and HOM of equipments w...

JAGUAR make, cat No.SOL-6357 , Providing and fixing sink cock with regular swinging spout for pantry sinks with all accessories fixing etc., complete as per specifications and directions of the E...

KSRB 13-6.3-2 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 20mm nominal bore including cost of all materials, labour and HOM of equipments with ...

KSRB 13-6.3-2 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments with ...

KSRB 13-6.3-2 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 32 mm nominal bore including cost of all materials, labour and HOM of equipments with...

Providing and laying plat form using prepolished, water cut / gang saw 40mm thick telephonic Black Granite. laid on existing vertical -supports and fixing in CM 1:3 proportion. Including cutting to re...

Providing full nosing of 40 mm th granite slab using req machinery including and conveyance of all materials , labour for all items of work, Hom of equipments etc , complete P- 108/14.53

KSRB 11-17-1: Providing and fixing C.P. brass towel rail 740mm length, 20mm dia with C.P. brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per sp...

KSRB 10-3 : Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc., consisting of following ap...

Providing vitrified tiles 60 x 60cms of(granomite finish) approved make, shade and size for flooring laid on a 12mm thick cement mortar 1:3 mix, flush pointing with white cement using colour pigment, ...

Providing and laying flooring Ruby Red / Hassan green/ Grey/Black granite /Multy red using pre polished 19mm thick water cut/gang saw Granite slab over existing CC bed in 1:4 average 20mm thick pointe...

KSRB4-16 Providing and laying in position plain cement concrete of mix 1:2:4 using 20mm down size KSRB graded granite metal, machine mixed, concrete laid in layers not exceeding 15cm thick well comp...

KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow...

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the sueface even and smoo...

KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brushing the surface, free fr...

KSRB 15-16.1 : Providing and finishing external walls in two coats with waterproof Apex paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all di...

KSRB 15-18.2 : Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and o...

Fabricating, supplying & erecting M.S. angular Truss for all spans as per approved designs and drawing. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support,...

Providing and fixing Chorinated poly venyl chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings in...

Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 6.00 kgf/sq.cm working pressure with pipe fitting, wall clips etc., and making good the wall, ceiling and floor for sanitary pip...

Removal of debries up to 10.0 km including loading and unloading.

Electrical works:-Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...

Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 30...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Ear...

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch

6Amps 3way socket

32Amps DP switch

TV/Telephone socket

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single ph...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm)

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 ...

Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housingLESSER with spring loaded false ceiling clamp...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housingLESSER with spring loaded false ceiling clampsLESSER Power LEDs...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70 percentage lumen maintenance with CRI greater 80. Pow...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires,...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, ...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . ...