Maintenance of Library Building at TMC Colony in Ward No27

Earth work excavation and deposting on bank with an intial lead of 10m& initial liftm of 2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges

Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification

Dismantling the Existing Damaged PCC floor including all cost and conveyance of materials and all labour charges etc., complete

Clean removal of cement plaster from walls including all cost and conveyance of materials and all labour charges etc., complete

Plain cement concrete 1:11/2:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete.asper standard specification.

Brick work in cement 1:5 mix using well burnt country bricks of size 83/4"x41/4"x23/4" including all cost and conveyance etc complete as per std specification

Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification.

Repairing and fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete asper standard specification.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending,welding, grinding, polishing,conveyance electrical charges, etc., complete

Supply, delivery and fixing of UPVC Board including all cost and conveyance etc., complete

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with ceramic tiles siratch proof design of size 305mm x 305mm x 6mm in Cement Mortar 1:3, 20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surface etc complete

Dadooring the walls with glazed square tiles of 150mmx150mmx6mm of the following colour set in cement Mortar 1:2 10mm thick and pointed with white cement @ 0.4Kg/m2 in all floors as directed etc., complete complete complying with standard specification (S.D.261A)

Supplying and fixing door shutters for Medium Density Fibre board (SBG I) of exterior grade of following type with thickness conforming to IS 124406 / 2003 with 35 x 12mm T.W. on all edges with necessary adhesive and C.P Screws,including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for furniture fittings such as 6 nos SS 304 Grade Parliment Hinges of required Size (125mm x 150mm ) 1 no Alu aldrop 250 x 16mm, 2nos Alu tower bolt of 300 x 12mm and 1 no Alu tower bolt of 200 x 12mm , 3 Nos Alu Handles, 2 nos door stopper with rubber bush incase Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less than 15 microns The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidental charges, handling charges etc., complete complying with standard specification and as directed by the departmental officers - Double leaf

Painting Red lead, one coat ( Over Priming Coat,Priming Coat not included in cost ) of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. ( The make , quality and colour of paint should be got approved by the Executive Engineer before use on works )

Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification.

Painting two coats with ready mixed approved paint over old steel surface including cost and conveyance all materials etc. complete asper standard specification.

Supply, delivery of Plastic Chair including all cost and conveyance etc., complete

Supply, delivery of Plastic Table including all cost and conveyance etc., complete

Providing and fixing 110mm dia PVC Rain water down fall pipe eith necessary specials with all cost and conveyance or material cost and all labourcharges etc, complete as per standard specification

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22)

Supply and fixing of 1200mm (48") A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110)

Supply and fixing of 20W 4 Feet LED Fitting with LED

Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/Crompton/K-Lite) suitable for 11W CFL lamp with CFL (SD 83)

Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for Concealed P V C plug point ( S D 36)

Painting and lettering arrangements for using best and approved colour including all cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.