GE/DE-55/2019-2020

Amount

Demolition, Cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5Sqm each and removing to store, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each and removing to store, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but including framed trusses etc complete all as specified and as directed.

Demolition and breaking up drain pipes (salt-glazed stone ware, AC or reinforced concrete) set in cement mortar 150/200mm dia, complete all as specified and as directed.

Excavation in post holes ( or similar holes ) each n.exc 0.5 cum in any type of soil getting out, returing filling in and ramming around in layers not excedding 25 cm, complete all as specified and as directed.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides, complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed.

Removal of excavated material not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point, complete all as specified and as directed.

Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling in and mass concrete, complete all as specified and as directed.

Providing PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundations, filling in and mass concrete, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B- 1 using 20mm graded crushed stone aggregate as in window or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundry pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets etc. (of any indicated section), with plain fair faces, including necessary form work etc., complete all as specified and as directed.

RCC 1:1.5:3 type A-1( using 20mm graded crushed stone aggregate) as in foundations footings, plinth beams etc., complete all as specified and directed.

RCC 1:1.5:3 type A-1( using 20mm graded crushed stone aggregate) as in columns, pillars etc., complete all as specified and directed.

Providing PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channels, complete all as specified and as directed.

Brickwork with sub class `B` bricks, in straight or curved on plan exceeding 6m mean radius, built in CM 1:6 including demolition of old brick masonry built in cement mortar, complete all as specified and as directed.

Brickwork with sub class `B` bricks, in straight or curved on plan exceeding 6m mean radius, built in CM 1:6, complete all as specified and as directed.

18 to 20mm thick Granite slab (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platform and the like, bedded and jointed in cement mortar 1:4 and pointed with white cement with admixture of pigment to match with shade of Granite laid over bedding layer of 15mm thick cement mortar 1:4, fixed in repairs, complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube supplying and fixing in opening as per specification & drawing, complete all as specified and as directed.

Factory made solid PVC moulded door shutter 30mm thick (style ) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and as directed.

100 mm size but hinges medium weight cold rolled mild steel fixed complete all as specified and as directed.

150mm size aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed.

150mm size aluminium anodized, handles cast type, complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel doors and widows with necessary 12mm iron flats with welding, complete all as specified and as directed. (Rates are inclusive of welding and supply of flat iron wherever required)

Aluminium alloy powder coated door frame of section 100 mm x 44 mm x 1.5mm thick,door shutter top rail and both styles of size 100mm x 44 mm x 1.5mm thick,lock rail and bottom rail of size 115 mm x 44 mm x 1.5mm thick incl. aluminum snap beading and rubber packing, & 5.5 mm thick tinted glass/9mm thick both side laminated particle board, incl. 100 mm long alm butt hinges - 04 Nos each leaf, 200 mm long tower bolt, 200 mm long Alm handle- 02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock, & hydraulic door closer heavy duty, complete all as specified and as directed.

Mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats,plates etc., conforming to FE-410W (Gde -E-250) quality B, complete all as specified and as directed.

Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connecte to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to grade Fe-290 (Gde E- 165 quality A), complete all as specified and as directed.

Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., inclusive of steel sheeting 1.00mm thick in covering to doors or other covering, hanging or fastening and fixing complete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Box type Steel ventilators with glazed shutters made out of 16 gauge steel section for frames and shutters as per drg No. TD-A sheet 1/3 to 3/3, with openable glass shutters including pintel hinges 75mm size 12mm dia, 100mm size handles, 150mm size tower bolt and mild steel hook and eye 150mm size, complete all as specified and as directed. (Note : Glass panes shall be measured and paid separately under respective item).

Mild steel TMT bars 10mm dia and over cut to length, bent to shape, including cranking, bending spirally, hooking ends and hooping for columns and binding with mild steel annealed wire not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

TMT bars 5mm dia and over upto and including10mm dia cut to length, in stirrups and spacers including cutting and bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Mild steel framed work as in grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work, complete conforming to Fe 290 Gde-E-165 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Mild steel work such as angle iron post , flat iron in fencing including cutting top to required shape including welding with proper overlapping & welding MS Plate with angle iron bottom as directed, drilling holes notching for wire etc., embedded in concrete fixed vertically conforming to grade FE-290 E-165, complete all as specified and as directed.

Fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugations side lap fixed with coach screws and washers in roofs etc., complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, including taking down old AC corrugated sheets of any thickness, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall/ridge, fixed with self tapping screws, including taking down old AC ridges sheets of any thickness, complete all as specified and as directed.

False celling 4mm thick eco board (Make: Everest) size 595x595mm fixed on GI powder coated Tee or L section (snap grid of GI frame wk of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screw as per manufacturer instructions comprising of the fwg (a) Cross tee size 29x24.7x0.8mm (b) Wall angle 22.2 x 22.2 x 0.65mm (c) two coats of OBD on one side of ceiling boards including cover fillets, complete all as specified and as directed.

50 mm thick plain cement concrete 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in sub base finished even and fair, complete all as specified and as directed.

75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection including finishing the surface even and fair, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set in grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

Pre-polished coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cementy mortar 1:4, complete all as specified and as directed.

Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed

Glazed ceramic tiles in vertical surface 300mm x 450mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:4 on brick/concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Washed stone grit plaster on external walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed

Preparation of newly plastered or unplastered surface of walls and applying three coats of white wash, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coat of cement based paint, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a layer of 2mm thick birla wall care putty finished to a smooth surface, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide complete all as specified and as directed.

Sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve, including dismantling of existing tank, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

15mm bore PVC connection of size 600mm long 15mm bore, fixed in repairs, complete all as specified and as directed.

Tubular towel rail 'D' type 20mm dia, chromium plated brass 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed.

Soap dish, vitreous china 160mm x 160mm x 90mm, fancy type, fixed to walls with chromium plated brass screws, fixed in repairs, complete all as specified and as directed.

Vitreous chinaware counter type wash hand basin (WHB) of size 550mm x 400mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., fixed in repairs, (Make : Jaquar Cat No : KUS-WHT-35901 or equivalent in Parko/Marc) complete all as specified and as directed.

Vitreous china squatting pan ‘Orissa’ pattern size 580 x 440 mm white with integral foot rests including P or S trap including provn of lime concrete bedding including connections to flushing cistern/pipe, fixed in repairs, complete all as specified and as directed.

PVC valve less syphonic action type coloured flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections complete including taking down old unserviceable flushing cistern any type, fixed in repairs, complete all as specified and as directed.

20mm dia stop valve of copper alloy screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union, fixed in repairs, complete all as specified and as directed.

15mm dia Pillar tap of PTMT white colour high pressure screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

15mm dia Angle stop Valve PTMT white colour high pressure screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

Swivel shower rose of PTMT any colour including fixing to steel pipe or union (Minimum weight 40gms), fixed in repairs, complete all as specified and as directed.

Precast SFRC man hole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls an in rain water pipes, fixed in repairs, complete all as specified and as directed.

PVC floor trap, with grating including jointing to 100mm bore waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specified and as directed.

Sand cast iron soil waste and vent pipes 100mm dia, in any length, with cement joints, laid in trenches including necessary excavation and earth work conforming to IS-1729, complete all as specified and as directed.

CI 'Ý' junction single, for 150mm bore, fixed to walls, complete all as specified and as directed.

CI bend for 150mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

Cutting into existing manholes for connecting 150mm bore SGSW pipe to new drains, making good to pipe in cement concrete 1:2:4 type B-1, including cutting into existing benching for and forming branch channel (1/2 round or 3/4 section) smooth finished including rendering, complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) in bed of concrete pipe 150 mm dia including forming cradle after they are laid and tested complete all as specified and directed.

Slat glazed stone ware drain pipes grade 'A' of 150mm bore, laid on concrete bed and jointed in cement joints, complete all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing etc complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push (Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.)

All as per description of Srl item No. 80 here-in-before but for one 3 pin socket outlet 5/6 Amps on same board.

All as per description of Srl item No. 80 here-in-before but for one socket outlet 5/6 Amps on independent board.

All as per description of Srl item No.80 here-in-before but for power socket 15/16 Amp with cable 2.5 Sqmm for phase & neutral for earth 1.5 Sqmm.

Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and as directed.

Replacement of Switch piano flush type, single pole, one way, 5/6 Ampscomplete all as specified and as directed.

Replacement of socket two-in-one, 5 pin, 5/6 Amp universal type complete all as specified and as directed.

Replacement of Switch16 Amp,single pole one way complete all as specified and as directed.

Replacement of socket out let 6/16 Amp, flush typecomplete all as specified and as directed.

Replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

Replacement of LED Mirror light 10/12W diffuser, driver including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of Wall mounting tube light fitting, 20/22 watt including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Replacement of fresh air fan 250 mm sweep plastic body type incuding self closing louver and making all electric connections, complete all as specified and as directed.

Replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed.

Replacement of MCB C Curve type, 10 kA, 40 to 63 Amp, Single Pole with and neutral over load and short circuit protection, complete all as specified and as directed.

Replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections, complete all as specified and as directed. (Note : The cost of removing old wooden box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quoted rate.)

Replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections, complete all as specified and as directed. (Note : The cost of removing old wooden box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quoted rate.)

Replacement of MCCB Incomer fabricated distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating surface mounting, TPN 12 way, 415 volts with bus bar rating 250 Amps, dust and vermin proof and IP 42 - IK 09 protection with and suitable for incorporation of MCB SP & 200 Amps MCCB 4 Pole,complete all as specified and as directed. (Note : 1. The cost of removing old wooden/metal box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quated rate.)

Replacement of MCCB Incomer fabricated distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating surface mounting, TPN 8 way, 415 volts with bus bar rating 250 Amps, dust and vermin proof and IP 42 - IK 09 protection with and suitable for incorporation of MCB SP & 200 Amps MCCB 4 Pole,complete all as specified and as directed. (Note : 1. The cost of removing old wooden/metal box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quated rate.)

Replacement of MCCB Incomer fabricated distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating surface mounting, TPN 4 way, 415 volts with bus bar rating 250 Amps, dust and vermin proof and IP 42 - IK 09 protection with and suitable for incorporation of MCB SP & 160 Amps MCCB 4 Pole,complete all as specified and as directed. (Note : 1. The cost of removing old wooden/metal box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quated rate.)

Replacement of MCCB 4 Pole, 415V, with adjustable thermal and fixed magnetic settings type 160 Amps with breaking capacity 36 KA, complete all as specified and as directed.

Replacement of MCCB 4 Pole, 415V, with adjustable thermal and fixed magnetic settings type 250 Amps with breaking capacity 36 KA, complete all as specified and as directed.

Replacement of change over switch off load type AC, 415 Volts, TPN 250 Amp, side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed.

1100 volt heavy duty cable aluminium standard conductor served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size 25Sqmm ISI marked in service connections, suspended by insulating hanger (not more than 1 mtr apart) including 4 mm suspention wire including taking down old unserviceble cable complete all as specified and as directed.

LT underground cable XLPE insulated, PVC sheathed, galvanised steel strip / wire armoured, aluminium conductor, 1100 volts grade, of size 50 Sqmm 3.5 core suitable for earthed system laid in duct / trench / along pole / wall etc including making connection complete all as specified and as directed. (Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items.)

Mechanical protection to cable using old size sub class 'B' bricks, laid flat, dry, butt jointed, laid length wise perpendicular to the axis of cable, complete all as specified and as directed.

Sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable, complete all as specified and as directed.

Replacement of LED security light luminaire 40 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 65 protection with and including driver/transformer and including connector, complete all as specified and as directed.

Replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Electric water heater storage type of 50Ltrs capacity having 5 Star BEE rating, making all necessary electric and water supply connections including fitings, complete all as specified and as directed.

Earthing complete with GI earth plate electrode 600 mm x 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation, complete all as specified and as directed.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-14,15 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

R. S. Associates

sunil traders

M/s Shubh Enterprises

Vipul Construction

M/S Yamin

GURBAX SINGH AND CO.