REPAIRS/MAINT OF DRAIN CULVERT AND FOOTPATH COURTYARD IN ZONE C AREA AT NDA KHADAKWASLA

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises complete all as directed

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises complete all as directed.

Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quions /archers etc and removing debris from site to outside MoD land complete all as directed.

M&L for precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall all as specified and directed.

M&L for cement concrete (1:2:4), type D-2 (Using 40mm size graded stone aggregates) as in surface channels and drains including finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4) complete all as specicified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitred/stopped end etc complete, all as specified and directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (Using 40 mm size graded crushed stone aggregate) as in floor etc complete all as specified and directed

M&L for 100 mm thick cement concrete (1:2:4), type B-1 (using 20 mm size graded crushed stone aggregate) as in hard standing complete all as specified and directed.

M&L for forming expansion joints 100 mm deep x 12 mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade A.complete all as specified and directed.

M&L for digital durastone tiles designed to provide a high level of durability, strength, and longevity. Made from a blend of natural materials and advanced technology including matt, polished, and glossy finishes with size 600mm x 600mm x 10mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for glossy finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment to match complete, all as specified and directed

M&L for sand layer under floor of interlocking paver tiles incl watering and consolidation complete all as specified and directed.

M&L for glossy finish Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar (1:6) all as specified and directed.

M&L for rough dressed sahabad stone slab flooring (30 mm thick) incl bedded and jointed in cement mortar (1:6) and pointed in CM (1:3) complete all as specified and directed

M&L for PCC 1:2:4 type B1 (20mm size graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and directed.

Dismantling CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed

S&F 0.5mm Pre-painted galvatume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self taping screws as specified and directed.

S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F rolled mild steel in Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E- 165 ) complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation complete all as specified and directed

Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for including cleaning off the premises complete all as directed.

M&L for reinforced cement concrete slabs type B1,(1:2:4) (Using 20mm graded stone aggregate) supported on walls, columns etc complete, all as specified and directed

M&L for TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete, complete all as specified and directed

S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified and directed

Demolition and breaking up of Reinforced cement concrete drain drain pipe set in cement mortor 300mm bore complete as directed.

Supplying and laying 600mm bore Reinforced Cement Concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed

M&L for PCC (1:3:6), type C-2, using 40mm graded stone aggregate as concrete bed to drain pipes of 600mm bore including packing under and haunching against the sides of pipes, after they are laid and tested complete all as specified and directed.

M&L for providing & laying 100 mm thick Cement Concrete with nominal mix (1:1.5:3) tremix concrete and tremix machine and plate vibrator by using 20mm graded coarse aggregates as in floor surface/hardstanding/roads/slabs over drain; finished surface of concrete surface with smooth finish as required without using extra cement etc complete all as specified and directed

Dismantling of stone sett pavings any description or thickness laid bedded pointed in cement mortar in floors, appron etc. complete all as specified and directed

M&L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.

M&L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for plastering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra lime or cement complete all as specified.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for providing plain cement concrete (1:2:4) type B1 (Using 20mm size grade stone aggregates) as in coping including weathering slightly, rounded or chamfered angles and throating and necessary use and waste of form work complete all as specified and directed

M&L for preparing new concrete surfaces , stone, kerb stone surfaces of any description not otherwise over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

DARSHAN ENTERPRISES

M/S, J.K.CONSTRUCTION

Mourya Enterprises

AMW Construction and developers

M/S OMSAI ENTERPRISES

Harish Enterprises

Pranjal Associates