Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC ACCEPTED DUE TO LOWEST | |
| 2 | L2₹16.8 L+₹28,007 (1.69%)Rejected-AOC | L2 | Rejected-AOC REJECTED DUE TO NOT LOWEST | |
| 3 | L3₹19.1 L+₹2.6 L (15.4%)Rejected-AOC | L3 | Rejected-AOC REJECTED DUE TO NOT LOWEST |
Tender Value
₹19.4 L
EMD Value
₹39,000
Closing Date
28 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
ADDITION AND ALTERATION TO BATHROOMS AND TOILETS AT CERTAIN BUILDINGS AT 9 BRD UNDER GE (AF) LOHEGAON AT AIRFORCE STATION PUNE
2022_MES_567019_1
8642/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) LOHEGAON
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LOHEGAON
₹39,000
Yes
3 Feb 2023
2 Dec 2022
4 Jan 2023
2 Dec 2022
28 Dec 2022
16 Dec 2022
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors & pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed.
Taking down door chowkats or frame exc. 1.50 Sqm but n.exc. 4 Sqm each without taking off shutters from the frame complete all as specified and directed.
Taking down door chowkats or frame n.exc. 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S & F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with tinned tackles or stainless steel wire staples complete all as specified and directed.
M&L for forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete new work built in cement mortar 1:4 complete all as specified and directed.
S&F pressed steel door frame of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.
Preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail , panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, & jointed together with solvent cement supplying & fixing in the frame at site as per spacification complete all as specified and directed.
S&F PVC door frame 50x47x5mm thick reinforced MS square tube including 25x6mm MS holdfast etc complete all as specified and directed.
S&F 4 mm frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S & F 100mm Butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section 125 mm long complete all as specified and directed.
S & F 125 mm size Bow handle extruded aluminium alloy fabricated type, anodised complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.
S &F 150 mm size Bow handle extruded aluminium alloy fabricated type, anodised complete all as specified and directed.
S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick plaster backing in cement mortar 1:6 complete all as specified and directed.
M&L Non-skid joints free colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors set and jointed in cement slurry @ 3 Kg/Sqm and pointed in white or colour cement to match existing surfaces including 20mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20 mm dia GI water tubing medium grade fixed to wall / ceiling or laid in floors complete all as specified and directed.
Ditto all as per Ser Item No. 26.00 above but 15 mm dia of pipe complete all as specified and directed.
Demolition of brick or stone masonry built in cement mortor including all quoins, arches pillars etc complete all as specified and directed.
Demolition and breaking up CI/PVC drain pipes 50 to 100 mm complete all as specified and directed.
M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and directed.
Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor complete all as specified and directed.
S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, and Seat and cover for pedestal pan etc. complete all as specified and directed.
S&F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets complete all as specified and directed.
Supply and fix, vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix waste coupling of PTMT (full threaded) (minimum weight 32mm - 45 gms) suitable for wash hand basin complete all as specified and directed.
S&F stop cock 20mm brass complete all as specified and directed.
S&F for Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S & F 15 mm bore angle cock chromium plated capstan head screwed down for iron pipes complete all as specified and directed.
S&F PVC connection 15mm dia sizes with PTMT nuts of length 450 mm complete all as specified and directed.
S & F for PVC (SWR) pipes 110 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F PVC (SWR) pipes 75mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F PVC bend 110mm dia with access door including removing old damaged CI bends complete all as specified and directed.
S & F PVC bend 75mm dia with access door including removing old damaged CI bends complete all as specified and directed.
S & F PVC floor trap with out let 75mm dia plain with grating including jointing complete all as specified and directed.
S & F PVC (SWR) P traps bore 125/110 mm dia complete all as specified and directed.
S & F PVC (SWR) 110 mm dia WC connection of bent type with lip ring complete all as specified and directed.
S & F 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal including removing of old branch piece complete all as specified and directed.
Ditto all as per Ser Item No. 48.00 above but 75 mm bore complete all as specified and directed.
S&F LDPE waste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash basin complete all as specified and directed.
Supply and Fix as in repairs, chromium plated pillar tap 15mm Dia with capstain heads, screwed down high pressure complete all as specified and directed.
M & L for rendering 10 mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth w/o using extra cement with sagol finished complete all as specified and directed.
M & L for rendering 5 mm thick on ceiling in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement with sagol finished complete all as specified and directed.
M & L preparation of newly plastered surfaces of wall and applying 3 coats of white wash over a coat of primer complete all as specified and directed.
M & L preparation of old plastered surfaces of wall and applying 3 coats of white wash over a coat of primer complete all as specified and directed.
M & L preparation of newly plastered surfaces of ceilingand applying 3 coats of white wash over a coat of primer complete all as specified and directed.
S&F Plate (plain or chequered) channels, square cut or notched (ordinary and conter sunk) forming holes, without any attachment of FE 410-W(Gde?E- 250 quality complete all as per specified and directed.
S & F for framed works such as grills grating etc with ends of bars shouldered and / or riveted or forged into spkes, framed guard bards iron doors etc or similar work conforming to Fe-290 G165 complete all as specified and directed.
S & F in repairs Vitreous china urinal, full stall type, white complete all as specified and directed.
S & F 15mm dia urinal push angle valve chromium plated fancy type, screwed down for iron pipes complete all as specified and directed.
M&L 20mm thick Granite (of any type) work(table rubbled and polished) in steps, jambs, pillar, windowcills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S & F in repair 500 ltrs capacity PVC water tank (rectangular with closed top) hoisted and fixed in position complete all as specified and directed.
S & F ball brass valve high presure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm bore of pipe complete all as specified and directed.
S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
greenstone construction
N AND G CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .