GRAMIN UDHYAN VIKASH KARY , GADOLI

150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete. Item As Per PWD BSR Chapter No. B-9 Item No. 9.30

15 से.मी. तक औसत मिटटी काटकर जमीन की सतह को संवारना (Dressing) तथा वनस्‍पती तथा छोटे पौधों को हटाना तथा तुच्‍छ पदार्थ और कुडा करकट को 1.5 मीटर उठान तथा 50 मीटर दूरी तक डालना।

सीमेन्‍ट कांक्रीट नींव या फर्श में 40 मि.मी. नामीय माप की पत्‍थर गिट्टी(crusher broken) / ईट की गिट्टी सीमेन्‍ट-रेत मसाला , 1 सीमेन्‍ट: 5 रेत: 10 मिटटी अनुपात में मिलाकर डालना तथा कूटाई करना, तराई समेत ।

इन्टर लाकिंग सीमेंट कंक्रीट ब्लाक(Grade M-30,Manufactured from fully computerised automatic stationary hydraulic vibropressed machine and batching plant of class A as per BS 6717:2001)से फर्श/सड़क निर्माण मय edge block आपूर्ति व लगाने सहित। edge block नहीं लगाने की स्थिति में 0.08 घ.मी./रनिंग मी. सीमेंट कंक्रीट 1:1.5:3 की दर की कटौती की जावे ।80 mm मोटाई में edge block के अंतर्गत सीमेंट कंक्रीट 1:1.5:3 से बना हुआ अथवा पत्थर का block जिसकी मोटाई 20 सेमी., उंचाई 40 सेमी. होगी व block के टॉप की धार गोलाई में की जावेगी। block के स्थान पर इसी नाप का मोके पर निर्मित block भी स्वीकार्य होगा। मोके पर edge block नहीं लगाने की स्थिति में प्रति रनिंग मी. 0.08 घमी. सीमेंट कंक्रीट की दर से कटोती की जावे ।

सीमेंट कंक्रीट सड़क की ऊपर की सतह पर कंट्रोल्‍ड कंक्रीट मिलाना ,डालना तथा निडिल तथा सतही कम्पन मशीन (वाईब्रेटर) चलाना तथा न खिसकने वाली सतह के लिये , चाहे गए ग्रेड,केम्‍बर तथा सुपर एलिवेशन में तैयार करना 1:2:4 में

45x45x45 सेमी माप के गड्डे करना। कठोर मिट्टी

ikS/ks Ø; dj vkiwfrZ djukA

ulZjh ls o`{kkjksi.k LFky rd ikS/kksa dk ifjogu dk dk;Z 20 fdeh yhM rdA ¼ou foHkkx ch,lvkj½

पौधा रोपण करना। सामान्‍य जमीन

पौधों को उपलब्‍ध पानी पिलाना (15 लीटर प्रति पौधा)।

थांवला बनाना। कम से कम 50 सेमी अर्द्ध व्‍यास का। सामान्‍य जमीन

पौधों की निड़ाई गुडाई करना। 15 सेमी गहराई तक तथा 45 सेमी अर्द्ध व्‍यास तक।

SUPPLY OF WATER TANKER

पौधों की देखरेख एवं रखरखाव करना

नीव, खाई,परनाला में 1.5 गहराई तक मिट्टी की खुदाई करना , तल को कूटना , पानी डालना, बगल को संवारना , खुदी मिट्टी को बाहर निकालना, नीव भरने के बाद खाली स्‍थानों को पुन: मिट्टी से भरना तथा बची हुई मिटटी को 50 मीटर की दूरी तक निस्‍तारण करना

सीमेन्‍ट कांक्रिट नींव या फर्श में 40 मि.मी. नामीय माप की पत्‍थर‍ गिट्टी(crusher broken)/ईट मिटटी , सीमेन्‍ट- रेत मसाला में 1 सिमेन्‍ट : 4 रेत : 8 गिट्टी अनुपात में डालना तथा कुटाई करना , तराई समेत ।

सीमेंट कंक्रीट सड़क की ऊपर की सतह पर कंट्रोल्‍ड कंक्रीट मिलाना ,डालना तथा निडिल तथा सतही कम्पन मशीन (वाईब्रेटर) चलाना तथा न खिसकने वाली सतह के लिये , चाहे गए ग्रेड,केम्‍बर तथा सुपर एलिवेशन में तैयार करना !1:1.5:3 में

नींव तथा कुर्सी प्रथम श्रेणी ईंट की चिनाई सीमेन्‍ट -बजरी 1:6 मसाले में, मय बगल की झिरी बन्‍द करने तथा तराई सहित।

सीमेंट प्‍लास्‍टर दीवार पर 1:6 अनुपात में सीमेंट-बजरी मिलाकर जोड़ों को कुरेदने तथा 14 दिन तक नियमित तराई समेत। 20 मिमी

सफेद रंग के चमकीली चाईना मिट्टी की टाईलों की आपूर्ति करना तथा प्‍लास्‍तर के ऊपर सीमेंट स्‍लरी से लगाना तथा जोड़ों में सफेद सीमेंट लगाना (प्‍लास्‍टर की कीमत शामिल नहीं है)। ग्लेज्ड टाइल्स Size 30 X 45 cm

Add Extra For Pipe Line And Water Supply Work

uhao] [kkbZ rFkk ukyk vkfn ds fy, 1-5 eh- xgjkbZ rd feêh dh [kqnkbZ djuk] ry dks dqVuk] ikuh Mkyuk cxy dks laokjuk] [kqnh feêh dks ckgj fudkyuk uhoa Hkjus ds ckn [kkyh LFkkuksa dks iqu% feêh ls Hkjuk rFkk cph gqbZ feêh dks 50 ehVj dh nwjh rd fuLrkj.k djuk

lhesaV dkadzhV 1 : 2 : 4 vuqikr dh lheaUV dkadzhV dks feykuk Mkyuk ]dwVuk]nckuk] rFkk rjkbZ vkfn lesrA

Surfing Board Providing and fixing of Surfing Board of size not less than 1000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The footrests shall be made from high quality fiber reinforced plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 1. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Widux1750mm. (Height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. The main structure frame shall be made from G.I. pipe minimum of 80N "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB "C" Class G.I. Pipe. The footrests shall be made frem Aluminum casting material of size not less than 130 mm X 310mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvaniz (3:23 pm, 25/02/2022] Prasoon: nuts and bolts shall be used for assembly [3:32 pm, 25/02/2022] Prasoon: used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 Micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete the directions of Engineer-in- charge to fullfil. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

THAI-CHISPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x 1000mm (Width) x 1280mun (Height), to increase mobility of shoulder -elbow and hip-kce. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. High tensile S.S. nut bolts shall be used for assenmbly, The powder coating shall be done with pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fiulfil the functional requirement. The Indicative Design/Photo is as per enclosed Photo no. 3. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

SEATED PULLER Providing and fixing of Pipe hinimuni of SONR "C" elass welded with MS. round base plate atlcast 250 mm & 10mnm thịck, The handle frame shall be miniman 2NB "C" class GL. pine, The seat frame minimum of 32NB "C" Cass . pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High fensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolae Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

LEG PRESS Providing and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 1Omm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness Smm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately).

SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body, The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from "C" class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm, (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 250 mm & Scanned 10mm thick The handle frame shall be made up from aleast 32NBC elass GI pipe. The seats and Back rests to be fined on the outer frames shall be made y of MS. Sheet of tie not less thin 310mm X 300 2mm thickness Closing Cipu thall be made sp of high quality Fiber reinferced Paenic material. H tenole itrel sith galvanized muts & bolts shall he used Rr ssemby The powdr coating chall be done with Pure Polyester pewders from Ackeevhle Berger/ Nerolac Paints with 60 to 79 micren thickness, complete repect including fixing the M.S. holdt in emen concrete e eld the whole structure, under the directions of Engineer-in charge to fullfil the finctional requirement. The indicative Design Photo is as per enclosed Photo no. 7. (The cement vcrete and excavation work thall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

CIRCULAR SWING FOUR SEATER

POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lower limbs, waist and abdomen. The main structure frame shall be made from G.IL pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from "C Class G.I. pipe. Closing Caps shall be thade up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

DOUTLE STANDING TWISTER Providing and fixing of Double Twister Standing of size not less than 1500mm (Length) x 600mm (Width) x 1300mm. (Height), to enhance flexibility of waist. The main structure frame shall be made from G.L pipe minimum of SONB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame is minimum of 25NB shall be made from "C" class G.L. pipe. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 0300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

STANDINGELATING TWISTER Providing and fixing of Scating & Standing Twister of size not leas than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children, The main structure frame shall be made from G.I pipe minimum of 80NB "C class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 N, and 25 NB shall be made from "C" class G.L pipe. The handle frame of Scating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from "C" class G.L pipe minimum of 25mm NB The Twister plate to be fitted on the bottom frame shall be made up of MS. Round Plate of minimum size 300mm diameter and 10mm thickness Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powđer of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in -charge to fillfil the functional requirement. The indicative Design Photo is s per enclosed Photo no. 10. (Thecement concrete and excavation work shall be paid separate. (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

CHEST CUM SHOULDER PRTES Providing and fixing of Chest Press Cum Seated Puller of size not less than 2000mm Length) x 710mm (Width) x 2200mm (Height), to enhanice the strength of upper limbs and the muscles in chest and shoulder. The main structure frame shall be made from G.I. pipe minimum of 8ONB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The seats and Back rests to be fitted on the outer frames shall be made up minimum of M.S. Sheet of size 330 mm X 300 mmX2mum thickness. Closing Caps'vhall be made up of high quality Fiber reinforced Plastic material, High tensile steel with galvanized nuts & bolts shall be used for Assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble/ Berger Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. II (The cement concrete and excavation work shall be paid separately), (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

PUSH UP BARS Providing and fixing of Push Up Bars of size not less than 1220mm (Length) x 550mm (Width) 1700mm. (Height), To enhance the strength and stamina of the body. The main structure frame shall be made from G.L. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The handle frame minimum of 25 NB shall be made from "C" Class G.I. pipe. Closing Caps shall be made up of high quality Fib nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 12. (The cement concrete and excavation work shall be paid separately). (As per Approved by Director WDSC , Jaipur wide Letter No . 6329-443 Dated 04.03.2022)

भराव कार्य हेतु काली पीली मिट्टी की आपूर्ति करना

मिटटी का विभिन्न दूरी के लिए परिवहन सामग्री को चढ़ाना, उतारना व स्टेकिंग सहित | (परिवहन की लम्बाई निकटतम रूट से गणना की जावेगी न कि सड़क मार्ग से) 5.00 कि.मी.

खुदी हुई मिट्टी/रेत को नीव में तथा कुर्सी में 50 मीटर तक दूरी (Lead) में डालना तथा समतल करना , पानी डालना तथा दूरमुट से कुटना।

Supply and installation of precast reinforced, concrete make bench Chair Type with Back Rest of approved pattern, colour & sample, manufactured by using M-30 grade of concrete & reinforced suitably with minimum 0.8% reinforcement and engraving on back rest. The bench consist of 2 nos L - shape base support in prey/cement colour of thickness 80 mm, back height 890 mm & front height 450 mm, base width 620 mm, | nos reinforced concrete planks of size 1500 x 320x 50mm & 1 No. of reinforced concrete plank of size 1500 x 425 x50mm approved colour, all parts are joined together with galvanized nuts and bolts of suitable size. All bolts are sealed after assembly. Seating length of the bench 1500 mm. Seating height of the bench 450 - mm total height of bench 900 - mm." proper curves and finished andpainted with desired shade with water based cement primer complete in all respect inclusive of all taxes, loading unloading at different parks of region as per the direction of EIC.

Please Enable Macros to View BoQ information