GE 874/EWS-72/2023-24

Amount

Dismantling of old unserviceable ACSR conductors from existing PCC/RCC /Steel poles complete all as specified and directed.

Dismantling of old unserviceable insulators any type & any size from pole of PCC/RCC/Steel complete all as specified and directed.

Dismantling of Cross arms of MS channel or angle section etc complete all as specified and directed.

Dismantling street light fitting of any size and type complete all as specified and directed.

Dismantling cable protection pipe 25/40/50/80 mm dia complete all as specified and directed.

Taking out old unserviceable service mains complete all as specified and directed.

Taking out old unserviceable/ broken street light bracket complete all as specified and directed.

Supply and Laying, jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade, cross section area 10 Sqmm 2 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed. Note :-(a) Earth work shall be measured and paid separately.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation , laying of cables/pipes/poles etc., and getting out in hard/dense soil complete all as specified and directed.

All as per item No 9 above but exc 1.50 and n.exc 3.0m deep complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in soft/loose soil complete all as specified and directed.

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid.

Supplying and laying for old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B' designation 75 complete all as specified and directed and testing on completion complete all as specified and directed.

Supply and fixing steel tubes light grade GI tubing 50 mm dia with all fitting laid in trenches complete all as specified and directed.

Supply and fixing street light Engineering plastic one piece moulding control box with locking arrangement made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) including MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar or terminal two Nos (2P-R/Y/B and N) of rating 63 amps for single phase and neutral on porcelain based insulators complete all as specified and directed.

S & F GI bracket made out of GI pipe light grade of size 40/32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete all as specified and directed.

Supply and fixing LED street light luminaries 70/72 Watt having shall be made of single piece Aluminium Die cast with powder coated in RAL-7032 shade with heat distribution fins on housing with UV stabilized toughned glass cover and should have secondary lens on each LED for better light distribution .The system luminaire efficacy should be > 110 LM/W with high power LED LED driver shall be potted and BIS certified with efficiency > 85 % frequency 50 HZ, Operating voltage range 120V-270V,current not more than 0.320 Amp, PF 0.95, THD (I) < 10 %, supported with 5 KV internal and 10 KV external SPD, Humidity 10% to 90 % RH, working temperature - 20⁰ C to 50⁰ C lige expectancy of LED should be 50000 burning hours with minimum 70 % initial lumen maintained, CRI >70 complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable with PVC insulated copper conductor served with an inner sheathing of PVC tape and overall PVC sheathed of size 2.5 sqmm 3 core suitable for LED security light for pole box to street light fitting with connector and thimble, nut & bolt and washer etc., complete all as specified and directed.

M&L for painting to LT poles, 9 mtr with cross arms, bracing and clamps with one coat of synthetic enamelled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole up to 5 feet each strip of 30 cm height complete all as specified and directed.

Supply, fabricate , fixing structural mild steel RS joist , channel angle iron, flat iron and brackets etc for fabrication of cross arms, bracing supports clamps including D clamps, eye hook and back plate etc fabricated from structural steel section including nuts , bolts, washers, welding (cold and hot ) drilling holes for bolts, bend to any shape or size as indicated and directed , inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed.

M&L in replacement of Shackle type, porcelain, vitreous, white, brown or green insulators for working pressure 1100 volts grade, 90 mm dia 75 mm height including galvanized mild steel straps of 31 x 3 mm size, 12 mm dia insulator bolts, washers and nuts complete all as specified and directed.

M&L in replacement of Pin type porcelain vitreous white brown or green insulator including one galvanized mild steel spindle, two galvanized iron, washers and one galvanized iron nut, 100 mm height, 65 mm dia for 1100-volt grade complete all as specified and directed.

M&L in replacement of ACSR conductor of any size and any type including stretching, fixing and binding to insulator on OH LT line service feeders all as specified including aluminium binding wire or aluminium tapes complete all as specified. This item includes all consumables (such as binding wire and replacement insulators and cross arms, etc., for replacement of damaged ones found after/ during replacement process complete all as specified and directed.

Re stretching of LT /HT ACSR conductor and GI wire of any size and on any type of poles carrying up to six conductors in a span including disconnecting from insulator and rewinding to insulator after stretching with and including aluminium wire including re-fixing/re-adjusting line spans, line separators, cross arms on poles complete all as specified and directed.

Supply and fixing for pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, one galvanised iron washers and one galvanised iron nut, 100 mm height, 65mm dia for 1100 (LT) volts grade including taking down old unserviceable pin insulator complete all as specified.

Supply and erect steel tubular swaged poles ISI marked complete with cast iron base plate, final taper plug, bolts, nuts and screw drilling of holes for continuous GI earth wire as specified type 410-SP-31 (09 mtrs long) including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer after preparation of surfaces. complete, with one earthing after every three poles(on the third poles) complete all as specified and directed. Note - Excavation and PCC shall be measured and paid separately).

Supply and erect steel tubular swaged poles erected truly vertical or planted as strut complete with 300 x300x 6 mm thick mild steel base plate, welded to pole, B-118 final, taper cap, bolts, nuts & screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II. type 410 SP-55 (11.0 metres long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint internally & portion embedded in concrete, making five black & red bands at lower portion of pole each 300mm wide alternately, and making pole No. with black paint at suitable height all as specified and directed.

Supply and fixing in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply, installation connecting electrically and testing of street light junction box size 200x160x150mm, pole mounted made out of CRCA sheet 2 mm thick , powder coated having door with magnetic lock complete with bus bar 4 Nos suitable for 3 phase 4 wire supply system, made of aluminium strip of size 20X3mm, one single pole MCB, 240 volts 'C' Curve type, 6 Amps with rupturing cap 10 KA, including fixing arrangement made of MS FI Clamps of requisite size nuts, bolts and washers complete, all as specified and directed.

M&L for Security light bracket made of GI tubing 50 mm dia light grade 1.2 mtr long bend to shape suitable for above mentioned street light fitting with fix to pole with the help of flat iron clamp of size 40x6 mm two numbers with the help of nuts and bolts for fixing of street light fitting with one coat of red oxide and two coat of aluminium paint complete, all as specified and directed.

Supply and fix of on load change over switch 415 volt in sheet metal enclosure 3/4 pole of capacity from 63 Amp with sheet metal enclosure complete all as specified and directed.

Material and Laying for Cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in pole coping (coping to be of .6 m tall and 0.6 m in dia) and stay assembly complete all as specified and directed.

Material and Laying for Cement concrete in foundation filling for Pole using 40mm graded stoen aggregate, 1:4:8 type C-2, 0.6m x 0.6m x 1.65m complete all as specified and directed.

M&L for cement concrete for coping in 20mm graded aggregate 1:3:6 type C-1 complete all as specified and directed.

M & L for stay assembly complete with accessories 16 mm dia electrical plate No.1 (loop type insulator, stay clamps complete all as specified and directed. Note:- Excavation and earth work and concrete shall be measured and paid separately.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

Supply, laying, commissioning and testing XLPE insulated, armoured heavy duty electric cable of size 240 Sqmm 3.5 Core with aluminium conductor, 1100 volts grade, laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old unserviceable damaged cables complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE /(ABC), armoured, Aluminium conductor cable of size 95 Sqmm to 240 sqmm complete all as specified and directed.

Supply and fixing copper thimble of size 120 to 240 Sqmm, complete all as specified and directed.

M&L for painting to HT/LT poles 11 mtr with cross arms, bracing and clamps with one coat of synthetic enamelled paint over one coat of red oxide primer including scrapping the old paint carefully to make smoothen complete and painting strips of red and black from foot of pole upto 5 feet each strip of 30 cm height all as specified and directed.

Supply and installation, testing and commissioning pumping set submersible multi stages min 16 stage suitable for 50mm dia pipe complete with electric motor suitable for three phase 300 to 415 Volt 50HzAC Size not less than 7.5 KW/10HP suitable for 200mm dia borewell and having discharge capacity (head range 228m-95m) Discharge range 80 L /min -220 L complete stainless steel pump shaft and S.S impellers including of suitable safety steel wire rope with grip clamps at both ends from motor to casing cap above ground level and supply and fixing of casing cap 200mm dia highly tempered with (MS-AN4Z) grade made out of MS Sheet 3mm thick and fixing with MS Clamps 50 x 6 mm FI with nuts, bolts and washers complete in all respect all as specified and directed.

Supply and fixing fully automatic Star Delta starter for 25 HP Submersible Pump Set Complete all as directed.

Supply, Laying & testing Flat three core PVC insulated & PVC Sheathed Industrial cables for Submersible Pump Motors 10Sqmm 3 Core ,1100 Volts grade complete all as directed.

3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Material and labour earthing complete with galvanized steel earth plate electrode 60cm x60cm x6.00 mm thick buried directly in ground vertically in ground (earth pit not less than 2.25 meter deep below ground level ) with top edge of the earth plate not less 1.5 mtr below normal ground level,

connected to galvanise earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and thimble and other ends of the earth strip connected to main panel and protected by galvanized iron pipe light grade 40 mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, PCC 1:3:6 type C-I using 20mm graded stone aggregate with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel with wire gauge of (0.68) 8 mesh per liner inch , 80mm thick RCC pit cover 320mm x 320mm of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with XLPM,JALLI and char col dust and common salt as shown in electrical plate No3 of MES SSR Part -1 and specified including provision of earth wire protected by 40mm medium grade GI pipe , and watering pipe shall be 20mm bore medium graded GI pipe and including all excavation and earth work & Connecting the earthing to an earthing test point /transformer neutral/body /LT Panel etc and testing on completion complete all as specified and directed. Note : The quoted rate of earthing shall be deemed to included cost of 7.5m long galvanised earth strip 32 x 6mm and protection pipe of 40mm Bore medium graded ,GI light graded 20mm Bore watering Pipe .

Excavation in post holes (or similar holes ) each not exc 0.50 Cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 as in foundation of Posts and Struts complete all as specified and as directed.

M&L for mild steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips for chain link fencing with post complete all as specified and as directed.

M&L for FI (Flat Iron) 40x6mm for fixing chain link fencing with RCC Post and MS round bar 10mm dia for inserting in mesh including hooking etc complete all as specified and as directed

S&F 10mm dia 40mm long MS screw bolt machine made ith hexagonal or square head at one end and screwed the other, or both ends each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified

S&F Galvanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails including securing or tying with and provision of galvanised MS wire staples or steel pins etc complete all as specified and as directed.

Supply only chain link fencing, galvinished mild steel or mesh 100 x 100mm size, 10 gauge complete all as specified and as directed. Note:- Cost of fixing shall be deemed to be included in the quoted rates of item No. 54.

Fixing only cjhain link fencing, including the wires 100 x 100 mesh, 10 gauge galvanised mild steel to any type of standards, rails, straining bolts etc complete all as specified and as directed.

M&L preparation of new steel/ iron surface and applying two coats of synthetic enamel paint over red oxide, over 10cm width/girth complete all as specified and as directed.

M&L preparation of new steel/ iron surface and applying two coats of synthetic enamel paint over red oxide, not exc 10cm width/girth complete all as specified and as directed.

S&F mild steel work as in ISA 75 x 75 x 10mm as in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc conforming to Fe 410 or Fe 310 complete all as specified and as directed.

M&L preparation of new steel/iron surfaces and applying two coats of black bituminous paint complete all as specified and as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

Surface excavation not exc 30 cm deep and average deep and getting out in any type of soil complete all as specified and as directed.

M&L for 150mm size soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

Rolling and consolidation formation surface in cutting with roller 8 to12 tonne complete all as specified and directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65 mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates as in sub base to floor/path/hardstanding etc. complete all as specified and directed.

Removing excavated material and depositing where directed at a level n. exc. 1.5 m above the starting point beyond 50m and up to a total distance of 1 Km complete all as specified and directed.

Kesar Impex

patriotic builders

m/s mohd saleem and co

POPULARHARDWARESTORE

GH MOHD SHAH AND CO

Bidder Name

patriotic builders

POPULARHARDWARESTORE

GH MOHD SHAH AND CO

Kesar Impex

m/s mohd saleem and co

M/S MOHD MAQBOOL RATHER