Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.5 LAccepted-AOC 00 HAIDARPUR JAMALPUR ROAD SADAR JAUNPUR UTTAR PRADESH 222001 | JAUNPUR | UTTAR PRADESH | 222001 | 1 | Accepted-AOC Quoted amount accepted being reasonable and L1 bidder. | |
| 2 | 2₹19.0 L+₹2.0 L (11.6%)Rejected-Finance VILL MANKAR NORTH RAIPUR PO MANKAR DISTT PURBA BARDHAMAN PIN 713144 WB | MANKAR | PURBA BARDHAMAN | WB | 713144 | 2 | Rejected-Finance More than L1. | |
| 3 | 3₹24.0 L+₹7.0 L (41.3%)Rejected-Finance PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | 3 | Rejected-Finance More than L1. |
| Sl No | Description | Qty | Unit | ROY ENTERPRISE L3 | M/S. R.K. ENTERPRISES L1 | M/S ABHINABA ENTERPRISE L2 |
|---|---|---|---|---|---|---|
| 1.00 | M & L for disconnecting the electric connection and dismentling to the existing old LT panel board of any size and keeping aside in safe custody / deposoting to MES store yard including its accessories as schedule of credit to contractor or as directed by Engneer-in-Charge. | 3 | Each Job | 1,000 ₹3,000 Lowest | 4,500 ₹13,500 | 3,000 ₹9,000 |
| 2.00 | M&L for Varmin dust proof LT junction box outdoor type of suitable size(450mm x450mm x 300mm) made out of MS sheet 3 mm (Minimum) thick, , powder coated (seven tank process) , rear and front operated door with locking arrangement , suitable aluminium busbar 200 Amp and including fixing arrangements on angle iron base suitable for pedastal mounting of size 50x50x5 mm for connecting cable on both side at least 2 feet height from GL as specified and directed | 4 | Each Job | 20,000 ₹80,000 | 18,000 ₹72,000 | 15,000 ₹60,000 Lowest |
| 3.00 | Design, Fabrication, Testing & Commissioning of Varmin dust proof LT Feerder Pillar board outdoor type of suitable of size (1200mm x 1000mm x400mm) made out of MS sheet 3 mm(minimum) thick, Type tested conforming to IEC 61439, powder coated (seven tank process) , rear and front operated door with locking arrangement , suitable aluminium busbar (400 Amp) and fixed on angle iron base suitable for pedastal mounting of size 50x50x5 mm at least 2 feet above GL to accomodating the following :-
INCOMING :-
(a) MCCB 250 Amps, 4 pole, 25 KA - 01(in coming)
OUTGOING :-
(b) MCCB 63 Amps, 4 pole, 16KA - 04Nos (out going)
(c)MCCB 100 Amps, 4 pole, 16KA - 01Nos (out going)
(d)Digital Multi-functional Meters for measuring current, voltage and frequency,Power including CTs of suitable rating and class
Note : The rate also inclusive of all material mentioned from sl no (a) to (d) and P.C.C foundation etc complete. | 1 | Each Job | 1,45,000 ₹1,45,000 | 1,25,000 ₹1,25,000 Lowest | 1,39,000 ₹1,39,000 |
| 4.00 | Design, Fabrication, Testing & Commissioning of Varmin dust proof LT Feerder Pillar board outdoor type of suitable of size (1200mm x 1200mm x400mm) made out of MS sheet 3 mm(minimum) thick, Type tested conforming to IEC 61439, powder coated (seven tank process) , rear and front operated door with locking arrangement , suitable aluminium busbar (200 Amp) and fixed on angle iron base suitable for pedastal mounting of size 50x50x5 mm at least 2 feet above GL to accomodating the following :-
INCOMING :-
(a) MCCB 250 Amps, 4 pole, 25 KA - 01(in coming)
OUTGOING :-
(b) MCCB 100 Amps, 4 pole, 16KA - 01Nos (out going)
(c)MCCB 63 Amps, 4 pole, 16KA - 06Nos (out going)
(d)Digital Multi-functional Meters for measuring current, voltage and frequency, power including CTs of suitable rating and class
Note : The rate also inclusive of all material mentioned from sl no (a) to (d) and P.C.C foundation etc complete. | 1 | Each Job | 1,45,000 ₹1,45,000 | 1,35,000 ₹1,35,000 Lowest | 1,45,500 ₹1,45,500 |
| 5.00 | Design, Fabrication, Testing & Commissioning of Varmin dust proof LT Feerder Pillar board outdoor type of suitable of size (1200mm x 600mm x400mm) made out of MS sheet 3.15 mm thick, Type tested conforming to IEC 61439, powder coated , rear and front operated door with locking arrangement , suitable aluminium busbar (400 Amp) and fixed on angle iron base suitable for pedastal mounting of size 50x50x5 mm at least 2 feet above GL to accomodating the following :-
INCOMING :-
(a) MCCB 250 Amps, 4 pole, 25 KA - 01(in coming)
OUTGOING :-
(b) MCCB 63 Amps, 4 pole, 16KA - 05Nos (out going)
(c)MCCB 32 Amps, 4 pole, 16KA - 05Nos (out going)
(d)Digital Multi-functional Meters for measuring current, voltage and frequency , power including CTs of suitable rating and class
Note : The rate also inclusive of all material mentioned from sl no (a) to (d) and P.C.C foundation etc complete. | 1 | Each Job | 1,35,000 ₹1,35,000 Lowest | 1,35,000 ₹1,35,000 Lowest | 1,53,930 ₹1,53,930 |
| 6.00 | M&L for PCC 1:2:4 type C2 using 20mm graded for padestal coping incl necessary formwork finished fair using extra cement complete all as specified and directed. | 0.5 | Cum | 7,000 ₹3,500 | 8,500 ₹4,250 | 5,800 ₹2,900 Lowest |
| 7.00 | M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground( earth pit not less than 2.25 mtrs deep below normal ground level )with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI wire 4mm by means of GI nuts, bolts check nuts and washers earth lead protected by 15mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown in electrical plate No 3 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GI watering pipe 20mm dia med gde ,wire mesh, protection pipe 15mm dia GI pipe medium grade for earth lead upto 7.50m long complete . | 2 | Each Set | 6,500 ₹13,000 Lowest | 9,500 ₹19,000 | 7,000 ₹14,000 |
| 8.00 | M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground( earth pit not less than 2.25 mtrs deep below normal ground level )with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI strip of size 32 x 6mm by means of GI nuts, bolts check nuts and washers earth lead protected by 40mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown in electrical plate No 3 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GI watering pipe 20mm dia med grade ,wire mesh, protection pipe 40mm dia GI pipe medium gde for earth lead upto 7.50m long complete . | 3 | Each Set | 6,500 ₹19,500 Lowest | 9,500 ₹28,500 | 7,000 ₹21,000 |
| 9.00S&F in replacement, connect, test and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) including taking out old U/S cable all as directed by the Engr-in-Charge. | ||||||
| 9.01 | 120 Sqmm x 3.5 core | 120 | RM | 1,052 ₹1,26,240 | 750 ₹90,000 Lowest | 1,057 ₹1,26,840 |
Tender Value
₹19.8 L
EMD Value
₹40,000
Closing Date
10 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) PANAGARH
HQ CWE AF PANAGARH MILITARY ENGINEER SERVICES AIR FORCE STATION ARJAN SINGH PO BIRUDIAH DIST BURDWAN WEST BENGAL PIN 713148
REPAIR REPLACEMENT MAINTENANCE OF LT SYSTEM AND ALLIED WORKS AT AF STATION ARJAN SINGH UNDER GE AF PANAGARH
2025_MES_724694_1
83105/PAN/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AF PANAGARH
As per NIT and Tender Documents
8 documents required · 8 mandatory
₹500
GE AF PANAGARH
₹40,000
Yes
24 Sept 2025
5 Aug 2025
12 Sept 2025
5 Aug 2025
10 Sept 2025
22 Aug 2025
Amount
M & L for disconnecting the electric connection and dismentling to the existing old LT panel board of any size and keeping aside in safe custody / deposoting to MES store yard including its accessories as schedule of credit to contractor or as directed by Engneer-in-Charge.
M&L for Varmin dust proof LT junction box outdoor type of suitable size(450mm x450mm x 300mm) made out of MS sheet 3 mm (Minimum) thick, , powder coated (seven tank process) , rear and front operated door with locking arrangement , suitable aluminium busbar 200 Amp and including fixing arrangements on angle iron base suitable for pedastal mounting of size 50x50x5 mm for connecting cable on both side at least 2 feet height from GL as specified and directed
Design, Fabrication, Testing & Commissioning of Varmin dust proof LT Feerder Pillar board outdoor type of suitable of size (1200mm x 1000mm x400mm) made out of MS sheet 3 mm(minimum) thick, Type tested conforming to IEC 61439, powder coated (seven tank process) , rear and front operated door with locking arrangement , suitable aluminium busbar (400 Amp) and fixed on angle iron base suitable for pedastal mounting of size 50x50x5 mm at least 2 feet above GL to accomodating the following :- INCOMING :- (a) MCCB 250 Amps, 4 pole, 25 KA - 01(in coming) OUTGOING :- (b) MCCB 63 Amps, 4 pole, 16KA - 04Nos (out going) (c)MCCB 100 Amps, 4 pole, 16KA - 01Nos (out going) (d)Digital Multi-functional Meters for measuring current, voltage and frequency,Power including CTs of suitable rating and class Note : The rate also inclusive of all material mentioned from sl no (a) to (d) and P.C.C foundation etc complete.
Design, Fabrication, Testing & Commissioning of Varmin dust proof LT Feerder Pillar board outdoor type of suitable of size (1200mm x 1200mm x400mm) made out of MS sheet 3 mm(minimum) thick, Type tested conforming to IEC 61439, powder coated (seven tank process) , rear and front operated door with locking arrangement , suitable aluminium busbar (200 Amp) and fixed on angle iron base suitable for pedastal mounting of size 50x50x5 mm at least 2 feet above GL to accomodating the following :- INCOMING :- (a) MCCB 250 Amps, 4 pole, 25 KA - 01(in coming) OUTGOING :- (b) MCCB 100 Amps, 4 pole, 16KA - 01Nos (out going) (c)MCCB 63 Amps, 4 pole, 16KA - 06Nos (out going) (d)Digital Multi-functional Meters for measuring current, voltage and frequency, power including CTs of suitable rating and class Note : The rate also inclusive of all material mentioned from sl no (a) to (d) and P.C.C foundation etc complete.
Design, Fabrication, Testing & Commissioning of Varmin dust proof LT Feerder Pillar board outdoor type of suitable of size (1200mm x 600mm x400mm) made out of MS sheet 3.15 mm thick, Type tested conforming to IEC 61439, powder coated , rear and front operated door with locking arrangement , suitable aluminium busbar (400 Amp) and fixed on angle iron base suitable for pedastal mounting of size 50x50x5 mm at least 2 feet above GL to accomodating the following :- INCOMING :- (a) MCCB 250 Amps, 4 pole, 25 KA - 01(in coming) OUTGOING :- (b) MCCB 63 Amps, 4 pole, 16KA - 05Nos (out going) (c)MCCB 32 Amps, 4 pole, 16KA - 05Nos (out going) (d)Digital Multi-functional Meters for measuring current, voltage and frequency , power including CTs of suitable rating and class Note : The rate also inclusive of all material mentioned from sl no (a) to (d) and P.C.C foundation etc complete.
M&L for PCC 1:2:4 type C2 using 20mm graded for padestal coping incl necessary formwork finished fair using extra cement complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground( earth pit not less than 2.25 mtrs deep below normal ground level )with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI wire 4mm by means of GI nuts, bolts check nuts and washers earth lead protected by 15mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown in electrical plate No 3 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GI watering pipe 20mm dia med gde ,wire mesh, protection pipe 15mm dia GI pipe medium grade for earth lead upto 7.50m long complete .
M&L Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground( earth pit not less than 2.25 mtrs deep below normal ground level )with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI strip of size 32 x 6mm by means of GI nuts, bolts check nuts and washers earth lead protected by 40mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown in electrical plate No 3 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GI watering pipe 20mm dia med grade ,wire mesh, protection pipe 40mm dia GI pipe medium gde for earth lead upto 7.50m long complete .
S&F in replacement, connect, test and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) including taking out old U/S cable all as directed by the Engr-in-Charge.
120 Sqmm x 3.5 core
95 Sqmm x 3.5 core
70 Sqmm x 3.5 core
35 Sqmm x 3.5 core
25 Sqmm x 3.5 core
16 Sqmm x 4 core
Note for Item no. 9.01 to 9.06 (i) The contractor shall purchase the cable directly from the company or Authorised dealer of company. The contractor shall first intimate the authorised dealer to AGE(I)/GE. The AGE(I)/GE shall verify the dealer from company and after the approval given by AGE(I)/GE the contractor shall purchase the cable. (ii) The contractor shall submit original purchase voucher for payment.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in any type of soil complete all as specified and directed..
Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as directed by Engr-in-Charge
Removing excavated materials/Soil (any type) not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.
Supply and speading fine river sand in trenches for cushioning of under ground cable all as directed by engr-in-charge at site Note:- Only puned thickness shall be measured for payment.
Supply and lay in trenches brick, common burnt in clay, building brick, sub class 'B' designation 75 for cable protection all as specified and directed by the Engr-in-Charge.
Supply and fixing in replacement for GI protection pipe light grade for cable protection incl all fittings laid in trenches or fixed on pole all as specified for 50 mm dia complete all as specified and directed.
M&L for boring of holes under road, pavement, hard standing by trenchless technology/manual excavation as necessary including machine ,tools etc as per site requirment.
M& L for Repacement of unserviceable existing wiring of LT Panel/APFC Panel and wiring with new copper wiring 2.5/4 sqmm with copper lugs epoxy insulator bar and insulating the bus bar with tape conforming with colour code complete all as specified & directed.
Supply only the following items:- ( to be incorporated under item No : 17 above)
2.5 sqmm single core unsheathed copper cable
4 sqmm single core unsheathed copper cable
6 sqmm single core unsheathed copper cable
Copper lugs of suitable size
DMC resin/Red polyamide type Epoxy insulator bus bar connector/supporter of suitable size/dimension
LT Panel Locking set
Supply and fixed in repairs for 3 Ph ammeter digital type 3.5 digit displayt 0-500A range squre shape witch CT Coil fixed to existing LT Panels complete all as specified and as directed.
Supply and fixed in repairs for 3 Ph Voltmeter digital type 3.5 digit displayt 0-500V range squre shape with PT Coil fixed to existing LT Panels complete all as specified and as directed.
Supply and fixing in repair, connecting, testing and commissioning MCCB in panel etc. MCCB, TPN (4 Pole), 160Amps, 25kA breaking capacity with overload and thermal tripping feature, 415Volts AC, 50Hz, ICU = 100%, including certain addition or alteration if required at site complete all as specified and directed.
Supply and fixing in repair, connecting, testing and commissioning MCCB in panel etc. MCCB, TPN (4 Pole), 100Amps, 18 kA breaking capacity with overload and thermal tripping feature, 415Volts AC, 50Hz, ICU = 100%, including certain addition or alteration if required at site complete all as specified and directed.
Supply and fixing in repair, connecting, testing and commissioning MCCB in panel etc. MCCB, TPN (4 Pole), 63Amps, 18 kA breaking capacity with overload and thermal tripping feature, 415Volts AC, 50Hz, ICU = 100%, including certain addition or alteration if required at site complete all as specified and directed.
M & L for cutting the burnt out aluminium lugs and relugging of LT cable in cable end box of transformer on switches including cutting existing lugs suitable for cable of size 70 to 185 sqmm and reconnection after repair work and testing etc complete all as specified and directed. Note: The cost of the liftings/relaying of cable whereas required for relugging is deemed to be inclusive in the unit rates quoted by the tenderer against that item.
Material and labour for straight through joints (epoxy type) for LT PVC / XLPE insulated armoured aluminium conductor cable including jointing and testing etc for the following size :- Make : 3M/M-seal/Denson/Raychem etc Note : (i) Cutting of faulty cable/ joint is deemed to be included in the above quoted rates. (ii) If old burnt/damaged LT cable/joint retrived will be issued to contractor as schedule of credit.
6 sqmm to 16 sqmm 4 core / 3.5 core
25 sqmm to 50 sqmm 3.5 core
70 sqmm to 120 sqmm 3.5 core
M & L for Painting of LT Panels of any size/dimension by prepration of old painted surfaces, cleaning refixing panel board door with hinges,nut bolts etc removing of existing rust grease oil spot etc,priming with aluminium red-oxide and then applying 1st grade of synthetic enamelled spray paint (two coat) of approved make, brand and colours (includes cost of paint) & foundation and painting names of the distribution location complete.all as directed by Engineer-in-Charge.
M&L for danger notice plate of 1.6 mm thick mild steel sheet vitreous enameled white with letter, figures and conventional skull & bones in signal red colour & fixed with MS clamps, bolts, nuts of size 20 x 15cm for LT supply including taking out old unsv rusted out danger plates.
Repair/maintenance/servicing of 110 V DC Float cum Battery Boost Charger testing of control wiring, indicator Lamp ,voltmeter,ammeter,fuse all as specified and as directed by Engr in Charge.NOTE : (a) Cost of minor spares such as lugs, fuses, LED indicator lamps, cotton waste for cleaning, wire for control wiring deemed to be included in the quoated rates.
Supply only auto /Manual Charging Mother Board for (FBFC)
Repair/maint/servicing of voltage stabilizer servo controlled of capacity 630 KVA suitable for AC supply, 415 Volt, 50 C/s, 3 phase, ( input 340 volt to 460 Volt) testing of control wiring, indicator Lamp ,voltmeter,ammeter,suction switch, terminal bush,carbon bush,gaskit all as specified and as directed by Engr in Charge.NOTE : (a) Cost of minor spares such as lugs, fuses, LED indicator lamps, cotton waste for cleaning, wire for control wiring deemed to be included in the quoated rates.
Repair/maint/servicing of voltage stabilizer servo controlled of capacity 100 To 200 KVA suitable for AC supply, 415 Volt, 50 C/s, 3 phase, ( input 340 volt to 460 Volt) testing of control wiring, indicator Lamp ,voltmeter,ammeter,suction switch, terminal bush,carbon bush,gaskit all as specified and as directed by Engr in Charge.NOTE : (a) Cost of minor spares such as lugs, fuses, LED indicator lamps, cotton waste for cleaning, wire for control wiring deemed to be included in the quoated rates.
Supply only Servo voltage stablizer control card
M&L for servicing, cleaning of automatic power factor panel upto 200 KVAr, 440V capacity installed at various locations of E/M installations by opening, disconnecting electrical connections, testing of control wiring, capacitors, contactors including auxilary units, APFC meter of any steps systems, indicator lamps, voltmeter, ammeter, CT's, HRC fuses etc complete and replacing the faulty spares of APFC panel with new spares of equivalent specifications / ratings as existing or as specified or directed by Engineer-in-Charge. NOTE : (a) Cost of minor spares such as lugs, HRC fuses, LED indicator lamps, cotton waste for cleaning, wire for control wiring deemed to be included in the quoated rates. (b) Cost of Capacitors, contactors, voltmeter, ammeter will be measured and paid separatly under respective Sch 'A' item.
Supply only capacitor metalised poly propylene heavy duty cylindrical type (gas filled) for 3 phase 440 Volt & 50 Hz system of operating losses 0.35W/kVAr and having 1.8 times over current withsatnd capacity of rated current of capacity 5 to 15 kVAr.
Supply only capacitor metalised poly propylene heavy duty box type (resin filled) for 3 phase 440 Volt & 50 Hz system of operating losses 0.35W/kVAr and having 1.8 times over current withsatnd capacity of rated current of capacity 20 kVAr to 50 kVAr
Supply only power contactor 3 pole confirming to IS/IEC 60947-4-1 & IEC 60947-4-1 for APFC Panel.
M&L for fault finding of UG LT cable by portable LT fault detector (1.1 /0.430KV line) and showing the fault/short circuit distance from either end without excavating UG cable or removing cable from ground, not exeeding testing 1.0 KM running cable, complete all as specified and as directed by Engrs-In-Charge.
Schedule of Credit
M/S ABHINABA ENTERPRISE (BID ID -3407747)
ROY ENTERPRISE (BID ID -3420911)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .