EEE-III/RZ/NZ/TC/2021-22/15.1

Amount

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group C

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amp switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet

Supply and fixing 3mm thick phenolic laminated sheet i/c cutting of sheet, bolt and washer etc as required.

S/D following size of FRLS PVC insulated copper conductor 1 core cable in existing surface/recessed /PVC/ Steel conduit as reqd. (a) 3x2.5 sq mm

(b) 6X2.5 sq mm

(c) 3X 4 sq mm

(d) 3X 6 sq mm

Supplying and fixing metal box of 180mmx100mmx60mm deep (normal size) of surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 6pin,5/6 amps and 15/18amps socket outlet and 15/18amps piano type switch connection painting etc as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a)12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(A) 63 amps

Laying of one no. PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of following size in the existing masonry open duct as required. Upto 35 sq.mm

Laying of one no PVC insulated and PVC sheathed/XPLE Al Conductor armoured power cable of 1.1KV grade of following size on wall surface as required. Up to 35 sq,mm (clamped with 1mm thick saddle)

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.180 mm X 100 mm X 60 mm deep

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(a) 100Amp,18KA,TPMCCB

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supply of 2x25 mm2 XLPE insulated and PVC sheathed armoured cable of 1.1KV grade conforming to IS 7098 part-1 as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Supply of 1200mm sweep 50 watt , Energy saverISI marked BEE 5 Star rating AC Ceiling fan suitable for 230 V,50 hertz AC supply wihout regulator with blades, down rod etc complete as required.

Supply of 15" (380mm ) sweep.1400 rpm exhaust fan heavy duty complete with shutter, blades etc as required

Supply, installation ,testing & commissioning of LED Tube type luminaire 20 watt rating complete with Extruded Aluminium Batten prewired with high efficient LED with the foolowing: ( a) Total system wattage 20 watt +/- 5% (b) Luminous efficacy lumens /watt >=95 (c) Power factor > = 0.95

SITC of 60 watt LED street light luminaire fitted with lens made of pressure die casting aluminium housing & toughened glass cover with following specification & fixing on existing pole complete with connections as reqd (a) Total system wattage =60 watt + 5 % (b) luminous efficacy > 95 lumens/watt (c) Power factor = > 0.9 (d) Protection level - IP 66

Supply and fixing of 32mm dia G.I.Pipe(Medium Class) 1Mt.long bracket i/c wiring with 2.5 sq.mm copper conductor wire as reqd.

P/f of hot press sheet moulded compound (SMC) fire retardent (temp. resistance upto 200 C) , IP-55 weather proof pole box of inner dimention 200 mm X 160 mm X 98 mm (NS) complete with suitable arrangement for fixing 2 nos.6 to 32 amp SP MCB & 63 Amp Double pole isolator (MCB/ Isolator excluded) with neutral link duly shorting on DIN Channel with 2 nos. MS clamps arrangement with SS back plate of suitable size with Danger plate, Monogram & North DMC property printed on the cover etc. as required.