Internal repair and renovation of Sarv Swashtya Kendra at Sector-9 Bokaro

GRAND TOTAL 4942424.21

Providing and laying cement concrete in retaining walls, return

walls, walls (any thickness) including attached pilasters, columns,

piers, abutments, pillars, posts, struts, buttresses, string or lacing

courses, parapets, coping, bed blocks, anchor blocks, plain window

sills, fillets, sunken floor etc., up to floor five level, excluding the cost

of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse

sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

2 Centering and shuttering including strutting, propping etc. and

5.9.4 removal of form for : sqm 54 927.25 50071.5

Shelves (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth

level. Thermo Mechanically Treated bars of grade Fe-500D or more

Brick work with clay flyash F.P.S. (non modular) brick of class

6.32.2 designation 7.5 in superstructure above plinth level up to floor five cum 55 9095.05 500227.75

level in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area

2.5 sq.meters and under, including cutting the patch in proper

14.1.1. shape, raking out joints and preparing and plastering the surface of sqm 100 547.40 54740

the walls complete, including disposal of rubbish to the dumping

ground, all complete as per direc on of Engineer in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

15.7 Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-

6 15.7.4 In cement mortar Cum 5.00 2060.20 10301

15.23 Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

7 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 16.00 73.40 1174.4

8 15.56 Dismantling old plaster or skirting raking out joints and cleaning the Sqm

surface for plaster including disposal of rubbish to the dumping 153.60 54.65 8394.24

ground within 50 metres lead.

9 15.60 Disposal of building rubbish / malba / similar unserviceable, Cum

dismantled or waste materials by mechanical means, including

loading, transporting, unloading to approved municipal dumping

ground or as approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

8.31 green, black of any size as approved by Engineer-in-Charge, in sqm 108.00 1267.95 136938.60

skirting, risers of steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed

with pigment of matching shade complete

11 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4

11.7 graded stone aggregate 20 mm nominal size), including finishing cum 8.00 8595.15 68761.20

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

12 Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved

make, in all colours, shades, except White, Ivory, Grey, Fume Red

11.40 Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sqm 20.00 1439.40 28788.00

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

pointing the joints with white cement and matching pigments etc.,

9.1 Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fastener shall be paid for separately).

9.21 Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction

with frame of 1st class hard wood and well matched commercial 3

ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters:

14 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with Sqm

necessary screws

15 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm Sqm

minimum depth on all edges of flush door shutters (over all area of 46.20 462.35 21360.57

door shutter to be measured).

9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of

flush doors (cost of glass excluded) (overall area of door shutter to 0.00

16 9.24.1 Rectangular or square Sqm 20.00 199.15 3983.00

17 Providing and fixing IS : 3564 marked Aluminium die cast body

9.83 tubular type universal hydraulic door closer with necessary Each 10.00 1124.85 11248.50

accessories and screws etc. complete.

Providing and fixing aluminium tower bolts ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or shade with necessary

screws etc. complete :

20 Providing and fixing aluminium pull bolt lock, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868)

9.98 transparent or dyed of required colour and shade, with necessary Each 20.00 100.80 2016.00

screws bolts, nut and washers etc. complete.

Providing and fixing aluminium handles of approved make anodized

(anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or shade with necessry

screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI

marked anodised (anodic coating not less than grade AC 10 as per IS

: 1868) transparent or dyed to required colour and shade with

necessary screws etc. complete.

23 9.101.1 Single rubber stopper Each 20.00 39.60 792.00

9.117 Providing and fixing factory made uPVC door frame made of uPVC

extruded sections having an overall dimension as below (tolerance

±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door Rmt

frame to be Jointed with galvanized brackets and stainless steel

screws, joints mitred and Plastic welded. The hinge side vertical of

24 9.117.1 Extruded section profile size 48x40 mm Rmt 39.60 270.20 10699.92

9.118 Providing and fixing to existing door frames.

25 9.118.1 24 mm thick factory made PVC door shutters made of styles and

rails of a uPVC hollow section of size 59x24 mm and wall thickness 2

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

26 9.48.2 MS Grills for windows

Fixed to openings

Providing and fixing Collapsible gate

13.1 12 mm cement plaster of mix :

13.2 15 mm cement plaster on the rough side of single or half brick wall

30 13.11 18 mm cement plaster in two coats under layer 12 mm thick cement Sqm

plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm

thick cement plaster 1:6 (1 cement: 6 fine sand).

13.16 6 mm cement plaster of mix : 0.00

32 13.80 Providing and applying white cement based putty 1mm on plaster Sqm

13.83 Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50

grams/ litre. of approved brand and manufacture, including applying 0.00

additional coats wherever required to achieve even shade and

13.85 Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound )

34 13.85.3 With water thinnable cement primer on wall surface having VOC Sqm 73.95

content less than 50 grams/litre.

35 13.21 Extra for providing and mixing water proofing material in cement

plaster work in proportion recommended by the manufacturers. 37.08 22.10 819.47

36 Painting with synthetic enamel paint of approved brand and

13.99.1 manufacture of required colour to give an even shade : One or more sqm 100.00 102.80 10280.00

coats on old work

Dismantling works

37 Dismantling W.C. Pan of all sizes including disposal of dismantled

14.82 materials i/c malba all complete as per directions of Engineer-in each 4.00 134.10 536.40

38 Dismantling doors, windows and clerestory windows (steel or wood)

shutter including chowkhats, architrave, holdfasts etc. complete and

stacking within 50 metres lead

Of area 3 sq. metres and below.

39 Dismantling tile work in floors and roofs laid in cement mortar

15.23.1 including stacking material within 50 metres lead. sqm 16.00 73.40 1174.40

For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

15.52 including stacking of useful materials near the site and disposal of each 4.00 112.05 448.20

unserviceable materials within 50 metres lead.

41 Dismantling old plaster or skirting raking out joints and cleaning the

15.56 surface for plaster including disposal of rubbish to the dumping sqm 50.00 54.65 2732.50

ground within 50 metres lead.

Aluminium works 0.00

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular

sections/appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and

screws or with fixing clips, or with expansion hold fasteners

including necessary filling up of gaps at junctions, at top, bottom

and sides with required PVC/neoprene felt etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed echanically

wherever required including cleat angle, Aluminium snap beading

for glazing / paneling, C.P. brass / stainless steel screws, all complete

as per architectural drawings and the directions of Engineer-in-

charge. Glazing and paneling to be paid for separately) :

21.1.1 For fixed portion.

42 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating kg

For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings

21.1.2 wherever required including the cost of EPDM rubber / neoprene 0.00

gasket required (Fittings shall be paid for separately)

43 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating

44 Providing and fixing glazing in aluminium door, window, ventilator sqm

shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

With float glass panes of 4.0 mm thickness

45 10.28 Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on

the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.).

Repair with New Technologies

Chipping of unsound/weak concrete material from slabs, beams,

columns etc. with manual Chisel and/ or by standard power driven

percussion type or of approved make including

26.28.1 tapering of all edges, making square shoulders of cavities including sqm 45 378 17010.00

cleaning the exposed concrete surface and reinforcement with wire

brushes etc. and disposal of debris for all lead and lifts all complete

as per direction of Engineer-In-Charge. 75mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to

give it a total rust free steel surface by using alkaline chemical rust

remover of approved make with paint brush and removing loose

particles after 24 hours of its application with wire brush and

thoroughly washing with water and allowing it to dry, all complete

as per direction of Engineer-In-Charge.

Providing, mixing and applying bonding coat of approved adhesive

26.31 on chipped portion of RCC as per specifications and direction of

Engineer-In-charge complete in all respect.

49 Epoxy bonding adhesive having coverage 2.20 sqm/kg

of approved make

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

Sanitary & Plumbing

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous

china flushing cistern & C.P. flush bend with fittings & C.I. brackets,

40 mm flush bend, overflow arrangement with specials of standard

make and mosquito proof coupling of approved municipal design

complete, including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

50 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid Nos 8.00 7874.30 62994.40

Providing and fixing white vitreous china flat back or wall corner

type lipped front urinal basin of 430x260x350 mm and

340x410x265 mm sizes respectively with automatic flushing cistern

with standard flush pipe and C.P. brass spreaders with brass unions

and G.I clamps complete, including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :

51 One urinal basin with 5 litre white P.V.C. automatic flushing cistern

52 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:

White Vitreous China Wash basin size 630x450 mm

with 15 mm C.P. brass pillar taps

53 17.22A Providing and fixing CP Brass 32 mm size Bottle Trap of approved

quality & make and as per the direction of Engineer-in-charge. Nos 8.00 1034.8 8278.40

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS:13983 with C.I. brackets and stainless steel plug 40 mm,

including painting of fittings and brackets, cutting and making good

the walls wherever required:

17.10.1 Kitchen sink with drain board Nos

55 White Vitreous China Surgeon type wash basin of size 660x460 mm

17.7.9 with single 15 mm C.P. brass pillar taps with elbow operated levers Nos 2.00 2940.50 5881.00

56 Providing & fixing stone slab table rubbed, edges rounded and

polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal

patitions by cutting chase of appropriate width with chase cutter

8.10.1 and embedding the stone in chase with epoxy grout or with cement Each 2.00 3500.45 7000.90

concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste

6mm nominal size) as per Engineer-in-charge and finished smooth

57 17.32 Providing and fixing mirror of superior glass (of approved quality)

and of required shape and size with plastic moulded frame of

approved make and shade with 6 mm thick hard board backing : Each 8.00 1361.80 10894.40

Rectangular shape 453x357 mm

58 17.70.1 Providing and fixing PTMT Bottle Trap for Wash basin.

Bottle trap 31 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the waste Each 5.00 367.10 1835.50

coupling 77 mm breadth with 25 mm minimum water seal, weighing

not less than 260 gms.

59 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 Each

mm high and 112 mm distance from wall of standard shape with

bracket of the same materials with snap fittings of approved quality 5.00 168.35 841.75

and colour weighing not less than 105 gms.

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

60 17.72 Providing & fixing PTMT towel ring trapezoidal shape 215 mm long Each

200 mm wide with minimum distance of 37 mm from wall face with

concealed fittings arrangement of approved quality and colour

weighing not less than 88 gms

61 18.51.1 Providing and fixing C.P. brass long body bib cock of approved Each

quality conforming to IS standards and weighing not less than 690

15mm nominal bore

62 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and Each

geyser points of approved quality conforming to IS 8931 a) 15 mm 10.00 574.30 5743.00

63 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 Each

metre long with S.S. triangular plate to Eureopean type W.C. of

quality and make as approved by Engineer - in-charge

64 18.22.2 Providing and fixing CP Brass shower rose with 15 or 20 mm inlet, Each

150 mm diameter

18.8 Providing and fixing CPVC pipes having thermal stability for hot and

cold water supply including all CPVC plain and brass threaded

fittings including fixing the pipe with clamps at 1.00 mt spacing. this

includes jionting of pipes and fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the wall

same including testing of joints complete as per the direction of

engineer incharge

65 concealed work including cutting chases and making good the wall

20 mm nominal outer dia pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal

ring conforming to IS : 5382, leaving 10 mm gap for thermal

expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

12.42.4.2 conforming to IS : 13592 Type A, including jointing with seal ring Each 5.00 221.35 1106.75

conforming to IS : 5382, leaving 10 mm gap for thermal

expansion:Single tee with door 110x110x110 mm

68 Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

12.42.5.2 conforming to IS : 13592 Type A, including jointing with seal ring Each 15.00 150.35 2255.25

conforming to IS : 5382, leaving 10 mm gap for thermal

expansion:Bend 87.5° 110 mm bend

69 Providing and fixing on wall face unplasticised - PVC moulded

fittings/accessories for unplasticised Rigid PVC rain water pipes

12.42.6.2 conforming to IS : 13592 Type A, including jointing with seal ring Each 3.00 131.85 395.55

conforming to IS : 5382, leaving 10 mm gap for thermal

expansion:Shoe (Plain) 110 mm Shoe

Providing and fixing trap of self cleansing design with screwed down

or hinged grating with or without vent arm complete, including cost

of cutting and making good the walls and floors :100 mm inlet and

100 mm outlet Sand Cast Iron S&S as per IS: 1729

Electrical works

WIRING AND SUB MAINS

71 1.3.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point Point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed heavy class Steel conduit, with modular

switch, modular plate, suitable GI box and earthing the point with 150.00 1845.00 276750.00

1.5 sq.mm. FRLS PVC insulated copper conductor single core cable

etc as required.a) Group C

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

72 1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated RMT

copper conductor single core cable in surface/ recessed Steel

conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper 792.00 433.00 342936.00

conductor single core cable for loop earthing as required

1.7 Wiring for circuit/ submain wiring along with earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed Steel conduit as required.

76 1.17.1 Supplying and drawing following sizes of FRLS PVC insulated copper metre

conductor, single core cable in the existing surface/ recessed steel/

PVC conduit as required. 1x1.5 Sqm

77 1.31 Supplying and fixing suitable size GI box with modular plate and Each

cover in front on surface or in recess, including providing and fixing

3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, 75.00 477.00 35775.00

connection etc. as required. (For light plugs to be used in non

residential buildings).

78 1.32 Supplying and fixing suitable size GI box with modular plate and Each

cover in front on surface or in recess, including providing and fixing

6 pin 15/16 amps modular socket outlet and 15/16 amps modular 50.00 586.00 29300.00

switch, connection etc. as required.

79 2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, Each

socket outlet, with 2 pole and earth, metal enclosed plug top

along with 20 amps "C" curve, SP, MCB, in sheet steel

enclosure, on surface or in recess, with chained metal cover for the

socket out let and complete with connections, testing and

commissioning etc. as required.

80 1.25 Supplying and fixing stepped fan regulator on the existing modular Nos.

plate switch box including connections but excluding modular plate 28.00 369.00 10332.00

etc. as required.

81 1.26 Supplying and fixing of modular Blanking plate on the existing Each

modular plate & switch box excluding modular plate etc. as reqd. 20.00 40.00 800.00

82 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction Each

box/ wooden block including connections etc. as required. 100.00 87.00 8700.00

83 1.34 Supplying and fixing brass batten/ angle holder including connection Each

etc. as required.

DISTRIBUTION BOARDS 0.00

2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

86 2.11 Supplying and fixing single pole blanking plate in the existing MCB Each

DB complete etc. as required.

ERRECTION OF FAN & FIXTURE 0.00

88 1.41 Installation, testing and commissioning of pre-wired, fluorescent each

fitting / compact fluorescent fitting / LED Fittings of all types,

with all accessories and tube etc. directly on ceiling/ wall,

including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as required.

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

89 19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, each

BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air

delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-

2019), THD less than 10%, remote or electronic regulator unit for 28.00 2730.00 76440.00

speed control and all remaining accessories including safety pin, nut

washers, temperature rise=75 degree C (max.), insulation resistance

more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

1.5 Installation of exhaust fan in the existing opening, including

making good the damage, connection, testing, commissioning etc. 0.00

91 1.51 Extra for fixing the louvers/ shutters complete with frame for a each

exhaust fan of all sizes.

92 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick Set

including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 metre 3.00 13838.00 41514.00

long etc. with charcoal/ coke and salt as required.

93 5.14 Providing and fixing 25 mm X 5 mm Copper. strip on surface or in Mtr

recess for connections etc. as required.

Supplying and making ends termination with brass compression

glands and aluminium lugs for following size of PVC insulated PVC

sheathed aluminiumconductor cable of 1.1 KV grade as required .

95 MR Fabrication and installation of cubical panel with following

Approved accessories made of 16 SWG M.S sheet painted with one coat steel

by, Sail primer and two coat power spray painting with approved shade

Rourkela making PCC plinth and foundation including fitting / fixing /

connection & transportation up to work site , labour charge etc all

complete.150 amp, 4 pole MCCB 16 KA = 1 Nos. 100 amp, 4 pole

MCCB 16 KA = 1 Nos. 32 amp, double pole MCB = 6 Nos. 63 amp,

double pole MCB = 6 Nos. 100 amp, 4 pole changeover switch = 1

Nos. Indecator lamp R/Y/B = 6 Nos. Volt -Meter digital = 2 Nos. Amp -

Meter digital = 2 Nos. C.T. coil 160 amp CT Ratio = 6 Nos. 10 sq mm

FRLS PVC insulated copper wire = 24 Mtr. 25mm x 5mm copper

Supply & Laying of 1.1KV grade multicore aluminium conductor

XLPE insulated and PVC sheathed armoured cable conforming to IS :

7098 (Part-I) 1998 along walls/ on existing cable trays etc. in an

approved manner and as per follows;

Fittings and Fixtures

SITC of light fixtures suitable for LED fixture, lamps with all

components and accessories including but not restricted to

reflectors, housings, lamp holders and including cost of ballasts and

cost of lamps complete as required and as below Make:- Bajaj,

Havells, Polycab or equivalent.

97 20W LED Tube light of Havells Cat Ref: Nos

LUMILINESMART20WLED865PCWH or equivalent.

98 NS 30W LED Flood Light of Havells Cat Ref: nos

JETAQUANTOPLUSFLP30WLED757SYMLENS or equivalent.

Name of Work- Comprehensive internal repair of Community Health Centre in Sector-9 including Civil, Electrical & Plumbing works.

DSR 2023 DSR- AMOUNT AMOUNT

SL NO ITEM DESCRIPTION UNIT QTY

Ref No. 2023 (DSR) (NON DSR)

Supplying and fixing of 12''/ 300 mm metal body exhaust fan of

(Make usha / Baja / polycab / orient / khaitan As per direction of

executive officer consumables required to complete the job in all 5.00 13000.00

respect shall be in the scope of the party necessary connections and

wiring shall be done by the party for proper functioning of the fans.

TOTAL AMOUNT (X) 4527285.21 415139.00

TOTAL AMOUNT (X) 4527285.21 415139.00